Re: What did you do to your truck today part III
You been VERY busy Rian!
|
Re: What did you do to your truck today part III
2 Attachment(s)
Well with El Nino coming thought it best I deal with my drip rail. It'll take a while for the new paint to fade in but otherwise came out pretty good.
|
Re: What did you do to your truck today part III
2 Attachment(s)
Made a little progress on my motor...
|
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
Quote:
One cartridge kit was enough but I was stressed the whole time thinking I was going to run out. Ended up with about 1/5th left. Hardest part was trying to do the whole thing in one continuous run. You really need to do a dry run first figuring out how you are going to reach everything. Also the two downward slopes at the rear are a little tricky as the stuff flows quite a bit and I ended up with more at the bottom than anywhere else so plan for that. All and all a pretty easy product to work with. |
Re: What did you do to your truck today part III
Quote:
Just a bit. Problem is, the way I had the cab stood up, I could not get it back in the garage, and the chassis and floor needed to be finished before I head for Clem's parrty. The rest of this week has rain forecast, and once I get my new cab mount rubber set and fit it, the cab will be bolted in place. So it all had to be done. Just waiting for Martin now to give me a hand rolling it forward again, safely, and replacing the bed, then pack away and have a long hot bath. |
Re: What did you do to your truck today part III
Woke at Stupid-O-Clock and had a mug of tea.
Very happy with the outcome so far. All the cleaning and preparation paying off, it does take up the majority of the time but if you do, the result will not come back later to bite you in the bum. Floor was seam sealed inside and outside on joins and all welds. Underseal brushed on, I have also got spray on Schultz underseal but prefer. Getting into corners and around the back of folds. http://i294.photobucket.com/albums/m...ps6wlli80r.jpg Altogether now....... http://i294.photobucket.com/albums/m...ps95rz9y8b.jpg At about 5.30 Martin popped over to help me get the cab down and move the bed into the back of the garage. He seemed happy with the progress and result, he has a super critical eye. So this is where my weekend ended, during the week I will paint the inner floor as I had done a second coat of seam sealer as well. http://i294.photobucket.com/albums/m...pspmefettg.jpg Tired tonight, but happy. |
Re: What did you do to your truck today part III
Mocked up my small block and 2004R transmission. I have more room with that trans than with the TH350 (small hump cab) Go figure. Using the POL engine brackets and trans cross member from western chassis.
http://i.ebayimg.com/00/s/Mzc1WDUwMA...UncCW/$_12.JPG http://i.ebayimg.com/00/s/MzA1WDUwMA...SvIFB/$_12.JPG |
Re: What did you do to your truck today part III
Cruising the Coast started today, so it's 8 days of classic rides. Started out cloudy and cool but got nice after lunch. Supposed to be mid60s to low 80s and clear all week. here is a sample of the 1400 shots I took today.
https://picasaweb.google.com/1060546...eat=directlink |
Re: What did you do to your truck today part III
Put a Summit 1103 cam along with new lifters and double roller timing set in the beater.
|
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
1 Attachment(s)
Front Clip coming together.
|
Re: What did you do to your truck today part III
1 Attachment(s)
Mounted the hood!!!!
|
Re: What did you do to your truck today part III
2 Attachment(s)
Installed me new mirrors on Crustine. Old ones tended to sit where ever they wanted to. lol
|
Re: What did you do to your truck today part III
2 Attachment(s)
I changed my white shocks with black ones.. :lol: It seems I had gas shocks in the truck but the left one went down but didn't rebound back. Maybe there won't be a lot of bouncing up and down anymore. :sumo:
|
Re: What did you do to your truck today part III
It's amazing how much work you can squeeze into an hour when you,know your wife will be home soon and you spent the last two days in the garage.....
So tonight I pulled the truck out after work and "quickly" painted the floor, then cooked dinner..... Fried pork chops, butter and herb mushrooms and cous cous. Perfect. First coat down, next coat in a few days, the sound deadening, felt pads and carpet once the paint is done. http://i294.photobucket.com/albums/m...psc0z94lli.jpg Nothing else to do right now except start cleaning up the rear suspension, chassis and various other bits like brakes etc. |
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
1 Attachment(s)
Quote:
truck looks great too!! Stuffed my Driver's Door with glass and mechanicals - visor and peep were just begging me so why not... |
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
Nice looking plug wire setup, What brand are they and where to buy them? Where did you get the wire loom kit from? That is what I want to do to my engine.
|
Re: What did you do to your truck today part III
Ok, so if there was a breathalyser on my keyboard i might be in trouble with the feds but as there is not I can post with impunity!
