Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Have a fun drive to oklahoma,the weather here is not so bad .
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Just dropped Square Peg off with Kyle at Laid Back Recreations, I must say if you haven't met him or seen his work you should ! Top notch guy and top quality work ! Can't edit to see how beautiful he makes her !
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Now the fun begins, for us Okies anyway. I'll get to see some of this first hand. Been looking forward to this!
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Everything looks good. I used Precision Products on my son's truck. Their stuff is nice. I have the vent window seals, but his original ones where in good shape after a good cleaning. I might find a spare set of vent window assemblies and send them off to them for rework. Do you mind telling me what that would cost?

Karl

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks man, your frame sure looks nice ! Don't mind all my screw ups that Kyle found....I will fix them ! LOL, if I didn't have to do everything twice I would have 2 blazers by now !
Thanks man, $237 apiece

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Here she is at her new home for the next 5 weeks Laid Back Recreations with Kyle aka Screaminchevy.....(quite a spotless and perfect home I might add)

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I bet she cant wait to drive this thing laid out

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Love it Mike!

I know I have asked you this before, but hood hinges and will they work on my glass hood?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

They bolt in the factory bolt holes so I sure think they would
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Kyle is killing it already on Square Peg , he has the dash in body work the drivers door gaps done and started bodywork ! AMAZING ! Kyle can you send me a link, I cant find your Laid Back page on this forum ?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

He's the man!
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Wow! What an awesome sheen on that red truck.

;)

Mike, I noticed in the pic with your lovely wife the amount of room in the wheel well you have. What width of rim are you planning to stuff in there? Is it similar in the back?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

22x 8.5 up front and 22x10 in the back

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

BUDNIK wheels just sent the rendering for my new wheels as soon as KEG Media get done adding them to my rendering I will post the rendering featuring my CUSTOM MADE Budnik wheels just for Project SQUARE PEG.....it has been a really great day, just sayin ! https://www.facebook.com/budnik.wheels

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Can never have enough good days:metal:
Can't wait. Gonna be Sweet!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Got some great new parts in yesterday, if you want to smooth your firewall completely off but still need wipers look at this universal wiper set up from SPW (Specialty Power Windows) pretty sweet setup !

Tires came in yesterday also , thank you Atturo tires !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

they often use the wiperset of an old mini cooper for that in europe both on kitcars and hotrods , and they sell simulair sets in the states its a remote wipermotor and a toothed push pull cable basicly you can add the capstands to about any place on the wire hide the motor behind the dashboard and still have good working wipers
with the custom paneling you build inside the enginecompartment you might want to put it inside one of the innerfenders though as they make some noize when placed inside the passingercompartment

they allso seen removeable wiperarms once on a high priced customcar that gave a realy slick look
you might be able to make sunting like that using a stock type wiperarm and keepin them on the capstands with cotterpins
http://www.lynchpinexporter.com/images/side_photo.jpg
dril the hole for them through the wiperarms and capstands so they only mount one way else they might rotate to far out or in and damage the paintjob or the wipermotor
in normal use take the wiperarms off and mount/click a small chromed cover over the capstands

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I wish I could figure out how to post from my phone to here, Kyle sent pictures last night on day 2 the doors are already bodyworked and in prime !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I always email them to my computer and then uplaod them. I cant wait to see Square peg w/ paint. :)

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Saw 'em on FB, looks good!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

well I got 2 of them to load !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

http://i205.photobucket.com/albums/b...ps0b359dd7.jpg

Kyle is all over it.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Man, he works fast!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

He sure does !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Check out the beautiful Canary wood done by Bedwood and Parts....AMAZING !

https://www.facebook.com/BedWood

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Wow, moving fast and great parts, can't beat that...Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I got the chance to check this out in person today. It's going to be another awesome ride when done. You have it in good hands. Kyle will work his magic on it soon.

Looks like you have some killer plans. Subscribed.....

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks guys , I truly believe that Kyle is pretty darn impressive !
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

This is gonna be another killer ride for sure!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Does the pin-striping on the Bed Wood give away color scheme??

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thanks man
....yep

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Gonna be killer!! :metal: Nice work as usual, Mike!!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Is the pin striping inlaid? Looks awesome Mike!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks guys, yes they are inlays done by a custom guitar maker, he just made guitars for Big and Rich

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I knew it purple with pink scallops. Sweet.
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

He does work fast.. but he doesn't cut any corners.. If any body can do it in 5 weeks he can...

Looking forward to seeing the results..

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks for all the nice words guys.. Just a little at a time!
Posted via Mobile Device