![]() |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
and then I powder coated it again, and although this time it took, ie the powder stuck, it dried all dull ie matt instead of glossy
and I powder coated a door hinge at the same time and that dried nice and glossy like all the other parts, so I have no idea what is up with this saucer and honestly as long as it's black and protected from rusting I really don't care |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
so big day tomorrow all this stuff gets bolted on
Electruck EV Conversion Update 2 Front End Rebuild / Disc Brake Upgrade |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Always a good feeling to check a box
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
happy to report the final assembly has commenced and with the help of two great new friends and forum members without whom there is no way I could have done what we did today, we got the trans mounted, the cab mounted, and the crossmember installed (we could not mount the control arms as I am still waiting on the rubber seals
Fun Level: 11.2 |
Re: My Dusty 71 GMCe Electruck
Coming together really nice, I’m enjoying the journey.
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
hope you all had a great fathers day, I got to go fishin' and here's what I found:
yup it's a 1" anti swear bar, and judging from the 8 lugs that appears to be a 3/4 ton Squarebody (couldn't tell what year) but the word on the street is that it could might work Fun Fact: some of these are held on to the frame with brackets using 3 factory rivets and 1 bolt, other's using only two factory rivers and 2 bolts (the rivets have to be drilled out [ahem] in the field) Fun Level: 2 Note: these trucks still use the 67-72 style lower control arms, how neat is that, tells you what a great and smart design they were |
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
now what's more better than one anti swear bar?
that's right two anti swear bars this next one is fatter than 1" and came off of a GMC 2500 rig (I recall 10 years ago you could find half a dozen 1/2 ton short box trucks in the yard, these days you might find one or two 3/4 ton 8 lug long bed work trucks completely wrecked or stripped down) by the way they was $45 bones each, not bad though the rubber is perished |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
so then it was time to transfer all the dirt, grime, and rust off of these beauties and onto my face
first the 1 1/16th skinny bar (or at least that's what it calipered too, maybe that included a layer of dirt, grime and rust) |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
wire wheelin' like a Boss !
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
I believe when it comes to de rusting it take two to Tango, abrasives and acid
Prep & Etch Phosphoric acid from Home Depot (like all them fancy de rusting conglamorets at a fraction of the cost and works way better) used to be $5 bucks per gallon now it's like $20 also this is the new(er) California formula so no rubber gloves required (jk) |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
then it was time for the big stick, cause I haven't decided which one I'm gonna run yet, any advice?
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
a little before and after the dance of the wire wheel, then primer then paint, I like my rods silver and my sheets black
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
and here are them brackets that are usually rivited to the frame rails, these will also get media blasted (I hate putting greasy bits in the media blasting cabinet as it gunks up the media) and then later powder coated
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
hey I know let's check on those $3 dollar rubber seals that are holding up the project and preventing us from putting the control arms back on
how did that saying go again: "Neither snow nor rain nor heat nor gloom of night stays these couriers from the swift completion of their appointed rounds" |
Re: My Dusty 71 GMCe Electruck
Looking good
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Anti Swaybar (pronounced: "Stabilizer bar") sizes according to Rock Auto
1-1/16 (in) (ah maybe I'm not crazy and my measurements were accurate) 1-3/32 (in) 1-1/8 (in) 1-3/16 (in) 1-1/4 (in) that's it, where is Keith when you need him??? |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
yes the mind blowing excitement continues ...
[rant] this stuff makes me think the next time you go to buy a truck or sell a truck and you or some dude want's $15K for it just pay it, or go ahead head over to Pick N Pull when it's 104° F out, in hopes of finding a donor truck, lay upside down on the gravel and drill out them rivets with your cordless and a stash of extra batteries, while the scorching hot metal shaving find their way down yer sleeve, throw in a few cuts and bruises and a solid head bump on the edge of that sharp front bumper.... I'll hold, ha ha [/rant] |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
also media blasted the other three hinges
|
Re: My Dusty 71 GMCe Electruck
The larger sway bar will have less body roll when cornering. I would use that one.
|
Re: My Dusty 71 GMCe Electruck
Nice build and looking forward to seeing how this turns out. I have a question - Is the larger sway bar from the 1985 GMC 2500 a direct bolt up to the 67-72 trucks. I have a 72 C20 and would like to go to a larger bar but not want to pay the high cost for a new one. And I also do not want to drill any holes to make one fit.
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
Quote:
1. my '69 frame only has one hole on each side instead of two, a friend of mine tells me that yeah we will have to drill out the rivet that holds the very front small crossmember in place and use that hole for the second hole. I hope you follow that and it makes sense. 2. the 85 bracket holes don't align perfectly (maybe 1/8th of an inch too narrow and the bracket needs to be spread out just a tad) but is it because I am putting C20 brackets on a C10, or is it because I am putting '85 brackets on a '69 frame or is it because there is still a river in the way, or is it because the bracket may have been warped a bit??? feel me, just trying to help (and get motivated to drill out yet more rivets, lol) |
Re: My Dusty 71 GMCe Electruck
Quote:
Your friend is correct the rivet that helps hold the front crossmember brace on does have to be removed when installing a sway bar on a truck that did not come with one. Thanks for responding back to me. Now I will look for a 85 GMS 2500 front bar. Since I am in Texas, the Land of trucks. Maybe I can locate one cheap. |
All times are GMT -4. The time now is 02:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com