So why the celebration? 2 reasons.. got my first 'big' deal locked in at my new job but, more importantly, my registration documents arrived today so Woody is now 100% legal! Better slow down now the Man knows who i am.... P.:D |
Re: What did you do to your truck today part III
Got my first coat of POR 15 on my chassis after work this evening .
http://i56.photobucket.com/albums/g1...pszdh3gprr.jpg |
Re: What did you do to your truck today part III
1 Attachment(s)
spent monies...
|
Re: What did you do to your truck today part III
Quote:
Plug wires are straight boot pertronix wires from summit. wire looms are R&M also from summit. clip on wire markers from summit. The wire loom holder bracket that mounts to the rear of the head was made by me and the actual wire holder came from ebay super cheap. i'm pretty happy with how everything is coming together but it looks like my motor won't crank for some time as i'm working on the wife's 57 for the time being. |
Re: What did you do to your truck today part III
Got the a arms and one spindle blasted before the rain hit. All painted now but to wet to touch for pics. Got a few bare metal pics though.lolhttp://i192.photobucket.com/albums/z...pss2srur6o.jpghttp://i192.photobucket.com/albums/z...pshcxjr2wx.jpghttp://i192.photobucket.com/albums/z...psaltwdjfi.jpghttp://i192.photobucket.com/albums/z...psljoho85x.jpghttp://i192.photobucket.com/albums/z...psu1vsi0z8.jpg
|
Re: What did you do to your truck today part III
All painted up. Got 1 splndle,torsion bars to clean and I can start putting back together. Left the grease on the spindle to keep paint off. A good wipe and like new.
http://i192.photobucket.com/albums/z...psycso2noc.jpghttp://i192.photobucket.com/albums/z...psyiqjbwqx.jpghttp://i192.photobucket.com/albums/z...psfnn3aggo.jpghttp://i192.photobucket.com/albums/z...psdpdybsph.jpghttp://i192.photobucket.com/albums/z...psimqlgayz.jpg |
Re: What did you do to your truck today part III
Painted the tank.
http://i294.photobucket.com/albums/m...psr22aftib.jpg Scraped, cleaned and petrol washed all of rear end farm cab backwards. http://i294.photobucket.com/albums/m...ps0a5tdbz4.jpg |
Re: What did you do to your truck today part III
3 Attachment(s)
We got the rear part of my frame sand blasted and painted with POR15. Also got my dads 3/4 ton frame painted, we sand blasted his frame last weekend.
|
Re: What did you do to your truck today part III
1 Attachment(s)
I cleaned it up a bit. was to darn dirty. That is what happens when you drive them. :metal:
|
1 Attachment(s)
FINALLY got. My bed together and mounted! A long to short conversion alone with rust repair has probably taken me 30+ hours of work!
Posted via Mobile Device |
1 Attachment(s)
Posted via Mobile Device
|
Re: What did you do to your truck today part III
Typically, I could not leave well alone.
So late afternoon I went and dragged out the truck and used the last of my rust converter on the chassis. I left out the prop shaft and diff, will do them when I get back and get more Vactan. http://i294.photobucket.com/albums/m...psrvtwvdmc.jpg This will be the last work I do till I get back from Texas, Arkansas, Kansas and Oklahoma. |
Re: What did you do to your truck today part III
1 Attachment(s)
Quote:
Maybe I will get to meet you at Clems. Still not sure if I can get out of work. I sprayed some silver paint. :metal::metal: |
Re: What did you do to your truck today part III
Quote:
Looking great mate. Would be good to meet you there if you can make it. |
Re: What did you do to your truck today part III
Quote:
If you can't make Clems, don't forget we will be in the area again , the following weekend if that helps |
Re: What did you do to your truck today part III
Quote:
|
Re: What did you do to your truck today part III
nice work on the frame , i had done something like that before I swapped to r and p
Quote:
|
Re: What did you do to your truck today part III
1 Attachment(s)
Finally finished my steering wheel resto, I can turn my wheels now!!!
|
All times are GMT -4. The time now is 06:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com