The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   My 52 GMC Build (https://67-72chevytrucks.com/vboard/showthread.php?t=648459)

lower50's 10-03-2017 03:25 PM

Re: My 52 GMC Build
 
5 Attachment(s)
So in floor heating pipes where finished Thursday, but due to rain Friday concrete got pushed back to Monday.
But concrete is done!!!!!!! Took 22 yards and is 6" thick. The guys did a great job finishing the floor, nice and smooth but should not be slippery.
I wet it down last night and covered it with plastic, it will help it cure nice and slow.
Attachment 1695692

Attachment 1695693

Attachment 1695694

Attachment 1695695

Attachment 1695696

gigamanx 10-03-2017 03:54 PM

Re: My 52 GMC Build
 
That's a serious amount of floor space. Heated cement sure sounds nice on a cold winter day in the garage.

OutlawDrifter 10-03-2017 03:56 PM

Re: My 52 GMC Build
 
Right on! I treated my floor with a densifier and then hit it with Ghostshield sealer. Seems to work great, so far everything spilled or dripped on the floor just beads up, including brake parts cleaner.

lower50's 10-03-2017 05:40 PM

Re: My 52 GMC Build
 
Quote:

Originally Posted by gigamanx (Post 8053180)
That's a serious amount of floor space. Heated cement sure sounds nice on a cold winter day in the garage.

Ya I can't wait
Quote:

Originally Posted by OutlawDrifter (Post 8053185)
Right on! I treated my floor with a densifier and then hit it with Ghostshield sealer. Seems to work great, so far everything spilled or dripped on the floor just beads up, including brake parts cleaner.

I'll keep that in mind.

Dan in Pasadena 10-03-2017 05:43 PM

Re: My 52 GMC Build
 
Doesn't look like you finished in crack control joints. You are going to saw cut them in later, right?

Dieselwrencher 10-03-2017 08:04 PM

Re: My 52 GMC Build
 
Very nice!

stesch_c10 10-03-2017 11:47 PM

Re: My 52 GMC Build
 
looking good. NOW GET THOSE WALLS AND RAFTERS UP!

lower50's 10-04-2017 03:05 PM

Re: My 52 GMC Build
 
Quote:

Originally Posted by Dan in Pasadena (Post 8053265)
Doesn't look like you finished in crack control joints. You are going to saw cut them in later, right?

Nope no crack joints. They said to make the cuts work he would have to cut 3" deep and with the water pipes it's to close. He would rather a natural crack if there is one.
Quote:

Originally Posted by Dieselwrencher (Post 8053336)
Very nice!

:metal:
Quote:

Originally Posted by stesch_c10 (Post 8053544)
looking good. NOW GET THOSE WALLS AND RAFTERS UP!

Ya I know, winter is coming.

joedoh 10-06-2017 09:53 AM

Re: My 52 GMC Build
 
always interesting to see the different philosophies on concrete by different builders in different parts of the country.

so awesome. I bet you have stood in the middle and looked around imagining walls

lower50's 10-06-2017 06:34 PM

Re: My 52 GMC Build
 
Quote:

Originally Posted by joedoh (Post 8055069)
always interesting to see the different philosophies on concrete by different builders in different parts of the country.

so awesome. I bet you have stood in the middle and looked around imagining walls

Yes almost every day. lol

Dieselwrencher 10-06-2017 08:38 PM

Re: My 52 GMC Build
 
Hopefully they can get it all up before it turns to poo up there. At least the concrete is done though!

Advanced Design 10-06-2017 09:34 PM

Re: My 52 GMC Build
 
Quote:

Originally Posted by joedoh (Post 8055069)

so awesome. I bet you have stood in the middle and looked around imagining walls

I was looking at the picture of the concrete and thinking the same. A heated floor is going to be so nice! Possibly nap inducing on a cold winter day.

rusty76 10-07-2017 08:31 AM

Re: My 52 GMC Build
 
Good thing about a heated floor is you won’t have to use your creeper. You’ll just lay under your car, truck is to low. Lol.

99 to Life 10-08-2017 01:52 PM

Re: My 52 GMC Build
 
why is this almost as interesting as a truck build!!!!

stesch_c10 10-10-2017 10:04 PM

Re: My 52 GMC Build
 
tick tick.. where is the building pictures?

joedoh 10-11-2017 12:51 AM

Re: My 52 GMC Build
 
youre killing me smalls

lower50's 10-11-2017 07:30 AM

Re: My 52 GMC Build
 
Quote:

Originally Posted by Dieselwrencher (Post 8055424)
Hopefully they can get it all up before it turns to poo up there. At least the concrete is done though!

Yes that was a big part depending on weather.
Quote:

Originally Posted by Advanced Design (Post 8055472)
I was looking at the picture of the concrete and thinking the same. A heated floor is going to be so nice! Possibly nap inducing on a cold winter day.

