Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Are these still available? Thanks.
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Yes they are!
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
Rob |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
would this bracket work on 1978 C10?
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Payment sent.
Thanks Scott |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Payment on the way
Thanks Rodney |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
Rob |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Will these work in a 68 with an 2007 pedal? Thanks
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
ok rob im gonaa be new to this ls conversion
im getting a 2004 yukon 5.3 set up, including the pedals. how do i know if i need this plate? its going in my 67 short stepper |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Ok then bud. As your former New Mexico parts trader ;-)
What's your price? |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: Gas Pedal Adpater bracket for truck/suv pedal
Hello was wondering if these are still available doing a 5.3 swap out of a 05 in a 72 blazer
|
Re: Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
bump!
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Man. I wish I would have known about these when I did my last swap, I had to do a lot more cutting and hacking then I was happy with doing, this would have made that far far easier. Great product!
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
I will take one. Thanks
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Any option on these for 1965 C10? With a vette pedal
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
I have a 72 c10 swapping in a LS3. Is there a particular pedal that will work best with this? The best place to source that pedal? And price shipped for this bracket?
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
I would use the 2005+ corvette pedal. You can find it on ebay for - $50-$100. The pedal bracket is $50 shipped. Check out this thread it contains all the info for that pedal bracket: http://67-72chevytrucks.com/vboard/s...d.php?t=631165 Thanks! Rob |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
For all of the guys looking for a pedal bracket to work with the 73-87 trucks, here's a thread that has some great info in it:
http://67-72chevytrucks.com/vboard/s...d.php?t=692222 http://www.hotrodlane.cc/Streetstories/81%20swap.pdf Apparently a factory OEM gas pedal from a 94-02 CHEVY GMC 6.5L V8 DIESEL (PN 15984422) will bolt right in. You have to repin a few wires, but it's supposed to be pretty straight forward. The .pdf file has a complete discussion on the entire install, but here is a small snippet: "This is the installed Pedal Position Sensor AKA Drive by Wire pedal. I used one from a 1998 6.5 Diesel truck as it bolts right up and is a closer match than the later Silverado pedal. A couple of the wires do have to be moved as it is internally wired different. Basically, there are three different sensors in the pedal and the PCM compares all three of these to determine how much throttle opening the drivers is requiring. If these three sensors do not agree, a code will be set and the PCM takes a best guess at what the throttle opening should be. The gray wire was moved from location A to J, the Brown wire was moved from location E to A and the Yellow wire was moved from location J to E. I also had to add a slot in the connector plug so it would plug into the pedal." PLEASE NOTE I HAVEN'T TRIED THIS ON A TRUCK, I'M JUST PASSING THE INFORMATION. DO YOUR HOMEWORK BEFORE YOU PURCHASE ANY PARTS!!!! Good luck with your LS Swap!!! |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Ready to buy, you ready to ship? :D
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Do you have any ready to go right now?
Thanks |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Got mine in two days! Well worth the time savings alone!
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Are you able to make one for the 88-99 trucks?
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
http://67-72chevytrucks.com/vboard/s...d.php?t=692222 http://www.hotrodlane.cc/Streetstories/81%20swap.pdf |
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Quote:
|
Re: DBW Gas Pedal Adpater bracket for truck/suv pedal
Payment sent! Thanks!
|
All times are GMT -4. The time now is 04:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com