The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 4 of 4

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - 89 1500 parts ???? (https://67-72chevytrucks.com/vboard/showthread.php?t=371307)

68 TT

12-06-2009 11:01 AM

Re: 89 1500 parts ????

Quote:

Originally Posted by Lo78 (Post 3657648)

I took the inline out today. also welded in all the stake pockets on the bed. I was thinking about the ac unit out of the 89 , will that work in my truck? Thanks steve

It's possible the firewall forward part will fit but I highly doubt any of the under dash or control sections from the 1500 will fit a square body.

Aftermarket under dash assembly used with the factory 1500 compressor, engine mount brackets & condenser would be your best bet.

Lo78	12-06-2009 02:14 PM

Re: 89 1500 parts ????

Ok thanks 68tt

Lo78	12-06-2009 08:45 PM

Re: 89 1500 parts ????

hey 68tt my 78 came with factory ac so can i hook the 89 ac unit up to the 78 ac underdash and control sections thanks steve

cjracing15

12-06-2009 09:30 PM

Re: 89 1500 parts ????

Yes you can. I did it on my 86. You will need the hoses from a 1989-91 suburban with out rear air and if you use your 89 brackets it's a bolt in.

Lo78	12-07-2009 12:33 AM

Re: 89 1500 parts ????

WHATS WRONG WITH WITH THE HOSES FROM THE 89 1500 thanks steve

68 TT

12-07-2009 12:33 PM

Re: 89 1500 parts ????

Quote:

Originally Posted by Lo78 (Post 3659596)

WHATS WRONG WITH WITH THE HOSES FROM THE 89 1500 thanks steve

If I remember right they switched sides of the truck that the compressor was mounted on.

The compressor design is different too so the connector on the back is most likely different.

All times are GMT -4. The time now is 01:38 PM.

Page 4 of 4

Show 40 post(s) from this thread on one page