Re: Junkyard Jimmy Super Low Buck Build Thread
For blotchy, do as mentioned. But also keep the most constant speed you can.
Agree about the looking under fenders. Missed a spot on my last primer job, DOH!! |
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
Quote:
I took vacation for tomorrow, so I have from tonight until next Monday to mess with it. Then I have to leave for Omaha for work on Tuesday. Time to do more cleaning and taping. |
Re: Junkyard Jimmy Super Low Buck Build Thread
|
Re: Junkyard Jimmy Super Low Buck Build Thread
And 1 for me, most songs hook you with a guitar riff, this one hooked me with the drums....
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Let 'er rip, Tater Chip!
Posted via Mobile Device |
Re: Junkyard Jimmy Super Low Buck Build Thread
Might not be getting sprayed this weekend now. Their dad is going to use the booth this weekend and they said I might be able to get it in next week, during the day if they don't have to use it. Dammit!
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Sorry to hear about the set back.
Killer vids though man! Gotta look on the bright side, More time to look for another project. |
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
Like this one? http://i108.photobucket.com/albums/n...s/DSC01101.jpg With a bed like this maybe... http://i108.photobucket.com/albums/n...psb150e93b.jpg |
Re: Junkyard Jimmy Super Low Buck Build Thread
I was thinking time to check again to make sure all the body work is done.
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
|
Re: Junkyard Jimmy Super Low Buck Build Thread
no, its just easy to forget stuff when your on a project that long
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
Quote:
Friend from the body shop came by so I could see if I was taping it up right. I wasn't. Had to pull off about half of what I had done because I was too close to the edges. He said to stay away from the edges or it can peel the paint off with the tape in an area that will require a repaint. I looked at how they taped my truck (:dohh: Why the hell didn't I think of that before) and now I know better. Most of that is fixed, just need to correct the driver side door area. He said I should try to cover the underside of the hood too, which is gonna be a bit of a PITA. But overall he said it was ok and gave me tips for the rest of it. Since I'm not painting I think I'm gonna get in some fishing this weekend. The boat is running good now and I don't have many days before the weather gets uncooperative to be out on the water. I went last weekend just to check out the motor and get some worms wet. I caught about 10 fish, all to small to bother cleaning. My youngest likes to fish and we need some fresh stuff to fry up. |
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
http://i108.photobucket.com/albums/n...psacf68bd6.jpg The hitch came with some 1/2" thick re-inforcement parts, but I used them as spacers between the hitch and frame, then had other re-inforcement plates to use on the other side of the frame for added strength. The side views of the hitch show it good. I can't remember what holes I had to drill, if any. http://i108.photobucket.com/albums/n...ps12a69b16.jpg http://i108.photobucket.com/albums/n...pscebfd9a6.jpg http://i108.photobucket.com/albums/n...pse71cc121.jpg This is no way close to how the manufacturer recommends installing this hitch. I used what I had available and did the best I could to make it work. It's a class 3 hitch and I used this same set up (minus the spacers between the frame and hitch) on my C-10 for a few years to pull a 20" Four Winns open bow run about with inboard/outboard. The boat itself weighed over 3000# I think. Never had any issues and my frame rails on the C-10 looked just fine after I removed the hitch. I have no intention of ever towing something that heavy with the Jimmy, but I wouldn't be scared to if I did. Hope this helps. |
Re: Junkyard Jimmy Super Low Buck Build Thread
As for a Jimmy update, I did more taping.
That is all. Go about your business. |
Re: Junkyard Jimmy Super Low Buck Build Thread
Thanks for the pictures. I was out test fitting it about the time you posted them. I now see a few things that I wasnt figuring out when test fitting.
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Catch any fish?
Posted via Mobile Device |
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
Quote:
I have almost all the taping done that I can do before I get in the booth. Except for an adjustment to make on the driver door edges anyway. I wiped it all down with wax/grease remover this morning and have some paint prep stuff to use before I spray it that is a milder solvent and flashes off better. I'm heading to Fremont, NE tonight and home late tomorrow. Will figure out when I can get in the booth after that. |
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Quote:
BTW, Looks like you have been taking remedial courses at sensitivity school. (signature) I stopped by the body shop on my way out of town yesterday and I was told the paint booth is mine tomorrow. Fingers crossed. Working all day here in NE, then a 5 hour drive home tonite, so I won't know for sure til tomorrow morning, but it looks good. I will have both brothers there for support and advice all day too, which helps ease my mind. Worst case is I will have to do some sanding and respray. It's not like I'm going to break anything. :smoke: I better put in for a day off before I forget. |
Re: Junkyard Jimmy Super Low Buck Build Thread
Yeah, i guess i have to change the siggy, after finding out ive had 4 strokes, kinda made me think i need an attitude adjustment. The whole situation of health, just made me rethink things....im not as tough as i once was:lol:
Progress and build time are differant topics, seems to me your always doing something. Good luck in the booth, hope it all works out for you |
Re: Junkyard Jimmy Super Low Buck Build Thread
WooooooHoooooooo! Time to load up and rock and roll, Boys! Good luck, and send us some in progress shots!
Posted via Mobile Device |
Re: Junkyard Jimmy Super Low Buck Build Thread
Go Mike! I hope it all goes well.
|
Re: Junkyard Jimmy Super Low Buck Build Thread
Sorry fellas. Not today. Maybe tomorrow. Probably tomorrow. They got a business to run and yesterday afternoon a customer wanted something done today that they need the booth for. Paying customers take priority.
|
Re: Junkyard Jimmy Super Low Buck Build Thread
1 Attachment(s)
Its time to spray.
Posted via Mobile Device |
All times are GMT -4. The time now is 08:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com