Re: Daverods project 66
 

:haha: :haha: LMAO

Was it the bushing in the pump?

Re: Daverods project 66
 

Easy fix or not so easy.:uhmk:

Re: Daverods project 66
 

if its the bushing you just need to find something to drive it in there without kinking it but if it something more then im not sure.. ill look at one of my trannys at the shop and see what you pulled out :lol:

Re: Daverods project 66
 

looks like you just pulled the guts of the seal out. Go get another one and put it in.

Re: Daverods project 66
 

check the converter too maibe it has a groove in it causing the new seal to get ripped too ....... there sleeves available to repair that

Re: Daverods project 66
 

I had an extra 350 transmission. I just painted it and used it. Got my flex plate bolted on. Installl the TC and mounted the trans to the engine. Need to get my brackets welded on my axle and get my drive line shortened. Scripped one of the threads when I went to put the flex plate on. Sucked. Had to do a helicoil.

Re: Daverods project 66
 

Guy at Autozone had one of these. I thought he built it from scratch at first. Looked way cool. It's a kit $150-200. Goes 40 and gets 150 mpg.:metal: Island park and back for $5.

Re: Daverods project 66
 

The seal was aready out. I thought the pump thing was the seal and tried to pul it out.:waah:

Re: Daverods project 66
 

Does the sleeve go on the TC?:uhmk: The TC I used was kinda worn alittle on the shaft. I was wondering if I should get a new one. Hay I gotta start cutting or I'll never get done.

Re: Daverods project 66
 

TC ? it goes on the torque converter the part the (now destroyed) seal slides over on the outside

Re: Daverods project 66
 

TC torque converter. I was getting lazy. I saw that sleeve when I bought the seal. I thinking I should have got it.:waah: The end of the TC I used was alittle worn. No sharp edges just alittle wavy.;)

Re: Daverods project 66
 

dont know anything about the exact mounting procedures or if you need to machine the surface for the bushing or just sand it down get it to slide over but i guess that bushing is made from pretty thin material you need to press on there maibe you should ask an trans rebuilder if its a hard job and how to do it

Re: Daverods project 66
 

Worked on my drive line. Looks like I need it about 6 3/4 " shorter. Guy said he would do it for $65. Put a new carrier on. Leveled my frame to see how much the line increases and decreases when the axle moves up and down. It was only about a 1" in differance.:uhmk: Bought a sleeve for my torque converter now I just need to see how to get it on.

Re: Daverods project 66
 

Hey man you know your last post was over a month ago. You better get some work done.

Re: Daverods project 66
 

Yeah, I agree!!! I guess I shouldn't talk. :lol: I need to get motivated. :uhmk:

Re: Daverods project 66
 

I know he is alive --I sent him a PM yesterday -I was trying to get him to come to Northwest Motorfest in SW Idaho
Dave .........Check in with progress and pictures please

Re: Daverods project 66
 

I'm still here. Broke but still here. I know you have some pictures to show us Bubba.;)

Re: Daverods project 66
 

Got my tabs welded on my axle, used JB weld to seal up the seams on my bed sides. Put some more plates in my bed. Need to get a different yolk for my transmission the one I have has the smaller u joint. Looks like about 4" needed to be cut off the end of the drive line.

Re: Daverods project 66
 

Few more. Wish my dog would learn to jump.:lol:

Re: Daverods project 66
 

those are sweet and looking good Dav. keep at it.

Re: Daverods project 66
 

I love this one. The caption should say:
"WHAT THE HELL YOU LOOKEN AT?"
http://67-72chevytrucks.com/vboard/a...1&d=1278869703

Re: Daverods project 66
 

:metal: Great looking work and beautiful dog.:metal:

Re: Daverods project 66
 

lookin good dave

Re: Daverods project 66
 

He's waiting for me to come pick him up.:lol: His balls are to big he has'nt learned to jump.

Re: Daverods project 66
 

leave him there long enough and he yawhn and jump in on his own hes just playing yah

the floor with the licenceplates is a nice idea haven seen that one before

Re: Daverods project 66
 

He's got you trained well Daverod. :lol: Although with a Rotti's tendency to hip problems it is probably best to lift him in.

Re: Daverods project 66
 

Got my drive line cut and balanced. Had to buy a different yoke, switched everything to the bigger u joint size. Installed new carrier bearing. :uhmk: Welded up the bolt holes where the chains attached on my bedsides. Sanded down my roof on the 64 skimcoated it, shot it with some feather fill and painted it. Maybe do the back of the cab next weekend.

Re: Daverods project 66
 

Looking good Dave

Re: Daverods project 66
 

Thanks and no you can't have my roof. I know you want it. I saw there was one on ebay.:uhmk:

Re: Daverods project 66
 

Is this thread going to die a slow death?? Dave you cant quit us now. Keep working on it.. Any progress is still good progress:bowtie:

Re: Daverods project 66
 

Hay I did just buy two rusty front fenders on ebay.:metal: Even got a patch panel for one of them. Recieved my air line and connectors for my bags. Haven't had much time or money. When I get home I'm beat. Working on a addition to a house and there's no shade. White house, white concrete ,you get the idea.:waah: When I do have energy I waste it improving my wake boarding skills. Did a face plant so hard I was'nt sure if my eye balls were still in my head.:metal: Don't worry I willl finish my truck.,;)

Re: Daverods project 66
 

Re: Daverods project 66
 

Work = Money = Parts :lol:

Re: Daverods project 66
 

good lookin truck. nuttin better than a guys truck and dog :uhmk:

Re: Daverods project 66
 

So thats where I'm all screwed up. I knew about the parts part.:lol:

Re: Daverods project 66
 

Ya Baby. Christmas came early.:metal: Work=money=tools/parts. Thanks for clearing that up for me Bubba.:lol::lol: About time to fire up Daverods Paint Shop.

Re: Daverods project 66
 

:ito: Hey - that was supposed to come to my house!

Re: Daverods project 66
 

I know you need one.:lol: Everyone needs more tools.:smoke: Now all I need is to figure out how to wire it. Wheres that Bubba guy when you need him.

Re: Daverods project 66
 

Now ya have think how your going to plug it in. I don't see no 220 outlets. :uhmk:

Re: Daverods project 66
 

They drop shipped it to the wrong coast. :lol: Is it a 2 stage? Looks nice.:5150: