Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Please let me know what you find. I haven't tackled it yet.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

could you just switch in the High Hump bolt in part and have the clearance you need ?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

thats what I was wondering

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

67Cheby, That looks like an easy cure.. Did the high hump come in a certain year or transmission option? Thanks for the help!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

The easiest ones to find are in manual trans trucks but they also came in 4x4's and those trucks with a T-400.

Until last weekend I had an extra one I would have given you. I just put it into my 67.

They aren't too hard to find and tend to run around $40 to $60 in good shape when I have seen them for sale.

A square body truck piece is a whole lot easier to find and fits pretty close but the back end doesn't match up and the lower corners of the front are mismatched a little. With a little fab work you could make one fit if you have a hard time finding a good 67-72 piece.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

The T-56 is the same length as the 4L60E so the shifter should be within the high hump tunnel area.

The trans in the pic below is a 4L60E.

The worst thing you would need is an offset shifter handle to push the lever forward away from the front of the seat a little.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

70shortfleet, has one for sale on the for sale sec $75 shipped, looks nice too

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

just read your build from back to front, nice to see guys making progress on their projects cant wait to get back to mine. Really like the swap u have picked, modern power in a classic ride. Keep up the good work.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

PERFECT! someone doing the same engine/trans swap as I am... in current day. I watch a couple build threads only to realize they are 5-6 years old. LOL definitely keeping up on this one

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

What's up any progress?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks for asking..
It has been just over a year since I started the build. The wheels and tires are mounted and its finally on the ground. I completed the front end with a new power steering box and tie rod ends.

I have been stripping the doors and hood in preparation for primer. Luckily, the front clip is clean with no rust and very little body work needed. I have been contemplating on switching the front clip for a 67 grill but have decided to stay with the GMC double head light front grill.

http://i806.photobucket.com/albums/y...chassis061.jpg
http://i806.photobucket.com/albums/y...chassis041.jpg
http://i806.photobucket.com/albums/y...chassis060.jpg
http://i806.photobucket.com/albums/y...assis055-1.jpg
http://i806.photobucket.com/albums/y...chassis056.jpg
http://i806.photobucket.com/albums/y...chassis046.jpg
http://i806.photobucket.com/albums/y...chassis045.jpg
http://i806.photobucket.com/albums/y...chassis030.jpg
http://i806.photobucket.com/albums/y...chassis032.jpg

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Looking good!!!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Looking really good man.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Extremely clean build! One note though, I have the same red poly tie rod and link boots on the camaro clip in my 57 and they SQUEEEK like crazy when I turn the wheel!!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Awesome progress!!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Clean....everything looks KILLER !!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Thanks for the input.. I do know choosing to go with the polyurethane has its pro and cons. Hopefully my engine will be louder than the squeak - LOL .

I appreciate all of the compliments! This board keeps me motivated!

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Man, You have kicked tail on this build in only a year. I wish I could keep up with ya. Your sheetmetal looks great. Keep up the hard work.

1 question, how do you plan on painting the cab underside? I am almost to this point and wonder what the best order? I was thinking about painting the bottom firewall and interior before mounting on the frame. Then paint the panels before assembly.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I plan on pulling the cab off the frame and paint it on Jack stands. This worked well when I stripped and primer-ed the cab. I was able to prime it all at once. I also plan on removing the engine and transmission one more time. I am not sure of the condition of the clutch, flywheel and throw-out bearing. Thanks

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Sounds like a plan to me. So have you decided on what kind and color paint yet?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

How do you like the F-body accessory drive? I like how clean it looks over the other OEM options, and I would be interested how it fits

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

nice build

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I like the way you did the rear brake line through the frame. Did you build that?
Posted via Mobile Device

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

^^^ what he said. Also what motor mounts are those and did you have to modify the frame for the motor to set in there???

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I see that you used CPP tubular engine frame mounts but what adaptor plates did you use on the block? Are those Poly motor mounts? Compared to stock location, where does the engine site? Forward, back, higher, lower? How far off the firewall. And last and not least. Howd you squeeze the A/c pump in there? Are you going to have enough room to run the lines? Or are you going to have to do some frame trimming? I am at this point in my build and want to pull the trigger on parts but still dont know what the correct combination of parts are to make it all work. Any and all info is much appreciated. Keep up the awesome work!!!!!!:metal:

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I haven't decided on color. I am using Dupont products.

I thought it looked cleaner than the other options. It was more challenging getting the engine exactly where I wanted it. I did trim less than 1/2" on the inside of the frame rail between the core support and front A-arms to help clear the A/C pump. This should allow me room for the lines and not effect the integrity of the frame.

Adapter plates are also from CPP part#CPLS1-K. comes with the plate, poly mount and hardware. I moved the engine back around 2" from the stock location. This helped with the oil pan clearing the front cross member and filling in the gap between the firewall and the rear of the engine.

I made no modifications to the frame or brake lines except for shortening the rear lines before entering the Wilwood calipers.

Thank You....

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Very nice build, glad to see you chose a color other than black for the frame and suspension. I'm running the same drive train in my 72 SS Nova build and have the same model wheels, except that mine are grey centers. Great minds think alike:lol:. I'm leaning towards powder coating my frame a similar color, maybe the differentials also. Keep the pic's coming, looks great.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Im in on watching this build. Jealous

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Any updates?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

TTT
Posted via Mobile Device

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Anything new?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Nice project! I'm a big fan of the six speed. Looking forward to more updates.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

I took a break for a bit, but I am back on the body work in preparation for paint. After spending many hours on the fenders and hood I decided to scrap the GMC and go with the 67 Chevy front clip. I finally got my 9 yrs old son away from his PS3 and helping with the sand blasting. He is doing a great job... I will be media blasting the bed this weekend and will update with pictures. Still haven't decided on a color. The two hardest parts of the build for me have been wheel/tires and paint choice.

http://i806.photobucket.com/albums/y...v/IMG_3265.jpg
http://i806.photobucket.com/albums/y...v/IMG_3286.jpg
http://i806.photobucket.com/albums/y...v/IMG_3263.jpg
http://i806.photobucket.com/albums/y...v/IMG_3259.jpg
http://i806.photobucket.com/albums/y...v/IMG_3287.jpg

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

What size is that shop?

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Nice progress
Posted via Mobile Device

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Awesome, updates. Keep up the good work.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Looks like you are doing a good job training your boy. Start them out early in the garage. Keep gathering the parts, it looks like you have it all there. I hear you on the wheels and paint, I have a plan for my paint, gonna wait till the last minute on the wheels.

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

Choosing wheels, tires and paint color plagues us all. Have you picked a color yet?
Posted via Mobile Device

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

nothing like fresh parts

Re: Started my first frame off - 72 SWB LS1, 6-spd manual
 

:agree: Nice new and fresh original parts will make for a clean build!