Re: My Dusty 71 GMC a Mother & Son Project
4 Attachment(s)
so then we spent 9 hours figuring out exactly precisely which fan spacer to run in order to get the best air flow (pronounced protect our fingers from getting sliced off by the fan)
|
Re: My Dusty 71 GMC a Mother & Son Project
2 Attachment(s)
mandatory stare and compare if you dare
|
Re: My Dusty 71 GMC a Mother & Son Project
Quote:
|
Re: My Dusty 71 GMC a Mother & Son Project
3 Attachment(s)
cool, so you replaced the water pump and the radiator and fixed the cooling issue, what's next?
not so fast Tiger - it wasn't until we fixed and dialed in our distributor that the overheating problem went away I believe we discovered that the old vacuum can was not vacuuming therefor not advancing the timing with manifold vacuum (highest at idle type of thing) |
Re: My Dusty 71 GMC a Mother & Son Project
1 Attachment(s)
mandatory stare and compare of the old not working/non adjustable vacuum canister and the new adjustable one
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
then we Geeked out and replaced the weights and springs in our dizzy to really dial it in
and let me tell you she runs cold with only holy water in the rad now |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
bruh, this is boring, don't you have some other bright ideas?
Me: "hold my beer!" got the cargo light working |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
also got the dome light working, sometimes ladies and gentlemen you gotstoo take the small victories, am I right or am I right?
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
energized by my electrical prowls I decided to take it up a notch
[yes this is from my "In love with cheap digital gauges - era!"] (no idea why I'm quoting myself?) |
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
Warning: if you think my gauge bazel cluster thingie has seen better days you should have seen it wrapped in upholstery and full of glue before i cleaned it up
|
Re: My Dusty 71 GMC a Mother & Son Project
5 Attachment(s)
yes one of the bottom four holes is crooked and no I did not cut it out like that, the PO must have done it, I would never hole saw a crooked hole (ha ha)
|
Re: My Dusty 71 GMC a Mother & Son Project
5 Attachment(s)
OMG, this gauge cluster is Fugly, how do we tell him?
hold on there Sparky it's about to get a whole lot worse it was a temporary solution so that we could take Dusty camping later on and not overheat or under charge the battery or God forbid go 97 in a 35 MPH zone type a thing |
Re: My Dusty 71 GMC a Mother & Son Project
What's your addy? I will send you a better bezel. Man turn that beaver loose out of your garage. :lol:
|
Re: My Dusty 71 GMC a Mother & Son Project
Quote:
|
Re: My Dusty 71 GMC a Mother & Son Project
Enjoying the build, and glad to get in on the ground floor at the beginning of a build thread of yours!
|
Re: My Dusty 71 GMC a Mother & Son Project
Quote:
|
Re: My Dusty 71 GMC a Mother & Son Project
Quote:
|
Re: My Dusty 71 GMC a Mother & Son Project
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMC a Mother & Son Project
3 Attachment(s)
so what is he going to do, the [ahem] suspense is killing me
did somebody say suspension? |
Re: My Dusty 71 GMC a Mother & Son Project
Now that doesn’t look too crazy not like it’s a set of switches to make Dusty jump
|
Re: My Dusty 71 GMC a Mother & Son Project
Is the C notch and dropped spindles coming this afternoon? :lol:
|
Re: My Dusty 71 GMC a Mother & Son Project
Quote:
|
Re: My Dusty 71 GMC a Mother & Son Project
1 Attachment(s)
now before we did anything first we had the truck laser scanned for precise and exact measurements and rendered this to scale drawing
Note: if your truck does not match these specs exactly, check your truck, there must be something wrong with your truck |
Re: My Dusty 71 GMC a Mother & Son Project
3 Attachment(s)
so if I recall correctly (mind you we did this 3 years ago) but lost the pics and only recently found some of them, we done did the rear coils first, by the way I love the trailing arm rear suspension on these trucks, so unique
|
Re: My Dusty 71 GMC a Mother & Son Project
1 Attachment(s)
alright, mandatory stare and compare
folks, does the stock rear coil spring look normal to you or does it look like it's been heated up and collapsed some? I ask because I don't know what they are supposed to look like, so any feedback is greatly appreciated |
All times are GMT -4. The time now is 05:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com