Re: My 52 GMC Build
Quote:
Quote:
|
Re: My 52 GMC Build
Craigerr is stuck doing yard work in the heat and humidity the next two days...
|
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
Thanks joedoh It's still working ok I just won't take it on any trips pulling the trailer. It's only another 2 weeks but I will ask my trany guy about that stuff.
|
Re: My 52 GMC Build
2 Attachment(s)
I was sent 2 more pictures of when my GMC was a fire truck. They are still looking.
Attachment 1551799 Attachment 1551800 |
Re: My 52 GMC Build
Hi Bob, thanks for the invite to your BBQ last weekend. The food was GREAT, and Gayle and I enjoyed meeting your family and friends. Good time! :metal:
|
Re: My 52 GMC Build
No problem at all John glad you and Gayle came. We counted 41 ppl for dinner.
|
Re: My 52 GMC Build
The old pictures are so cool. It is nice they are finding them for you.
|
Re: My 52 GMC Build
awesome pics, you are a lucky man having those.
|
Re: My 52 GMC Build
It's great they are willing to look for the pictures out of the goodness of there heart.
|
Re: My 52 GMC Build
IMO it would be awesome if that Pumper #1 was on your door...
Those pics are awesome! |
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
2 Attachment(s)
So I finally got to something that has needed to be done. Flush my coolant. I guess a motor that sits builds up some surface rust inside. To my best efforts of flushing before I hooked up the rad. The coolant still went rusty, I guess driving shook it all loose and when it got hot when the fan stopped working. So warm up motor, drain, fill with hose water warm up again. Drain, fill with distilled water, warm up, drain, fill with long life diesel coolant.
Oh the coolant in the tray started green. Attachment 1553985 Attachment 1553986 |
Re: My 52 GMC Build
2 Attachment(s)
Today I made a hood latch to rad cover. I have been thinking the way the truck has been running some of the the air is going over the top of the rad in the 1.5" gap. Now that I have taken it out on a run I was right. Stays noticeably cooler on the gauge at cruising speed. I used three holes that where already there and some 1 1/4 X 1/8" angle with some 1/8" rubber I had. I also finally painted my hood latch.
Attachment 1554192 Attachment 1554193 |
Re: My 52 GMC Build
nice clean fix! I picked up some kydex today to make some air diverters, what a co-inky-dink!
|
Re: My 52 GMC Build
1 Attachment(s)
Hi all! So Saturday was crazy hot and humid here but the truck ran great. I had a photo shoot to go to about 20 min from home with Dave from "Stance is everything" He picked the location and told me where to put the truck. It was cool to see what angles and positions he chose. I'll post link when I get it.
Attachment 1555795 |
Re: My 52 GMC Build
awesome can't wait to see the article from stance is everything
|
Re: My 52 GMC Build
Nice fix on the air gap!
Love your "teaser" pic, looking forward to the rest of them! |
Re: My 52 GMC Build
Bob, I can't wait to see the pics. I recognized the location immediately. I lived in the "Hespeler" part of Cambridge for a few years, not far from that old furniture factory.
|
Re: My 52 GMC Build
Quote:
Quote:
Quote:
|
Re: My 52 GMC Build
Wow! I can't believe I hang out with a guy who use to live in Hespeler....:uhmk:
|
Re: My 52 GMC Build
3 Attachment(s)
So then Sunday morning at 9:00 Joe came over and we put my truck on my neighbors drive on hoist and pulled the transmission. Hardest part was getting it on the ramps right so it could sit on the scraper bars aired out. We blocked up the motor and had it out in 2hrs just the way I had planed it to come out. :metal: It got dropped off at the trany shop this morning and I should get it back end of the week.
Attachment 1555826 Attachment 1555828 Attachment 1555829 |
Re: My 52 GMC Build
Very nice on the shoot! That's good to hear the trans removal went great. That's definitely an early E40D with only 4 torque converter mounting studs.
|
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
2 Attachment(s)
Stopped in at the transmission shop last night. All the major hard parts "pump, gears" are good soft parts "clutches" are burnt. He said the forward clutch which runs reverse and 3rd gear had a lot of play. He is adding another clutch disk to the forward clutch and doing a few other mods to help it hold more power. All sounds good to me. You can see on the clutch disk it is black instead of brown.
Attachment 1555995 Attachment 1555996 |
All times are GMT -4. The time now is 09:57 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com