![]() |
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
I need to find some A arms to rebuild and notch the bottom out like that for my coil springs! Lookin' good man, lookin good. Hey as long as your welds hold, I guess thats all that matter!
Were ya able to score the disc brake front crossmember? |
Re: The '67 Burb Build Thread
it already had them on it when i bought it from my friend, he is the one that did the disc swap (complete crossmember disc to disc). but i added the power brakes to it.
|
Re: The '67 Burb Build Thread
sorry no pics. but the other lower a arm is cut and welded up, didnt shorten them though. still need to re sand blast them then i can put the cross shafts and stuff back in and paint them. then get some bags and install them as well lol.
|
Re: The '67 Burb Build Thread
:ito: whats up amigo .... greetings from Cali... very cool burban build...
|
Re: The '67 Burb Build Thread
thanks, hows it going, where at in cali are you?
|
Re: The '67 Burb Build Thread
Quote:
Quote:
:lol: 2 1/2 year later response... So Cal clothing is owned and operated by No Fear Inc. After I read that you wanted a one piece side window I saw your build thread and just read the entire build. Looks good I'll keep an eye on this for sure! |
Re: The '67 Burb Build Thread
haha its ok lol. and thanks. not a whole lot to read, mostly pics. makes it easier on people trying to catch up and what not
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
3 Attachment(s)
making some templates to box the lower arms in, and also got my 3" drop spindles.
Attachment 678064 Attachment 678065 Attachment 678066 |
Re: The '67 Burb Build Thread
3 Attachment(s)
got a free '68 a/c dash from a buddy today, just had to remove it from the cutup cab
Attachment 679182 Attachment 679183 Attachment 679184 |
Re: The '67 Burb Build Thread
the dash looks cool ,it will look like a 68 suburban with the markers filled
|
Re: The '67 Burb Build Thread
nice score u plan on adding ac?
Posted via Mobile Device |
Re: The '67 Burb Build Thread
eventually it will have a/c, but dont know how far down the road that will be. want to run a vintage a/c style setup. so i figured get that and add it to the truck so it will already be their when i am ready
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
thats what i was thinking lol.
|
Re: The '67 Burb Build Thread
no pics but i picked up another set of bags and some fittings to run them shraders, some 2600 doms. will be installing those in the back and removing the dual 3/4 port 4 ply 2600 contis and putting them in the front. also picked up a few more tools to use when working on the truck.
edit: on that dash i will be cutting the center section out and plating it so its smooth then i will cut a new hole in it lower down for the in dash i plan to run. might add a few other things to as well just not sure what yet. |
Re: The '67 Burb Build Thread
ordered a double adjustable panhard bar today from porterbuilt :devil:. i already cant wait for it :lol::metal:
|
Re: The '67 Burb Build Thread
nice..
make sure you get the longest one they sell.i got the short one by mistake. instead of sending it back, i sectioned the metal and welded a solid rod in the middle to make it reach...sure hope my welds hold lol |
Re: The '67 Burb Build Thread
thanks, and i'm pretty stoked to have my first piece from the porterbuilt line coming and will hopfully be buying more from him down the road. the one that i ordered from him is the same one that comes in his stage 2 drop kit, it mounts just like the cpp double adjustable track bar.
|
Re: The '67 Burb Build Thread
5 Attachment(s)
here is another pic of the burb as it sits right now, just in the garage.
Attachment 681266 stocking up on some parts and tools, still more to come Attachment 681267 some 2600 dominators and a couple fittings to run on shraders Attachment 681268 cpp front upper shock relocating brackets Attachment 681269 and the grey dash pad that i bought from gringoloco Attachment 681270 |
Re: The '67 Burb Build Thread
nice! i could have sent ya the t's i used when i ran temporary schraders...they are 1/2" t's with the schrader in the middle.
also, what shock ya plan on goin with? i bought some 50's chrysler shocks and they bolt right up...just installed them last night. i havent put the wheels back on yet to check fully inflated and fully deflated to see if they bottom out, but they sure are a cheap alternative. |
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
oh, well since you have the relocation kits im pretty sure your stock shocks should work. the ones i bought are Monroe pn#5752, got them at O'reilly for $22.99 each. heres a pic..
http://images.oreillyauto.com/parts/img/mon/5752.jpg the only thing i had to do was trim the bushing a little to make it fit in between the mount..but i believe my mounts are after market (the nut for the bolt would hit the arm next to the mount as it got tighter) ill snap a pic tomorrow when i get off work |
Re: The '67 Burb Build Thread
haha for sure thanks bro.
|
Re: The '67 Burb Build Thread
1 Attachment(s)
Not tryin to jack your thread, but "Rockstars" look pretty damn good on laid out black Suburbans!
In your sig - "...and black 20" wheels and tires (20" KMC Rockstars eventually)" |
Re: The '67 Burb Build Thread
haha no problem, that is a pretty sweet burb minus the green flames, ugly tail lights, and newer front end though.
|
Re: The '67 Burb Build Thread
man that does look good!
|
Re: The '67 Burb Build Thread
Nice build!!
|
Re: The '67 Burb Build Thread
thanks, still a long way to go though
|
Re: The '67 Burb Build Thread
hey bro, heres a few pics of the driver side shock..
http://i5.photobucket.com/albums/y15...114_161331.jpg top mount.. http://i5.photobucket.com/albums/y15...114_161338.jpg bottom mount.. http://i5.photobucket.com/albums/y15...114_161346.jpg i havent checked it fully compressed yet since im working on painting the stock wheels, but when im done and get them back on and back on the ground ill snap a pic a see what it looks like compressed |
Re: The '67 Burb Build Thread
ok sweet thanks. how much did those run and where did you get them at???
|
Re: The '67 Burb Build Thread
they were about 23 bucks a piece at o'reilly, but i believe any parts store should carry them for about them price
i was gonna ask you, are you running/plan on running a front sway bar? |
Re: The '67 Burb Build Thread
at the moment i am running a sway bar, but plan on removing it after i put the bags in. that and the bags will all be independent from each other and have individual valves, gonna run at least 8 valves total. so i will not have any need for it, that and i want to be able to hit s/s, so thats also another reason why i will be removing it.
|
Re: The '67 Burb Build Thread
5 Attachment(s)
did some modification work on my new das that will end up in the burb. still need to cut the radio hole and do a few other things. might get it blasted but not sure on that yet.
Attachment 682137 Attachment 682138 Attachment 682139 Attachment 682140 Attachment 682141 |
Re: The '67 Burb Build Thread
1 Attachment(s)
|
Re: The '67 Burb Build Thread
wow!
|
Re: The '67 Burb Build Thread
haha yup lol, used an old cut up street sign that i have had. it was thicker metal, but that will work out better for me and the stereo. i also might end up putting in a newer tilt column with key in column, as they are probably alot cheaper and easier to find. but not to new as i dont think i want lights and wipers on the column. but we will see.
|
All times are GMT -4. The time now is 10:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com