I hope my GF doesn't come in when I passed out and think I'm dead under the truck with empty beer cans littered around me. LOL
Quote:

Originally Posted by rusty76 (Post 8055632)
Good thing about a heated floor is you won’t have to use your creeper. You’ll just lay under your car, truck is to low. Lol.

Absolutely
Quote:

Originally Posted by 99 to Life (Post 8056382)
why is this almost as interesting as a truck build!!!!

I know what you mean.
Quote:

Originally Posted by stesch_c10 (Post 8058363)
tick tick.. where is the building pictures?

Don't get me started I am pissed at my builder and gave him $#!T last night.
Quote:

Originally Posted by joedoh (Post 8058472)
youre killing me smalls

I know sorry ;)

Desert1957 10-11-2017 07:47 AM

Re: My 52 GMC Build
 
Looks great so far, Floor heated is the way to go. My next Garage will have it.

lower50's 10-11-2017 07:54 AM

Re: My 52 GMC Build
 
3 Attachment(s)
So this past weekend I got my in floor heating system done. It's a natural gas on demand hot water heater. It's all pressure tested and thermostat turns on the pump. Now I just need some walls to mount it on.
My GF and I had some fun on the pad as well :)
It was Thanksguiving this past weekend so we had the Fam over and had dinner in the shop... umm on the pad.
Attachment 1698072

Attachment 1698073

Attachment 1698074

youngrodder 10-11-2017 08:22 AM

Re: My 52 GMC Build
 
Nice that you are using the new space already...just think how much fun you will have with walls and a roof.

Marc

lower50's 10-11-2017 09:50 AM

Re: My 52 GMC Build
 
Quote:

Originally Posted by youngrodder (Post 8058548)
Nice that you are using the new space already...just think how much fun you will have with walls and a roof.

Marc

I know, it's going to be great.

rusty76 10-11-2017 12:03 PM

Re: My 52 GMC Build
 
Plenty of elbow room.

Advanced Design 10-11-2017 09:10 PM

Re: My 52 GMC Build
 
Love it...making use of the new shop already. The floor heating system looks impressive too.

Dieselwrencher 10-11-2017 10:28 PM

Re: My 52 GMC Build
 
That floor heat set up is sweet! Very cool, a party on your new pad! :lol: Hopefully your builder comes through for you!

lower50's 10-12-2017 07:16 AM

Re: My 52 GMC Build
 
Quote:

Originally Posted by rusty76 (Post 8058677)
Plenty of elbow room.

Maybe I should rent it out for party's?
Quote:

Originally Posted by Advanced Design (Post 8059017)
Love it...making use of the new shop already. The floor heating system looks impressive too.

Thanks it took a while to figure it all out.
Quote:

Originally Posted by Dieselwrencher (Post 8059083)
That floor heat set up is sweet! Very cool, a party on your new pad! :lol: Hopefully your builder comes through for you!

Thanks I hope it works good. Everyone had fun.
Well I have pretty much fired my builder once he is finished with the pad and back filled, he still can not tell me when he will frame D in the ick. So my brother is done working on his house and him and a friend are going to take over.

OutlawDrifter 10-12-2017 09:14 AM

Re: My 52 GMC Build
 
Quote:

Originally Posted by lower50's (Post 8059222)
Well I have pretty much fired my builder once he is finished with the pad and back filled, he still can not tell me....

Contractors can be very frustrating. Believe me, I know!

My building was supposed to be started in the first week of January. It was the end of February before anything happened. Once it started, it was constant delays that were completely avoidable had the contractor just performed his job.

Keep your head up, it's all worth it when it's done. I've got a crew finishing the install on my heat pump setup for mine today, missed all the necessary months for cooling purposes, but the heat will be nice in a month or two.

lower50's 10-12-2017 09:49 AM

Re: My 52 GMC Build
 
Quote:

Originally Posted by OutlawDrifter (Post 8059251)
Contractors can be very frustrating. Believe me, I know!

My building was supposed to be started in the first week of January. It was the end of February before anything happened. Once it started, it was constant delays that were completely avoidable had the contractor just performed his job.

Keep your head up, it's all worth it when it's done. I've got a crew finishing the install on my heat pump setup for mine today, missed all the necessary months for cooling purposes, but the heat will be nice in a month or two.

Thanks Glad to hear I'm not the only one. I am learning this is normal for almost all construction. Fingers crossed.

rusty76 10-12-2017 05:19 PM

Re: My 52 GMC Build
 
Working in the construction world you see all kinds of contractors. From the over the top, you must do it the hard way to just get it done. Most contractors are good people but sometimes I think they like to promise the world and end up with less than. Some contractors are better spec builders than custom builders. Hang in there.

lower50's 10-13-2017 10:02 AM

Re: My 52 GMC Build
 
Quote:

Originally Posted by rusty76 (Post 8059520)
Working in the construction world you see all kinds of contractors. From the over the top, you must do it the hard way to just get it done. Most contractors are good people but sometimes I think they like to promise the world and end up with less than. Some contractors are better spec builders than custom builders. Hang in there.

