Re: 90 burb (( daily dragger))
any updates? wife's ride, or yours?
|
Re: 90 burb (( daily dragger))
nothing lately pasted on buying the burb rusted bad all round
hoping to rework rear end measure for tank/cell replacement having to move parking brake bracket and what ever will keep it laying on frame |
Re: 90 burb (( daily dragger))
building my 2 link kit right now will lay frame in rear.
now debating on the front thinking 2" z and 2" sectioned crossmember I need about4-5" to lay on pinch welds. frame is about 2" below body what to do next?? |
Re: 90 burb (( daily dragger))
body drop....
|
Re: 90 burb (( daily dragger))
no need for a body drop if I redo the frame with 2x4 stock I can cut off the pinch welds and lay body
major set back I ripped out all the tub and notch work to start over guy f'd it up tubs are set back 4 inches from center,bridge cover was 6" above frame notch,tubs are 8" wider than needed debating a 3 link with a wish bone now then build back around it want to reuse my 3rd row seat so we can all cruise around in it? |
Re: 90 burb (( daily dragger))
http://i37.photobucket.com/albums/e9...4rnr/burb2.jpg
still around just stripped the 84 burb I bought for parts http://i37.photobucket.com/albums/e9...4rnr/burb1.jpg going to section crossmember this month and install early july still reworking the rear setup thinking bag on bar 4 link |
Re: 90 burb (( daily dragger))
just to let you know bro, 2in on the crossmember the a-arms will hit the steering stuff. I went 1 5/8 and it was just touching, so I think you should do a 1 5/8 and then 2.5 z...just my 2 cents...
|
Re: 90 burb (( daily dragger))
one question where is the interference at can I just clearance the end of the lca's or is the steering going to drag on the crossmember
|
Re: 90 burb (( daily dragger))
Yea it is the steering that hits, I will take some pics sat because I will be under there
|
Re: 90 burb (( daily dragger))
Chris,
When are we going to link up and shoot the s&*t? |
Re: 90 burb (( daily dragger))
I'll be around the house all weekend but next weekend I'll be gone for a week to Pa
|
Re: 90 burb (( daily dragger))
http://i37.photobucket.com/albums/e9..._7620688_s.jpg
cleaned out garage and insulated it http://i37.photobucket.com/albums/e9...8_278504_s.jpg stuffed burb in garage pulling it apart this week order part this weekend shortened my honey dew list so had some time for my toys :lol: |
Re: 90 burb (( daily dragger))
http://i37.photobucket.com/albums/e9...r/4linkkit.jpg
this showed up today front crossmember is at the LA drop shop 2"section with steering clearance built in SD trany mount is in exhaust removed burb headed to La drop shop next friday to install 4 link, shaved cowl and sectioned crossmember refinish floor:waah: |
Re: 90 burb (( daily dragger))
cool, glad to see progress! Can't wait to see the finished pics of the floor and suspension :metal:
|
Re: 90 burb (( daily dragger))
http://i37.photobucket.com/albums/e9...rnr/secmem.jpg
painted up this week http://i37.photobucket.com/albums/e9...r/assembly.jpg assembled installed in truck should be done on tues after work swapping to rack-n-pinion steering for clearence issues |
Re: 90 burb (( daily dragger))
need bigger pics bro!!!
|
Re: 90 burb (( daily dragger))
I down loaded them small on phtobucket and seem to get them any bigger
not a tech geek LOL |
Re: 90 burb (( daily dragger))
looking good i have the same problem with photo bucket
|
Re: 90 burb (( daily dragger))
You must be grabbing the wrong code, looks like you are grabbing the thumb nail code
Posted via Mobile Device |
Re: 90 burb (( daily dragger))
I just tried all 4 options 2 are photos that size one is a link and one is just five lines of characters
|
Re: 90 burb (( daily dragger))
crossmember is in swapping in a mustang rack
hope to start the 4 linkend of month |
Re: 90 burb (( daily dragger))
Make sure to take pics of the rack install if possible. I am interested to see how you are going to mount it.
|
Re: 90 burb (( daily dragger))
will do going to order rack stuff after freakshow next weekend so my be a few weeks till that gets started
|
Re: 90 burb (( daily dragger))
If you want, email me the pics and I'll post them for ya. I PM'd ya my email address earlier tonight. If you have others I can post those for ya too.
|
Re: 90 burb (( daily dragger))
Any updates?
|
Re: 90 burb (( daily dragger))
just had the 4 link done shop is boxing the the rear frame waiting on lower bar changed them to 2x2 , next having the front frame notched for steering decided to keep stock steering just moving it to work thinking about frame mods change it out for 2x4 and cut off pinch welds
|
Re: 90 burb (( daily dragger))
1 Attachment(s)
waiting on parts
|
Re: 90 burb (( daily dragger))
Is it me or do the pics in this thread keep getting smaller? lol
|
Re: 90 burb (( daily dragger))
subcribing for bigger pics!
|
Re: 90 burb (( daily dragger))
http://i37.photobucket.com/albums/e9...r/7993dcba.jpg
back half all painted up(bars are powder coated with purple flakes http://i37.photobucket.com/albums/e9...r/0343a15b.jpg carrier mount was trimmed so frame lays flat on ground burb got put aside for awhile but back at it again just order a porterbuilt filler panel for firewall and waiting on a reply about a drop member front end |
Re: 90 burb (( daily dragger))
nice truck
|
Re: 90 burb (( daily dragger))
Nice bro!
Posted via Mobile Device |
Re: 90 burb (( daily dragger))
bump not much progress haven't really done anything to it since 2011
messed with a few mini's and other peoples projects |
Re: 90 burb (( daily dragger))
I know this is an old thread but I have to ask.... Any more progress???
|
Re: 90 burb (( daily dragger))
Quote:
Me too; any more progress? I just found this thread and read through the entire thing. Working on a '84 burb here. |
All times are GMT -4. The time now is 12:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com