![]() |
Re: My Dusty 71 GMCe Electruck
Lookin' good!
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
I will fax a six pack of beer to anyone who can find me the following bolts
7/16"-14 full thread (no shoulder) 1 3/4" long hex head zinc plated Grade 5 I need two, not 50, and I would love to get them this week not next month, ha ha |
Re: My Dusty 71 GMCe Electruck
You're in luck, these high-quality, medium strength fasteners from McMaster-Carr come in Grade 5, 7/16-14 fully threaded, 1 3/4" length, zinc plated, hex-head, and 2 ea.
But wait, there's more! Order now and we'll include an extra 3 bolts! (just pay an additional $5.02 ea) Plus, as a bonus we'll throw in an extra 1/4" in length on each bolt for free! (just trim to achieve the desired length) 2" Fully Threaded __ Coarse ASME B18.2.1, SAE J429 5 92865A675 $5.02 Medium-Strength Grade 5 Steel Hex Head Screw, Zinc-Plated, 7/16"-14 Thread Size, 2" Long, Fully Threaded Packs of 5 |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
what if ? could I ? would it ?
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
Our Mission: Connect the black BMW "Safety Box" to the Lexus Inverter
... using the stock OEM connectors as much as possible turns out the BMW connection from it's Safety Box to the orange external plug on the OEM battery box is very modular and I luv that |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
so this is the empty OEM BMW battery box that's what my batteries came out of, and that's where the orange connector is from
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
time to transferize that hole to the alumininium plate
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
nothin' to it but to do it
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
let's see if she'll fit
|
Re: My Dusty 71 GMCe Electruck
You're so smart! Good job.
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
drilling these four blind holes to secure it with them OEM screws was a bit tricky
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
So everything below this plate is always live and lethal, 351 volts just waiting to make it a bad hair day, anything above this plate is only live and lethal when we turn on the truck to drive it or are charging the battery
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
that black box is arguably the most important component in this entire operation, I say arguably because some would say without the aftermarket open source VCU (Vehicle Control Unit) you can't drive the car, but in terms of safety without that black Safety Box your truck goes BOOM! and makes black smoke
|
Re: My Dusty 71 GMCe Electruck
Why am I up so early, it's 7:30 am here. Why are you up so early?
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
Top Tip: always try and buy as much OEM stuff as you can, ask for pig tails, ask for cables, as you wheel and deal, and the seller is firm on the price, say something like: "that sounds good, but will you throw in the cables?" and 86.54% of the time they might
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
Ahhh! You know, "it ain't a lie if you believe it your own self!"
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
these fat long orange cables will get cut to size, we may just need like 18"
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
Not bad for government work !
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
so got the Battery Tray Lid DC-DC Converter Holder (or BTLDCDCCH for short) in the good ol' organic free range BTLDCDCCH vice and decided to make things a bit sexy
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
those eagle eyed amongst you may notice the front two 7/16" studs are missing their acorn nuts, well, the struggle is real, take a look below at what my local ACE Hardware store carries (or should I say does NOT carry), they seriously jump from 3/8" to 1/2" you can't make this stuff up folks:
|
Re: My Dusty 71 GMCe Electruck
I love spending half my Saturday driving around looking for stuff
|
Re: My Dusty 71 GMCe Electruck
Please tell me they are charging by the pound and not by the piece.:waah:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
Let's see where we can shove these?
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
six holes each and Home Depot still got em wrong, so I had to moke some modifications, I can't stand aftermarket EV conversion parts
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
a little trial fit
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
the angle triangle is just a prop
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
time to poke some holes
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
that's not too shabby
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
[slow] progress not perfection
|
Re: My Dusty 71 GMCe Electruck
Amen brother!
|
Re: My Dusty 71 GMCe Electruck
X3
|
Re: My Dusty 71 GMCe Electruck
Slow and steady wins
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
in keeping up with the current social media trends I now break my silence on the water pump installation
one or two of the many part numbers PN: 6008047-00-E, 1035348-00-G What will this pump cool?
FYI the Chevy Volt DC DC Converter (aka alternator) is air cooled and does not require the water pump action |
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
so I call this the Tesla Model S water pump but I think someone else makes it for them and the only thing that makes it Tesla is this neat rubber bracket
|
All times are GMT -4. The time now is 02:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com