Thanks He has been doing great work, he is just 2 months late from when he said the frame would be built and all I have is a pad. But it is looking up.

rusty76 10-13-2017 02:37 PM

Re: My 52 GMC Build
 
With winter and fall coming or if it’s already there for you guys weather will play another roll in framing it. But once dried in it’ll move quick. Glad you have a shop to piddle in. It truly will be nice.

lower50's 10-16-2017 11:17 PM

Re: My 52 GMC Build
 
3 Attachment(s)
So lots has happened, my builder did show up Friday to finish the insulation around the pad. The gas is hooked up and capped at the pad and everything is back filled and graded. :metal:
Saturday we went and bought all the $3000 of wood for the building and it got delivered today. We then moved it all into the backyard. I used child labor today and of course CJ had to be apart of it to. My brother is starting Wednesday and should have it framed by the time we come home from our trip.
Attachment 1699597

Attachment 1699598

Attachment 1699599

rusty76 10-17-2017 06:27 PM

Re: My 52 GMC Build
 
Progress is nice. It would really be nice if it was ready when you get back. Walls and all. Then you could just wrench. Lol.

piratexpress1369a 10-19-2017 07:24 PM

Re: My 52 GMC Build
 
Hopefully you get back and it is all finished lol

joedoh 10-19-2017 09:39 PM

Re: My 52 GMC Build
 
wooooooooood


exciting!

YahamaR1 10-20-2017 09:37 AM

Re: My 52 GMC Build
 
Looks good, hope to see new pictures soon..

FLJerry 10-22-2017 01:20 PM

Re: My 52 GMC Build
 
Lower50s,
Amazing build you have there!
As a Chevy ‘55-’57 big back window guy, I usually don’t follow too many AD threads, but after seeing your fuse/relay power distribution center [PDC] on another thread I just had to read your entire thread. Again, absolutely a cool build.
For some reason, not too many builder’s choose to build their own electrical wiring system. I plan on building my own electrical system, using a PDC (30+ fuses and 16 relays) behind the cab in an environmentally safe enclosure. Glad to see others do their own electrical systems -- a good way to lessen the short-comings of kit manufacturers.
FLJerry

lower50's 10-30-2017 08:17 AM

Re: My 52 GMC Build
 
Quote:

Originally Posted by rusty76 (Post 8062778)
Progress is nice. It would really be nice if it was ready when you get back. Walls and all. Then you could just wrench. Lol.

Quote:

Originally Posted by piratexpress1369a (Post 8064088)
Hopefully you get back and it is all finished lol

Quote:

Originally Posted by joedoh (Post 8064225)
wooooooooood


exciting!

Quote:

Originally Posted by YahamaR1 (Post 8064453)
Looks good, hope to see new pictures soon..

Thanks guys. I am back
Quote:

Originally Posted by FLJerry (Post 8065873)
Lower50s,
Amazing build you have there!
As a Chevy ‘55-’57 big back window guy, I usually don’t follow too many AD threads, but after seeing your fuse/relay power distribution center [PDC] on another thread I just had to read your entire thread. Again, absolutely a cool build.
For some reason, not too many builder’s choose to build their own electrical wiring system. I plan on building my own electrical system, using a PDC (30+ fuses and 16 relays) behind the cab in an environmentally safe enclosure. Glad to see others do their own electrical systems -- a good way to lessen the short-comings of kit manufacturers.
FLJerry

Thank you I totally agree I could not find a kit that I liked, I also get more satisfaction doing it myself. Did a similar panel in my Jeep both work great.

lower50's 10-30-2017 08:25 AM

Re: My 52 GMC Build
 
4 Attachment(s)
So I'm back trip was great, I'll get to that soon.
Shop is coming along nice almost to the point I was hoping when I got home. My brother is doing a great job. Trusses got dropped off just before we left. 3 friends and I carried them into the back yard. 21 @32' long and we figure 250lb that was some work. The steel for the roof is now sitting in my driveway.
Attachment 1703263

Attachment 1703264

Attachment 1703265

Attachment 1703266

lower50's 10-30-2017 08:36 AM

Re: My 52 GMC Build
 
3 Attachment(s)
So trip south was amazing and truck ran great, no issues at all. Wednesday Oct 18 we drove 5 hrs to Grove city PA and spent the night. Thursday we drove 10hrs to Charlotte Motor Speedway. We where at 65mph with the cruse control on all the way there. 780mi and used 55gal of fuel, that's 2 1/4 tanks of fuel. 2 fuel stops 14mpg :metal:

Attachment 1703271

Attachment 1703272

Attachment 1703273

OutlawDrifter 10-30-2017 09:09 AM

Re: My 52 GMC Build
 
Nice to see some progress on the building. Glad your trip went well, I saw a cool picture of you on the racetrack on Instagram.


All times are GMT -4. The time now is 05:58 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com