The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   Dynatech MuscleMaxx Headers (https://67-72chevytrucks.com/vboard/showthread.php?t=445414)

mooseknuckles 02-12-2012 11:20 AM

Re: Dynatech MuscleMaxx Headers
 
sweet...we need more info and pics man...

68GMCCustom 02-12-2012 02:39 PM

Re: Dynatech MuscleMaxx Headers
 
yes more pics! what oil pan are you running?

2nd S.O.B. 02-12-2012 03:19 PM

Re: Dynatech MuscleMaxx Headers
 
BigShoe24, I sent you a pm

softballnrd27 02-14-2012 11:24 AM

Re: Dynatech MuscleMaxx Headers
 
Has anyone tried the 70-81 or 67-69 camaro dynatechs on a squarebody? I tried a set of pacesetter headers for a 98-02 F-Body and they didn't fit at all on the driver's side.

mac72 02-14-2012 03:42 PM

Re: Dynatech MuscleMaxx Headers
 
Quote:

Originally Posted by BigShoe24 (Post 5182585)
They worked!

they fit nice dont they

dkauffman05 02-14-2012 09:16 PM

Re: Dynatech MuscleMaxx Headers
 
I put some 98-02 e-bay stainless f-body headers on a square body with 1" setback plates and had no prob on the driver side.

Mr. 250r 02-14-2012 09:47 PM

Re: Dynatech MuscleMaxx Headers
 
man i have dirty dingo mounts and mine in probably the middle of the slider were like 2 inches away from tranny mine are set almost all the way back and my motor is about 3/4in off the firewall and i can't use the ac unit by any means but i didn't like its dumb lower mount anyways where do yours sit at in the sliders?

softballnrd27 02-15-2012 11:46 AM

Re: Dynatech MuscleMaxx Headers
 
Quote:

Originally Posted by dkauffman05 (Post 5188698)
I put some 98-02 e-bay stainless f-body headers on a square body with 1" setback plates and had no prob on the driver side.

Do you have any pics?

My mounts are pretty close to stock bc I kept my trans in the same spot so I can re-use my current driveshaft.

nibs 02-15-2012 02:30 PM

Re: Dynatech MuscleMaxx Headers
 
Hmmm, just wondering if they make the same layout just with smaller primaries... Id like to keep them in the 1 5/8-1 3/4" range.

mooseknuckles 02-17-2012 06:37 PM

Re: Dynatech MuscleMaxx Headers
 
so is there a verdict on this??

dkauffman05 02-17-2012 08:10 PM

Re: Dynatech MuscleMaxx Headers
 
All i have for a computer is a kindle fire so i have no way of uploading pics. I might be getting a free desktop this weekend and if i do i will try to get some pics Of the headers on.

mooseknuckles 02-17-2012 09:16 PM

Re: Dynatech MuscleMaxx Headers
 
I'm askin if the dynotech headers (70-81 camaro) fit on a c10????....and if so do they hang below the frame???

dkauffman05 02-19-2012 10:44 AM

Re: Dynatech MuscleMaxx Headers
 
I got my 5.3 dropped in to mock up motor mounts and check header figment. Had to pull my stands just forward of the v8 holes and the headers literally slid right in.

mooseknuckles 02-19-2012 11:27 AM

Re: Dynatech MuscleMaxx Headers
 
Quote:

Originally Posted by dkauffman05 (Post 5198009)
I got my 5.3 dropped in to mock up motor mounts and check header figment. Had to pull my stands just forward of the v8 holes and the headers literally slid right in.

.....and there not hangin below the frame right???

BigShoe24 02-19-2012 07:44 PM

Re: Dynatech MuscleMaxx Headers
 
mooseknuckles,

I think they hang below if you running a stock crossmember. I've got a PB crossmember and also raised the trans crossmember and I clear well.

mooseknuckles 02-19-2012 08:33 PM

Re: Dynatech MuscleMaxx Headers
 
well...I got a stock crossmember, but I'm also "Z" 3".....so I guess I'm going to find out if they fit soon enough....

dkauffman05 02-19-2012 09:07 PM

Re: Dynatech MuscleMaxx Headers
 
I have a stock crosmember so yes the hang down identical to 68gmccustom's pics.

mooseknuckles 02-29-2012 05:05 PM

Re: Dynatech MuscleMaxx Headers
 
1 Attachment(s)
headers are here....

dkauffman05 02-29-2012 08:27 PM

Re: Dynatech MuscleMaxx Headers
 
Make sure you got metric header bolts. Mine came with sae. I called dynatech and they promptly sent new hardware.

mooseknuckles 02-29-2012 08:33 PM

Re: Dynatech MuscleMaxx Headers
 
yep...came with m8x 25mm...

softballnrd27 02-29-2012 10:16 PM

Re: Dynatech MuscleMaxx Headers
 
When you putting them on?
Posted via Mobile Device

mooseknuckles 02-29-2012 11:10 PM

Re: Dynatech MuscleMaxx Headers
 
Quote:

Originally Posted by softballnrd27 (Post 5221685)
When you putting them on?
Posted via Mobile Device

it's gonna be a little while yet..

jtp67-72 02-29-2012 11:30 PM

Re: Dynatech MuscleMaxx Headers
 
[QUOTE=mooseknuckles;5221879]it's gonna be a little while yet..[/QUOT

These are the 70-81 Camaro versions?? thanx...........jim

mooseknuckles 02-29-2012 11:37 PM

Re: Dynatech MuscleMaxx Headers
 
[quote=jtp67-72;5221933]
Quote:

Originally Posted by mooseknuckles (Post 5221879)
it's gonna be a little while yet..[/QUOT

These are the 70-81 Camaro versions?? thanx...........jim

yep...70-81 camaro...3" collector

mooseknuckles 02-29-2012 11:39 PM

Re: Dynatech MuscleMaxx Headers
 
pn# 715-29410


All times are GMT -4. The time now is 10:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com