![]() |
Re: My 50 roadster pickup build
Looks good Jim!
Going steady, before you know it, you'll be on the raod again! |
Re: My 50 roadster pickup build
Reaper, want to share some info on the Tig unit you are using? Nice job.
Rich |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Jim, I really like the New turn signals your using. Did you use the Hagen frenched head lights ?
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
3 Attachment(s)
Well, managed to get a few hours in the shop today.
Pic 1 Is the location of the existing turn signal, that needed to be cut out. My old system was welded to the fender, new ones are different. Pic 2 Back side of fender. Pic 3 After cutting out the old system. |
Re: My 50 roadster pickup build
5 Attachment(s)
Pic 1 & 2 Old and new system side by side.
Pic 3 This is the rubber sleve that is held tight to back side and then tighten the clamp to hold everything in place. Pic 4 From view of new unit in place. Pic 5 Rear view of new unit in place. |
Re: My 50 roadster pickup build
1 Attachment(s)
Well I couldn't help myself, had to throw a couple bolts in the fender and set it in place to check the fit. Don't see any major problems. Will have to wait till next week and Mark can help me install inner and outer fender together to see if any cutting and welding are needed.
Fender is back on the horse already, till next time...Jim |
Re: My 50 roadster pickup build
I like those new turn signal units.
I'm impressed that you can get back into fixing it so quick. I'd be so depressed I'd probably just stare at it and hope it would fix itself! Hope there isn't to much cutting and welding. |
Re: My 50 roadster pickup build
That new turn signal assembly looks like a simple install. It looks good too. Repairs are coming along very well.
|
Re: My 50 roadster pickup build
Quote:
Believe me when I say I hoped it would fix itself, hoped it was a bad nightmare, but it wasn't...Jim |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
I like the chrome trim ring of the new light. It adds just the right amount of bling. The repair is looking really good.
Marc |
Re: My 50 roadster pickup build
Faribran, The TIG unit I have is from Eastwood (TIG200) AC/DC is is an awesome TIG machine! and you can find them on sale for around $700.00 and they offer a digital 200 AC/DC unit now for $1000.00
Both units have a trigger on the torch so you don't have to use the foot pedal all the time (like under a car) hope this helps. Mark |
Re: My 50 roadster pickup build
Coming along nicely!!
To be honest, I like the new turn signal more than the old one, it looks great!! |
Re: My 50 roadster pickup build
Quote:
Quote:
|
Re: My 50 roadster pickup build
Looking good Jim!
I like the new turn signal approach too. Not that i didn't like the prior look but this just looks a bit more finished. Matching the headlight chrome and grill is just a bonus. You ARE aware that chrome adds 10 horsepower, aren't you? It's kinda like the huge diagonal letter "R" graphic on Japanese import cars! Lol. |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Coming along real good! Almost time for the rattle can and call it a day ;)
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
wow good updates! you will be ready for the summer shows for sure
|
Re: My 50 roadster pickup build
Did you say you are going with a chrome grill this time?
If so, are you buying a reproduction or getting an original one re-chromed? |
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Quote:
|
Re: My 50 roadster pickup build
Quote:
and nuts) between all of the sections were all very cheap poorly plated steel. I ended up jigging the whole thing up on the bench and replacing with stainless steel 10-32 hardware. Also, the unit was fastened with a slight skew and twist when I got it, so I straightened that out too. A lot of the hardware was loose too. The chrome looks really nice though, so I'm pretty happy! Hope your's has better hardware. |
All times are GMT -4. The time now is 05:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com