The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 4 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- 1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=212)

- - Tina, A patina 69 burb project (https://67-72chevytrucks.com/vboard/showthread.php?t=526670)

sunk99

03-12-2013 01:41 PM

Re: Tina, A patina 69 burb project

Quote:

Originally Posted by Hart_Rod (Post 5942315)

Great progress! I notice you said you were using a Fbody oil pan with the ECE motor mounts. Have you tested fitted the pan yet? I tried that on my burb and had to switch to a Cadillac CTsV pan do to interference with the front crossmember.

Thanks!
No I have not test fitted yet, hope to within the next month. Thanks for the heads up, hope it's not a problem. I have been waiting on Thunder racing to ship my cam so I can assemble the engine and It was shipped yesterday so maybe I can get it back together this weekend.
Posted via Mobile Device

Hart_Rod

03-12-2013 01:59 PM

Re: Tina, A patina 69 burb project

Quote:

Originally Posted by sunk99 (Post 5942459)

If you look at my build thread I show pictures of the fitment issues with the FBody pan. I'm pretty sure you're going to have to use a different pan.
Posted via Mobile Device

sunk99

03-12-2013 02:13 PM

Re: Tina, A patina 69 burb project

Quote:

Originally Posted by Hart_Rod (Post 5942503)

If you look at my build thread I show pictures of the fitment issues with the FBody pan. I'm pretty sure you're going to have to use a different pan.
Posted via Mobile Device

I sent you PM . Where did you get your CTS V pan?
Posted via Mobile Device

Hart_Rod

03-12-2013 04:10 PM

Re: Tina, A patina 69 burb project

I got mine at the dealership but I bet you can probably find them on eBay also.
Posted via Mobile Device

sunk99

03-13-2013 08:06 AM

Re: Tina, A patina 69 burb project

Thanks Hart_Rod! I didn't want to change the oil pan twice so I ordered a CTS V pan last night. I now have an F body pan and a truck pan for sale!
Posted via Mobile Device

Hart_Rod

03-13-2013 08:30 AM

Re: Tina, A patina 69 burb project

Quote:

Originally Posted by sunk99 (Post 5944159)

Thanks Hart_Rod! I didn't want to change the oil pan twice so I ordered a CTS V pan last night. I now have an F body pan and a truck pan for sale!
Posted via Mobile Device

Glad I could help. I just didn't want you going through what I did, :lol:. The FBody pan should sell pretty quickly. It works with nearly every other motor mount setup. If you don't have any luck on our board, post it for sale on LS1Tech, it will go quickly there.

5150	03-13-2013 08:58 AM

Re: Tina, A patina 69 burb project

You shouldn't have a problem selling that F-body pan on the board to somebody.
Posted via Mobile Device

sunk99

04-13-2013 11:03 AM

Re: Tina, A patina 69 burb project

1 Attachment(s)

Engine going back together, installed a Thunder Racing TR220 cam kit,ls2 timing chain,ls2 lifters, GM high volume oil pump, and ls2 lifter trays.
Posted via Mobile Device

hotrodchevy1999

04-14-2013 08:00 AM

Re: Tina, A patina 69 burb project

Nice Very Nice

sunk99

05-24-2013 09:47 PM

Re: Tina, A patina 69 burb project

2 Attachment(s)

Got the engine and trans. Installed today with the help of a couple of buddy's, also got the Boyd tank mounted.Trying to figure out how to adapt the nylon fuel lines to the tank now or trying to decide if I should just bite the bullet and run braided or hard line.
Posted via Mobile Device

Hart_Rod

07-15-2013 01:10 PM

Re: Tina, A patina 69 burb project

bump

ryeguy2006a

07-15-2013 03:05 PM

Re: Tina, A patina 69 burb project

Sweet project!!

sunk99

07-15-2013 03:33 PM

Re: Tina, A patina 69 burb project

Thanks!
Posted via Mobile Device

HSRACER

10-16-2013 05:49 PM

Re: Tina, A patina 69 burb project

Any updates? Last one was July!

sunk99

10-28-2013 10:13 AM

Re: Tina, A patina 69 burb project

4 Attachment(s)

Here are the only ones that I have. Been trying to tune and tweek on it and finally got it running and driving good, after going thru 2 ECM'S 2 sets of injectors, removing the wiring harness and a few other glitches I had I can say the LSX was worth it.next up is to finish the AC install and interior.

lolife99

10-28-2013 10:36 AM

Re: Tina, A patina 69 burb project

Such a cool burb!^^^

Number98

10-28-2013 10:57 AM

Re: Tina, A patina 69 burb project

Quote:

Originally Posted by lolife99 (Post 6336471)

Such a cool burb!^^^

I couldn't agree more! She looks great man!!

HSRACER

10-28-2013 11:43 AM

Re: Tina, A patina 69 burb project

Awesome. Thanks for sharing.

sunk99

10-28-2013 11:47 AM

Re: Tina, A patina 69 burb project

4 Attachment(s)

Quote:

Originally Posted by lolife99 (Post 6336471)

Such a cool burb!^^^

Thanks! Here are a few more pics of some progress I have made on the interior.

blfuller123

10-28-2013 11:49 AM

Re: Tina, A patina 69 burb project

Quote:

Originally Posted by lolife99 (Post 6336471)

Such a cool burb!^^^

Yup!!!

sunk99

10-28-2013 11:58 AM

Re: Tina, A patina 69 burb project

2 Attachment(s)

Couple more. Rear A/C, and bucket seats.

BB72CHEVKT

10-28-2013 01:18 PM

Re: Tina, A patina 69 burb project

looks bad ass

Jonboy

10-28-2013 03:59 PM

Re: Tina, A patina 69 burb project

Truck looks great. What is the steering wheel out of originally?

Rochlow

10-28-2013 04:50 PM

Re: Tina, A patina 69 burb project

looks great!

sunk99

10-28-2013 05:02 PM

Re: Tina, A patina 69 burb project

Quote:

Originally Posted by Jonboy (Post 6336947)

Truck looks great. What is the steering wheel out of originally?

A late 70's Corvette.

All times are GMT -4. The time now is 08:15 PM.

Page 4 of 6

Show 40 post(s) from this thread on one page