![]() |
Re: 1967 C-10 LS POWERED Build
3 Attachment(s)
Well I haven't got much done here lately. I finally got my transmission built a few weeks ago. Called Dave over at Yank and got my converter ordered. Hopefully it'll be here by the end of this week and I will post up some pics of it and the transmission before the install. This last weekend we got the back glass put in and some little stuff like door handles and such.. here's a few pics..
|
Re: 1967 C-10 LS POWERED Build
great looking build. I love the blue with the rims, they set eachother off. Just something i have learned from my build, Get your rear suspension set up before getting it finished. Seriously, that power and stock springs/ shocks will not work. even if your just thinking about it in the future, get coil overs on there now. they will ride just fine and you can hook at the track when needed. Usually can find some for $150-300 each and do not take much work to put on. I wish i would have done it earlier in the build.
|
Re: 1967 C-10 LS POWERED Build
Quote:
Posted via Mobile Device |
Re: 1967 C-10 LS POWERED Build
slick man! looking great!
|
Re: 1967 C-10 LS POWERED Build
5 Attachment(s)
Well this thing is coming slowly, but surely. I finally got my converter about a week ago and I also bought a SFI flywheel from yank. I got everything bolted in a couple nights ago. Been playing around with the exhaust. I hung some 3 inch straight pipes and some elbows just to see how it would look. We had the stuff laying around so its cost effective lol! Well here's a few pics of the stuff..:metal:
|
Re: 1967 C-10 LS POWERED Build
Just came across this thread, very nice! I dig the wheel and tires and the whole look of it.
|
Re: 1967 C-10 LS POWERED Build
Well guys I finally got to fire this thing up for a bit yesterday, still got alot to do and alot more money to spend lol! heres a video if I can post it right..
http://youtu.be/OfpGuGXZ9Dw |
Re: 1967 C-10 LS POWERED Build
Sounds wicked!
Posted via Mobile Device |
Re: 1967 C-10 LS POWERED Build
I love this truck, its done right with out going way over the top. Keep up the great work man.
|
Re: 1967 C-10 LS POWERED Build
I agree :)
Quote:
|
Re: 1967 C-10 LS POWERED Build
Sounds perty nice..
|
Re: 1967 C-10 LS POWERED Build
did you run the factory truck acc. and just take the power sterring pump off then get a shorter belt?
|
Re: 1967 C-10 LS POWERED Build
About jumped out of the chair, lol, need to turn the volume down.:lol:
|
Re: 1967 C-10 LS POWERED Build
Quote:
Posted via Mobile Device |
Re: 1967 C-10 LS POWERED Build
Finally found me a short bed! It's in pretty good shape. Dad and me are going to pick it up within the next few hours. I'll post up some pics when I get it home.
|
Re: 1967 C-10 LS POWERED Build
3 Attachment(s)
Managed to get the bed picked up today and back to the shop. We started by taking the floor out of it, which consisted of a torch and a hammer lol! and after that back the truck underneath it and doing a little mach up. It's been 9 years since i've seen any kind of bed on this truck, its hard to get use to again lol. Only thing im having trouble with taking in is the gap between the cab and bed. the holes all line up fine its just been so long to remember what it use to look like. If anyone would post up a pic for me that would be great thanks!
|
Re: 1967 C-10 LS POWERED Build
3 Attachment(s)
...
|
Re: 1967 C-10 LS POWERED Build
3 Attachment(s)
..
|
Re: 1967 C-10 LS POWERED Build
5 Attachment(s)
...
|
Re: 1967 C-10 LS POWERED Build
Quote:
|
Re: 1967 C-10 LS POWERED Build
Quote:
|
Re: 1967 C-10 LS POWERED Build
Just joined this forum...just subscribed to this thread... Beautiful job...love the color!
-Scott http://www.sdkgarage.com/carpix/sig/03_Z06.jpg |
Re: 1967 C-10 LS POWERED Build
Great score on the bed.. Can't wait to see it in that beautiful shade of blue!
|
Re: 1967 C-10 LS POWERED Build
5 Attachment(s)
Haven't updated in awhile. Its getting closer and closer, but the closer it gets the more money i shell out. anyways.. got some pics of some progress. I went with the autometer gauges and the dolphin billet panel. I got the flaming river column from Frank. Got the rear end built last weekend. Went with Richmond 4.10 and a Detroit TrueTrac Locker. Installed it all with the richmond installation kit. Got the cross member plates made for the trailing arms to get the pinion angle correct.
|
Re: 1967 C-10 LS POWERED Build
4 Attachment(s)
Got the brackets made for the fuel cell. Made some aluminum brackets for the radiator support.
|
Re: 1967 C-10 LS POWERED Build
Really looking good.. Great work
|
Re: 1967 C-10 LS POWERED Build
What did you use to record the vid?? I want to post up a clip but my new galaxy III freaks out with the ex noise?? the clip sounds like crap..
|
Re: 1967 C-10 LS POWERED Build
Quote:
Posted via Mobile Device |
Re: 1967 C-10 LS POWERED Build
No I mean, what device to do the recording, phone cam corder.. etc
|
Re: 1967 C-10 LS POWERED Build
Quote:
Posted via Mobile Device |
Re: 1967 C-10 LS POWERED Build
5 Attachment(s)
Got a few more things done last weekend. Got the seat brackets made and bolted in. got all shocks mounted up. got the new pinion yoke and spicer u joint installed. Got all the gauges wired up and column installed. Heres a few pics..
|
Re: 1967 C-10 LS POWERED Build
1 Attachment(s)
...
|
Re: 1967 C-10 LS POWERED Build
Sweet project.
|
Re: 1967 C-10 LS POWERED Build
I would have waited on the seats until after you put the roll cage in. With the cage installed you could have made tubular mounts instead.
|
Re: 1967 C-10 LS POWERED Build
Quote:
Posted via Mobile Device |
Re: 1967 C-10 LS POWERED Build
GREAT LOOKIN TRUCK!!! I`m in for the ride.
|
Re: 1967 C-10 LS POWERED Build
[Got the cross member plates made for the trailing arms to get the pinion angle correct]
Question here, couldn`t you have used angle shims at the U bolts to correct the pinion angle? lowering the arm mounting point will move your "Instant Center". |
Re: 1967 C-10 LS POWERED Build
Well we went that route, not only correcting the pinion angle, but also lowering the truck. It's just the way I decided to do it.
Posted via Mobile Device |
Re: 1967 C-10 LS POWERED Build
5 Attachment(s)
Been awhile since i've updated. Not much has changed up until the last few months. Finally got most of the interior put together. recovered factory door panels. Got the bed sprayed and put on. I'm going to skin the floor with aluminum and have some aluminum tubs shaped like factory just wider for tires of course. Here's some pics of progress and a mile stone might i add!
|
Re: 1967 C-10 LS POWERED Build
4 Attachment(s)
....
|
All times are GMT -4. The time now is 02:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com