Re: What did you do with your truck today, Part 3
 

Finishing up my cam/vortec head swap.

Re: What did you do with your truck today, Part 3
 

Yeah, I am thrilled to get the 235 back in, I dig them.

Brian

Re: What did you do with your truck today, Part 3
 

I got out there and got to the garage and welded up those odd holes on the bottom of the cab corners, WHOOOHOOOOO!


Brian

Re: What did you do with your truck today, Part 3
 

after a year and a half of work ( and wages) focused on my wife's car getting it back on the road after a 25 year stint in a barn, my truck got a new seat! time to put in a power rack as well.

Re: What did you do with your truck today, Part 3
 

love it dude. I`ve been a fan of tpi motors for a long time. I know they have started to go the way of the dodo but they are cool and work well. looks really good. im considering doing a vortec head/cam on mine this winter. you can get better than 50hp from the switch.

Re: What did you do with your truck today, Part 3
 

Sorry, no photos. Just got out there and put in my "five minutes" grinding some welds smooth and removing what was left of the windlace channels, getting it a step closer to getting some primer on it.

Brian

Re: What did you do with your truck today, Part 3
 

I really didn't think I was going to get any garage time today. however I was determined to do something. when I was walking past the truck coming in from a family dinner I saw my repaired fender on the ground and decided it was time. I got the fender sitting on there with most of the underside bolts in loose. im going to the hardware store tomorrow to get some matching button head bolts to use on all the visible parts. will have the fender buttoned up tomorrow. happy about that.

Re: What did you do with your truck today, Part 3
 

Thanks. I’ve been tinkering with several of these injection setups over the years myself. This one is bolted to a basic 260 horse crate engine I wanted to wake up a bit so the head & cam should do the trick. I’m guessing about 325hp with the swap.

Re: What did you do with your truck today, Part 3
 

It is friggin magical how much you can get done in just a few minutes every day!

Brian

Re: What did you do with your truck today, Part 3
 

sadly I don't have a lot of opportunity during the week so I try to make sure I get something done every weekend.

Re: What did you do with your truck today, Part 3
 

[QUOTE=mobileortho;8278459]Thanks. I’ve been tinkering with several of these injection setups over the years myself. This one is bolted to a basic 260 horse crate engine I wanted to wake up a bit so the head & cam should do the trick. I’m guessing about 325hp with the swap.

mine is similar to yours but carbed. im going to do some gears , head/cam and try to get close to 375hp. its running so well that I don't want to touch it right now though. nothing major until the weather sucks again. motor wise all im going to do anytime soon is to install a larger cooling fan. its hot in Oklahoma and I have what look like a 13 inch fan. not getting hot though.

Re: What did you do with your truck today, Part 3
 

I hear you, I can get out there every day thank goodness. But what you are doing is better than putting it off for the "perfect time" too, keep it up!

I got out there today and did a bunch more little things all over the cab getting it ready for some primer and weld in a few more panels. I got it out and sand blasted more, OMG that is hard work, geeez.

Brian

Re: What did you do with your truck today, Part 3
 

Very nice looking seat

Re: What did you do with your truck today, Part 3
 

I painted and installed the new frontend parts, repainted the gas tank filler c notch, and put a new bed on just for looks!!! Boy, from all the posts about trouble with the bed, this one went on in literally 2 seconds!!!

Re: What did you do with your truck today, Part 3
 

I didn't get to finish my fender. I really just needed 45 minutes but had things come up all day and then boom. its 10pm. oh well. I did get all of my hardware so I can get right on it next time.

Re: What did you do with your truck today, Part 3
 

I got out there and worked my ever loving butt off sand blasting, welding up more crap found, grinding, plannishing, and came in giving up.

I then went back out there tonight after falling asleep on the couch and did a bunch more. Made all the patches and welded up my floor pan. I thought about replacing it, or making the whole thing new. I gave up thinking about it and just patched up the floor, done deal and will move onto the next thing.

Brian

Re: What did you do with your truck today, Part 3
 

:haha:

Re: What did you do with your truck today, Part 3
 

Still awaiting other mail order parts so I used my "five minutes" installing door handles and their rubber gaskets. For the first time in who knows how many years the doors open and close with the handles!

Re: What did you do with your truck today, Part 3
 

went at my fender again. I couldn't figure out why nothing was lining up. then I noticed I had the fender on top of the core support instead of under it. moved it under the core support and things are going much better. I have a bolt in every hole and am now just trying to line everything up. it was a good 45 minutes.

Re: What did you do with your truck today, Part 3
 

Right on! I don't beat my self up when I find something like that, I am just happy I did!

I was side tracked by an old friend coming by. My oldest living car buddy, we rode our mini bikes together. Only guy I have ever been in a car with at 120+

So I figured my five minutes was gone, nope, I got there and ended up spending an hour or more. I got all the hidden areas coated with Ospho where I will be spraying some epoxy primer and getting the last few metal pieces welded in to cover it up. I made a neat sprayer out of a regular spray bottle, went to the hardware store and got a few feet of clear rubber hose that fit the sprayer head perfect. It was a piece of cake to get down in all the hard to reach places, damn I'm smart.

But I got it done, a bit of sanding and I will spray it with epoxy primer, probably Saturday morning.

Brian

Re: What did you do with your truck today, Part 3
 

good work man. I didn't get anything done today. had to work late and then went to the gym.

Re: What did you do with your truck today, Part 3
 

I don't go to the gym, I go for a fast pace walk (one mile in 14 minutes). So after I got the work done on the truck tonight I took off for a few miles. :metal:

I got out there and prepped a few things for primer. Also did a little planning and I solved a problem I had with how I was going to have the rest of it sand blasted and then prime it, can't believe how easy that was. But something got done. All the hidden spots I will be priming look damn good.

Brian

Re: What did you do with your truck today, Part 3
 

Did the modification to my passenger side door striker plate (push-button doors on a pull-down handle cab), then adjusted the door. Closes and latches for the first time in decades!

Re: What did you do with your truck today, Part 3
 

Right on!

Brian

Re: What did you do with your truck today, Part 3
 

Got the wipers working. Used MMO to lube the diaphragm and after a couple days they work fine now.