![]() |
Re: The Tiki Sea 10
Quote:
|
Re: The Tiki Sea 10
Quote:
|
Re: The Tiki Sea 10
Are you debating sheen or powder coat verses paint?
|
Re: The Tiki Sea 10
Quote:
|
Re: The Tiki Sea 10
I don't remember the percentage of gloss, but the satin black that I like and use on all my products is a number BK-08. I believe that is a Cardinal number?
|
Re: The Tiki Sea 10
Quote:
|
Re: The Tiki Sea 10
the lower the sheen the less imperfections you'll show..
depending on the coating material most will/can add the flatting agent to acquire any finish you want. the higher the sheen the higher the solids you have on the finish.. if you want a low sheen finish but the high solids shoot the gloss then add a finish coat of clear to what ever reflective amount you want to deaden the sheen I could write a book on the issue of powder or paint,, but thats your call.. its something I've been doing since 1967 |
Re: The Tiki Sea 10
That's it....only '67? C'mon son, I'm sure if you keep at it, you'll get the hang of it eventually. Don't lose hope.
Good stuff, thanks for the info. Not always sure about lingo or how to get to where I'm going....but will know when I'm there:lol: |
Re: The Tiki Sea 10
A little sneak peek....
Pressure washed the frame before sending to powdercoat. While at the powdercoater, they did an initial blast of the frame to get the majority of the crud off. After that, it was put into the oven and 'baked' raw, then blasted a second time... then off to powder. Came out nice... http://i137.photobucket.com/albums/q...psxyauoajl.jpg http://i137.photobucket.com/albums/q...pslnopvdhz.jpg |
Re: The Tiki Sea 10
Looks really nice.. clean job
|
Re: The Tiki Sea 10
Wow! We'll all want to see more of that chassis!
|
Re: The Tiki Sea 10
Any updates here? Patiently waiting :lol:
|
Re: The Tiki Sea 10
Very nice build can't wait to see how it turns out.
|
Re: The Tiki Sea 10
Frame looks nice… you sold me on powder, durable and clean. I don't know how many frames I've scraped, blasted, primed, sanded and painted but it's way too many. Another Ah-Ha moment. Thanks!:metal:
|
Re: The Tiki Sea 10
very nice bead rolling..you should offer up your skills to do panels for Members,,,hint hint...
|
Re: The Tiki Sea 10
how did this truck turn out
|
All times are GMT -4. The time now is 01:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com