The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today.The 3rd chapter (https://67-72chevytrucks.com/vboard/showthread.php?t=773345)

Andy4639 01-18-2020 11:52 PM

Re: What did you do to your truck today.The 3rd chapter
 
Yesterday!:metal:


https://www.youtube.com/watch?v=TviYONUW5Ag


Already Gone 01-18-2020 11:58 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by allchevy58 (Post 8661990)
Brand new original style, new dryer and refilled with R134.

Thanks. where dd you buy the compressor ?

71CHEVYSHORTBED402 01-19-2020 01:13 AM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
We drilled for moldings today. It went well. The mock-up is about there, a few simple things to do yet. I'm looking forward to tearing it down for paint. We'll have the body rebuilt December or sooner. It's almost close;)

zicc1835 01-19-2020 04:32 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by KMC3420 (Post 8662006)
Finished my rear axle brake lines, small steps.

nice work..... im assuming your bending you own lines

Andy4639 01-19-2020 07:34 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
I brought the 68 home today from my buddies shop on the ramp truck. I got the front end almost all back together.:chevy:

KMC3420 01-19-2020 07:39 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Quote:

Originally Posted by zicc1835 (Post 8662401)
nice work..... im assuming your bending you own lines

Thanks! Yes, bending my own. It’s the NiCopp line and bends/flares amazingly easy. Using it makes me wonder why people use SS? I wrapped my lines in SS spring rock guard from inline tube and it gives the NiCopp a decent amount of rigidity. My previous experience bending SS was not so pleasant.

KMC3420 01-19-2020 07:54 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Andy4639 (Post 8662022)

Nice! Sounds good.

zicc1835 01-19-2020 10:28 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by KMC3420 (Post 8662482)
Thanks! Yes, bending my own. It’s the NiCopp line and bends/flares amazingly easy. Using it makes me wonder why people use SS? I wrapped my lines in SS spring rock guard from inline tube and it gives the NiCopp a decent amount of rigidity. My previous experience bending SS was not so pleasant.

really looks super thanks for sharing ill try that on my next build if i can ever get through with this one :waah:

KMC3420 01-19-2020 10:34 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by zicc1835 (Post 8662618)
really looks super thanks for sharing ill try that on my next build if i can ever get through with this one :waah:

Haha! We are all in the same boat, plugging away. On occasion we see a few guys who are able to move along at a more rapid pace. I have found slowly moving along allows for better planning. You will get there, we all will. Slowly.

Andy4639 01-19-2020 10:42 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by KMC3420 (Post 8662492)
Nice! Sounds good.


Thanks.
:chevy:

allchevy58 01-19-2020 11:29 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Already Gone (Post 8662024)
Thanks. where dd you buy the compressor ?

I had a shop in town do it. They probably got it from a local supply shop called Ranshu Parts Company. Alma Products 51-86262a is the brand, they have new and they reman them too.

Already Gone 01-21-2020 07:02 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
What i did was go to my storage garage and do my mid Winter stare my truck and make sure she looks as good as when I parked her inside in October. Then came home and ordered my new steering wheel to replace the LeCarra one that is on the truck which I had on my pink /white truck as well. Got that LeCarra in 2006 so time for a change. I had my mind made up to get this one and the when the new original style 15 inch one came out I thought I might like that better but decided to stick with original plan.

70STOVEBOLT 01-21-2020 08:59 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Already Gone (Post 8663658)
What i did was go to my storage garage and do my mid Winter stare my truck and make sure she looks as good as when I parked her inside in October. Then came home and ordered my new steering wheel to replace the LeCarra one that is on the truck which I had on my pink /white truck as well. Got that LeCarra in 2006 so time for a change. I had my mind made up to get this one and the when the new original style 15 inch one came out I thought I might like that better but decided to stick with original plan.

IMHO you made the right decision

SoCoC10 01-22-2020 09:32 AM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Installed the Truck World upholstered seat. In the homestretch now.

Smitty 01-22-2020 11:54 AM

Re: What did you do to your truck today.The 3rd chapter
 
Redhead steering box and Draglink! “Oh! What a difference it made!”

maverickmk 01-25-2020 04:42 PM

Re: What did you do to your truck today.The 3rd chapter
 
Did a lot of little things, but the biggest one was I installed an HEI distributor.
Way too nice for my turd, but it runs like a champ :D

https://i.imgur.com/vgknlOO.jpg

Steeveedee 01-25-2020 08:37 PM

Re: What did you do to your truck today.The 3rd chapter
 
Drove it to get a bunch of wood and iron to replace a couple of old crumbling gates.

SRU1436 01-26-2020 09:08 PM

Re: What did you do to your truck today.The 3rd chapter
 
Working on reupholstering the bench and putting in new carpet. Photos won’t load, getting a security token issue.

SRU1436 01-26-2020 09:11 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
Finally got it to work, found the build sheet under the carpet. And a portion of one behind the seat.

davischevy 01-26-2020 10:32 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by KMC3420 (Post 8662006)
Finished my rear axle brake lines, small steps.

I'd like to look at your project sometime.

KMC3420 01-26-2020 11:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by davischevy (Post 8666849)
I'd like to look at your project sometime.

Same with yours! It’s always nice to get some motivation in person. Right now I am close to a roller. I have been keeping up with your latest build. It’s coming along plenty fast. Once I get a little further along and get my truck all in one place I will let you know.

Lee H 01-27-2020 09:49 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by SRU1436 (Post 8666784)
Finally got it to work, found the build sheet under the carpet. And a portion of one behind the seat.

Mine was under the carpet also and a Fremont truck.

SoCoC10 01-29-2020 09:41 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Tachometer Cluster Restoration completed.

Steeveedee 01-29-2020 10:39 PM

Re: What did you do to your truck today.The 3rd chapter
 
Nice! I want to do this to my IP one of these days.

67C10Step 01-31-2020 11:11 PM

Re: What did you do to your truck today.The 3rd chapter
 
Rear brakes done including new parking brake cables so no more wheel chocking. Parking brake works even if the rest do not yet.

All I have left on the rear is new brake lines and bump stops.

Anyone know where you can get bump stops for lowered trucks? I saw them online once and now I can’t seem to find or remember where.


All times are GMT -4. The time now is 10:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com