Re: parting a 72 highlander with AC now
 

Could you send me a left and right picture of the brackets that are attached to the truck frame that go to the motor mounts.
If they are the ones I need how much are they selling for Thanks
LOST ON LAND BUT NEVER AT SEA CAPT. KURT

Re: parting a 72 highlander with AC now
 

How much for the chrome ring and plate for ignition?
And/or the door locks if keys are available?
Ship to 47387 Thanks

Re: parting a 72 highlander with AC now
 

Walkersan, unsure of ratio, I won't be able to get ratio till next week, sorry
hatchaddict, shipping out fed ex Thurs
Capt Kurt, I'll try to get you a pic, I've already taken them off and the motor is just sitting in there
jcsbrat, It will be next week before I can get to that, the truck will still be here, sorry
Guys I getting ready to go to a swap meet Fri and Sat, so if you ask about parts I'll price and I need to know real quick if you want them so I won't sell them
Thanks Randy

Re: parting a 72 highlander with AC now
 

ok sounds good thanks again

Re: parting a 72 highlander with AC now
 

Thank you
If they fit my motor mounts I will need both of them
I was told my mounts are from a 1970 to 73 chevy truck
[ dropping a 292 inline 6 into my swampbuggy ]

Re: parting a 72 highlander with AC now
 

Randy

Thanks for the response. The truck has sat for a few years, another week won't hurt anything.

Good luck at the swap meet.

Shawn

Re: parting a 72 highlander with AC now
 

Just read through the thread. Doesn't look like anyone claimed the shoulder belt mounting bolts or the rectangular cast metal A/C dash vent housing if you have these parts. If you do, how much shipped to 15317? Thanks.
Terry

Re: parting a 72 highlander with AC now
 

capt Kurt, inline 6's take different brackets
Walkersan, I'll get a ratio sometime this week
vette442, Terry, bolts are sold. Not sure on what your meaning on AC piece? The one under AC control?
Thanks Randy

Re: parting a 72 highlander with AC now
 

I have the brackets on my inline 292 chevy.
I also have the motor mounts that are from 1970 to 1973 chevy on the 292 brackets.
I need the 2 brackets from the trucks frame to the motor mounts.
can you send me a picture of both of them and measure across from hole to hole on the top that connects to the motor mount thanks. Capt KurtKurt

Re: parting a 72 highlander with AC now
 

I have to apologize, I sold my sets that I had at the swap meet this weekend. I'm sorry. I'll have another set in a week or so on another truck. Thanks Randy

Re: parting a 72 highlander with AC now
 

Randy if you have the air cleaner and spacer from this truck I will take them as well. My list now has breather, spacer and set of valve covers with two oil fill plugs. Shoot me a pm with total, thanks Harold

Re: parting a 72 highlander with AC now
 

Harold, I have the air cleaner and spacer but have sold the valve covers already, sorry. I'll get you a total asap. Thanks Randy

Re: parting a 72 highlander with AC now
 

what all a/c parts are still avalible? im in need of a condensor and all the lines under the hood and a compressor. i bought all the stuff thats in cab or on the cab but i need the rest

Re: parting a 72 highlander with AC now
 

Do you still have the little clamp that holds the muffler to the AC pump? I also need the bolt that holds connects the muffler to the back of the AC pump. If so, how much shipped to 95357?

Re: parting a 72 highlander with AC now
 

hatchaddict, I'll get a pic of what I do have, do you need motor AC brackets?
70longhornCST, I'll see what is there
Thanks Randy

Re: parting a 72 highlander with AC now
 

yes i do need ac comp brackets too thanks

Re: parting a 72 highlander with AC now
 

Sorry for delay guys I'm down in the back, I'll try to get pics when I get around a bit. Thanks Randy

Re: parting a 72 highlander with AC now
 

im in no hurry it just gives me time to save up the cash

Re: parting a 72 highlander with AC now
 

Hey Randy,
This truck is going kuik, anyway did you still have those auto dealership badges on the cowl still. I am in no hurry. I just wish I could go to your house and by a bunch of stuff. I need a few big items like top Longhorn trim and a decent tailgate, but I am way out here in Cali. Hope your feeling better if I read your post right, take care.
R/
Billy

Re: parting a 72 highlander with AC now
 

randy,
i would like the 7 blade fan as long as it fits a stock fan shroud.
can you let me know a price shipped to 08527 and a measurement across tip to tip.

thanks john

Re: parting a 72 highlander with AC now
 

Randy,

Got the alt. brackets. Look good. Thanks!

Re: parting a 72 highlander with AC now
 

Hatchaddict, I'll hopefully be back at it Mon
Billy, I hurt my back so I'm taking it easy. The badges have some pitting on them, I'll get a pic
John, sorry sold the fan at the swap meet, sorry
K5hart, glad they go there OK, Thanks
Randy

Re: parting a 72 highlander with AC now
 

hey randy i hope your back is getting better. whenever you get back at it i need to see what all a/c stuff you got cause the stuff i was going to buy for my cab from a local was all trash so i didnt buy it, so i need a whole complete a/c system from inside out or as much of it as you have including the cowl door and the passenger vent door stuff. i dont need the wiring but i do need the switches and relays and stuff thanks and im in no hurry so get better first

Re: parting a 72 highlander with AC now
 

Hatchaddict, back is doing a bit better, I'm going to Dr Mon afternoon for a CT scan, they think I have a Ulcer or Pancreas problems now along with back issues. Anyway sorry for the soap opera. I'm going to try to get together all I have for one. I know I don't have any good lines that go from under battery box to dryer and also no lines form dryer to condensor. I have a used dryer and brackets, condensor, compressor brackets, lines that go from compressor to box on outer firewall. I don't have the flapper in cowl. I have the pass side vent. I have some of the stuff under dash but not all. I have a good ac control and all dash vents. I'll try to get what i have all together either Mon after I get back or Tues after I get off work, Its all still in my enclosed trailer boxed up from swap meet. I have another truck bought but won't be getting it till next Mon. I may have another BB AC truck bought going to try to go look at it next Sat. Thanks Randy

Re: parting a 72 highlander with AC now
 

thanks i appriciate it. i have a good a/c wire harness and i have all the dash vents and a good control and i have a new dryer, i will need the inner and outer boxes, compressor, brackets, condensor, dryer brackets, the pass vent, and whatever else you have to help me build a complete a/c system