Re: How much would you spend
 

Well guys I figured the pump I bought was no good right out at of the box so got a new one and pump Push rod tried starting it and still nothing so ran a hose to a bottle of gas and tried again and it worked so I took the sending unit out and it was clogged and shot so I unclogged it and put it back I together to drive on to a drive it on a trailer to my house so I'm going to its a sending unit from lmc

http://i306.photobucket.com/albums/n...psdugcfryl.jpg
Also my ford buddy had a great day towing a chevy and I laugh to because I'm a ford guy to :) lol !!!
http://i306.photobucket.com/albums/n...psxswnhmlt.jpg

http://i306.photobucket.com/albums/n...psd0r3gotx.jpg

Re: How much would you spend
 

Well guys I figured the pump I bought was no good right out at of the box so got a new one and pump Push rod tried starting it and still nothing so ran a hose to a bottle of gas and tried again and it worked so I took the sending unit out and it was clogged and shot so I unclogged it and put it back I together to drive on to a drive it on a trailer to my house so I'm going to its a sending unit from lmc

http://i306.photobucket.com/albums/n...psdugcfryl.jpg
Also my ford buddy had a great day towing a chevy and I laugh to because I'm a ford guy to :) lol !!!
http://i306.photobucket.com/albums/n...psxswnhmlt.jpg

http://i306.photobucket.com/albums/n...psd0r3gotx.jpg

Re: How much would you spend
 

FYI, you can get higher quality parts if you look to companies other than LMC. Not sure about sending units but other things the quality is noticeably better from the other vendors.

Re: How much would you spend
 

Thanks what are some of the other venders ? But autozone and advance didn't have the sending unit lol

Re: How much would you spend
 

I think your dealing with a rusty tank problem, i'd remove it and try and clean it out a bit and use a flash light to look inside to see how much rust is in it, if its a lot then i'd replace it, my sock was off white color and it was the original sending unit.

Re: How much would you spend
 

Agreed. If the sending unit is that rusty then the inside of the tank is just as bad.

Replace the tank if you have the money. If not, carry an extra fuel filter with you. Also add a filter before the pump.

Re: How much would you spend
 

I don't have the money right now I'm goin to replace the sending unit and I have a inline filter already under the truck and there's one in the carb

Re: How much would you spend
 

Ok guys today I did half a tune up I changed the plugs, coil, PVC valve , bought valve cover gaskets for tomarrow rubber ones felpro , and sprayed the motor down with degreaser and washed it off with water, bagged the carb,dizzy, and altnator so no water got on those
How does the plugs look to you guys
http://i306.photobucket.com/albums/n...pssvsqvs38.jpg

Re: How much would you spend
 

man its good to hear that you got it running , and now you can have some fun with it...

Re: How much would you spend
 

The plugs look like it is running a little rich - but not too bad. No oil is good.

Re: How much would you spend
 

I'm glad to have it at my house and glad I got here running for the second time lol but the sending unit,float and gas cap will be here Friday

Re: How much would you spend
 

That's what I was thinking too, you want a nice cardboard color right ?

Re: How much would you spend
 

Ok guys I'm goin to a junk yard in pa Harry's u pull it very cheap compared here in ct so I was wonder what parts do I need to swap to discs all around and stay 8 lug ? What year trucks am I looking for ,last time I got a 5 lug swap for my mustang it cost me 80 bucks for everything. Spindles, axle shafts calibers,brackets master cylinder. So if I can find a donor truck I'm getting the swap, I think I need spindles lower ball joints calibers for the front and as for the rear I have no idea:) and also a master cylinder and proportion valve

Re: How much would you spend
 

http://www.wegotused.com/?page_id=13...anyName=harrys if anybody is close to pa check out there price list, it's worth a trip I live 3 hrs away and I'm goin Saturday

Re: How much would you spend
 

Got some new parts today wish it told me It came with a float so now I have a extra if any one needs it let me know http://i306.photobucket.com/albums/n...psmt0x1jfu.jpg