Re: Parting out a 69 longbed truck
 

I do but the levers are broken.

Re: Parting out a 69 longbed truck
 

I never heard back from you???

Re: Parting out a 69 longbed truck
 

Looking for a rear shock cross member for 2wd shipped to 98223. Thanks

Re: Parting out a 69 longbed truck
 

Ok I'll pass on the heater control, thanks for your time.

Re: Parting out a 69 longbed truck
 

Did I see a air cleaner assembly without a dashpot? Post #10 If so may I see pics, please. Bruce

Re: Parting out a 69 longbed truck
 

Arrived in perfect shape! Thanks to your master bubble wrap job. thanks again

We can both thank my wife for the bubble wrap job! Glad it made it ok. I was nervous shipping glass.
Posted via Mobile Device

Re: Parting out a 69 longbed truck
 

I know you are either on your way back from or just getting back from the Power Tour (completely jealous here) but I know that you had a couple of complete cabs for sale earlier in the thread and I wanted to see of you still had any of them. I have recently decided that replacing mine is the way to go.

Thanks,

Re: Parting out a 69 longbed truck
 

Ill take the wiper arms and linkage, can I get the nut that bolts linkage to the wiper motor.

Do you have more original wiper arms and blades

Re: Parting out a 69 longbed truck
 

Is the center link still available?

Re: Parting out a 69 longbed truck
 

I haven't read everything but here go's, do you have a radio & a heater control panel w/ good levers, shipped to 92284, thanks, mjgord51

Re: Parting out a 69 longbed truck
 

I haven't read everything but here go's, do you have a radio & a heater control panel w/ good levers, shipped to 92284, thanks, mjgord51

Re: Parting out a 69 longbed truck
 

Not at this time. I do have another truck I am trying to sell complete. If I can't get the money I need out of it I will be parting it out and I will have those parts.

Re: Parting out a 69 longbed truck
 

Do you mean the panned bar?

Re: Parting out a 69 longbed truck
 

Sorry I haven't been on here in quite awhile. Do you still. Need the wiper parts?

Re: Parting out a 69 longbed truck
 

I do not at this time but might part a truck I am trying to sell complete. I will know in about a month

Re: Parting out a 69 longbed truck
 

Yes I have one. I see you are asking about one in another post so just let me know

Re: Parting out a 69 longbed truck
 

Do you have any dark green defroster vent's that are not cracked/broken?

Re: Parting out a 69 longbed truck
 

Do you mirrors in there some where? I can pick up local

Re: Parting out a 69 longbed truck
 

Thanks. If you do decide to part it out, please put me in line for the bare cab.

Matt

Re: Parting out a 69 longbed truck
 

What type of mirrors are you looking for?

Re: Parting out a 69 longbed truck
 

Just to be clear this cab is not perfect by any means. It will have rust in the usual places. How bad is your cab? I am getting closer to parting it out as I have now had 3 weekends in a row of no show people that are hot all week then disappear on the day they promise to arrive.

Re: Parting out a 69 longbed truck
 

Here is a link to what mine looks like. I have been asking around on the board and everyone says to replace. Not looking for perfect, just better than what I have and not breaking the bank to fix or replace it.

http://67-72chevytrucks.com/vboard/s...d.php?t=673764

Thanks,

Matt

Re: Parting out a 69 longbed truck
 

PM me when you make that decision, I'll be on the side line. Marvin

Re: Parting out a 69 longbed truck
 

Any at the moment I can't find any at a good price shipped to 75023

Re: Parting out a 69 longbed truck
 

Sorry but I am not parting out a 69 longbed truck and have never been. I enquired about a stock radio antenna,but that is all.



Thanks
jim ellis

Re: Parting out a 69 longbed truck
 

I have some large truck mirrors on the truck I am going to part out for 60 bucks and a set on new in the box aftermarket mirrors for 100.

Re: Parting out a 69 longbed truck
 

Not sure why you put this on my thread?

Re: Parting out a 69 longbed truck
 

Ok I will. Thanks

Re: Parting out a 69 longbed truck
 

It is looking more and more like I will be parting out the other truck. You can come see it on the 4th of July if you like to know if it is better than yours.

Re: Parting out a 69 longbed truck
 

PM Sent

Re: Parting out a 69 longbed truck
 

I'm looking for all the linkage for 3 on tree if you have it.

Re: Parting out a 69 longbed truck
 

I do have those. 65 plus shipping for the 2 rods with the special adjusting nuts on the ends. Is there any other pieces you need?

Actually I bumped my head for a second. I don't need the linkage for the shifting. I need everything for the clutch linkage besides the pedal and fork. My shifter has been relocated to the floor. Sorry for the confusion.
Posted via Mobile Device

Re: Parting out a 69 longbed truck
 

Ok I have those as well. The pivot bracket, the clutch rod that goes to the pedal assembly, the rod that goes to the clutch fork, and the angle shaped pivot that goes on the clutch rod at the fork. 75 plus shipping for those. Do you need the clutch fork and the throw out bearing?

Re: Parting out a 69 longbed truck
 

Also you will need the pivot ball that attaches to the engine. I know I have one for a v8 but will need to remove one if yours is an inline 6

Re: Parting out a 69 longbed truck
 

do you still happen to have these mirrors?

Re: Parting out a 69 longbed truck
 

Sorry, I sold them all

Re: Parting out a 69 longbed truck
 

Do you have brake booster linkage? If so how much to 75214?

Thanks,

http://i1332.photobucket.com/albums/...ps86d85dbe.jpg

Re: Parting out a 69 longbed truck
 

Any chance you'd have a windshield wiper motor mount in good shape?

It'd look like this guy here:
http://67-72chevytrucks.com/vboard/s...8&postcount=73