Re: PO has me PO'd
Trying to figure out how to fix my heater control, seems that a number 4 screw would fit, so i can drill and tap. Used my dremel cutoff wheel to get rid of the burr on the rivet, now it will act as a alignment dowel. Just have to drill the center
http://i89.photobucket.com/albums/k2...210_115334.jpg |
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
Quote:
Actually, the master cruise switch looks like a dealer installted option, so i will be opting for the turn stalk switch....thought i could use both, but M&H says i cant Vacuum, that is another story. Was goning to use a air pressure gauge, for my compressor, but decided a vacuum gauge would be more usefull in keeping my foot outta the throttle....WOT Found it on the classifieds, so im guessing its stock |
Re: PO has me PO'd
hehe, I think I may have mixed my metaphors or something. I meant was your cruise system a vacuum operated one...Do you have a vacuum guage too? I put one in my Blazer too, but still haven't figured out what it is telling me.
That stalk kind of looks like the one I have on my 71 pickup. Its a 73 and up aftermarket system that Sears used to sell. It ran off of vacuum and a magnet on the driveshaft for speed input. Mine has a slide on off switch too, though. |
Re: PO has me PO'd
[QUOTE=jaros44sr;5186429]Found it was easiest to clamp the bowl to a work surface, gave you two hands to start the retaining pin
http://i89.photobucket.com/albums/k2...203_111158.jpg http://i89.photobucket.com/albums/k2...208_120313.jpg Not much to put the turnsignal switch in... Waiting on the bearings to come in from Wes, Classic Heart Beats. Thanks kean for getting me back on track with those photos You are welcome sir....I try to give back what little I can to a forum who has helped me SOOOOOOO much.... :chevy: |
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
[quote=keanevann;5189038]
Quote:
|
Re: PO has me PO'd
|
Re: PO has me PO'd
Not black, I'd have it powder coated a chrome or bright silver.
|
Re: PO has me PO'd
Quote:
Finish has to be brush/roll on, durable. Powdercoating is out right now, dont have access to a large oven, yet! http://i89.photobucket.com/albums/k2...215_121449.jpg |
Re: PO has me PO'd
How close is it to the rings/buckets? I'd think it would look better if it matches spot on or is black or bright silver like the trim.
|
Re: PO has me PO'd
I vote for black.
|
Re: PO has me PO'd
Quote:
Quote:
|
Re: PO has me PO'd
Nice guard. Do you want it to stand out or blend in? Black for the first and white for the second. I vote black.
|
Re: PO has me PO'd
Quote:
Maybe i should run a poll and let that answer my situation, dunno |
Re: PO has me PO'd
Gravel Guard seems to level everything out, so no need for tedious prep work. Probably paint it spot on, as Jonathon suggested and go with a graphite to match my grille hoops
GONE FISHIN' http://i89.photobucket.com/albums/k2...217_140007.jpg |
Re: PO has me PO'd
Have fun, good luck, and be safe.
|
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
I passed up one of those brush guards several years ago. Wished I wouldn't of now, man it looks sweet!
|
Re: PO has me PO'd
Quote:
http://i89.photobucket.com/albums/k2...301_142701.jpg |
Re: PO has me PO'd
You're back. How was the trip? Pics? Get the fish smell off your hands yet?
|
Re: PO has me PO'd
Quote:
Balmy 17 degrees in the morning http://i89.photobucket.com/albums/k233/jarosaj/202.jpg Still waiting on my bearings, seems Wes's roof fell in, and lost some of my contact info. which caused the delay...never heard that one before:lol: Picked up the last pieces of my speed warning speedo, pretty excited to start that mod. |
Re: PO has me PO'd
Thanks Wes, got the bearings and othe r parts in today, even with your roof falling onto your motorhome, you still had time to get my parts out... What a guy!
|
Re: PO has me PO'd
Where did you Drop the hooks?
|
Re: PO has me PO'd
Quote:
|
Re: PO has me PO'd
your skill, patience, and determination is outstanding. You have a work of art on your hands. I let life get in the way of mine and it sits waiting on me.
Nice job. Semper Fi. |
Re: PO has me PO'd
Quote:
I really feel like this year is the one where i get to drive it Semper fi |
Re: PO has me PO'd
Bearings in, weird on the wedge, never saw a bearing race installed like that...service manual says to run the nut down until all the space is taken up, then give it a 1/16 - 1/8 turn more. Make sure the streering shaft is straight, when you tighten the retaining nut
Finally, the tilt works....last part of the puzzle was to install the spring to control the return, just a phillips screw driver and alot of pressure http://i89.photobucket.com/albums/k2...304_135223.jpg http://i89.photobucket.com/albums/k2...4_135323-1.jpg |
Re: PO has me PO'd
Got the wires fed thru the chase, canceling cam installed as well as the adapter for the wheel...getting close to getting outta this mess. Strip and paint cover, probably black
http://i89.photobucket.com/albums/k2...306_142823.jpg |
Re: PO has me PO'd
Yep, you guessed it....turnsignal/cruise stalk, as well as turnsignal switch screws have to be removed to get the cover plate on, if you have the red hazard button...
Thats it, next time ill get the three pieces powder coated grey http://i89.photobucket.com/albums/k2...307_133738.jpg |
Re: PO has me PO'd
I bet I took mine apart and back together 3 times before I got it right. What sucks is that afterwards I found the hole where the blinker handle screws in had cracked. PITA to swap out so I left it as is. Mine needs repainted and I'm thinking I might just buy a nice shiny aftermarket one and sell mine.
Yours will be solid though once it's painted. Looks good. |
Re: PO has me PO'd
Quote:
Blinker, havent heard that in awhile:smoke: Nice work on the ws frame repair |
Re: PO has me PO'd
How you do that Jim.I have a tough time figureing out how to get the Horn cap/retainer working,and It still dont work LOL .Nice work
|
Re: PO has me PO'd
Quote:
Wierd, but back in HS when my father gave me the families '62, the first thing i did was the same type of steering wheel and cragers, had problems then, 40 years later still have the same problems. Youd think they wouldve redesigned it by now:lol: |
Re: PO has me PO'd
Jim, been a while since I stopped by, but I'm caught up. You are definitely in what my wife calls "the fiddly work" of the project. Tedious stuff, but I love when somebody takes the time to do it right.
|
Re: PO has me PO'd
Thanks for stopping by, tynee. Say hi to the wifey for me...
Trust me, if i do something wrong, ive got a whole bunch of guys on this forum ready to let me know:smoke: Had to hold up on my project for some house work, just three weeks! Ordered some parts while i was busy doing electrical Billet hood hinges Electric water pump with port for heater hose Valve covers Speed warning head and tin Every time i think i have the cooling system cured, something changes and i have to rethink, redo the system. This could be the last time. Change the outlet on my rad. to accept 1 3/4" hose, mandatory for the 50 GPH pump. Just got done collecting all the fittings in 1 1/2" aluminum, w/ pipe 70shortfleet did an excellant job punching out my non tach tin, and sandblasting, painting |
Re: PO has me PO'd
Out with the old, in with the new....2003Silverado nailed the problem right away, seemes that i dropped my neutral, all the years of the shielding passing thru the wall corroded my shielding on my main cable. I think Edison installed my electrical power, right after the block in Brooklyn
http://i89.photobucket.com/albums/k2...405_141310.jpg Nice work by Les. quite the drama down in the classified on this purchase, but Mel being the good board member he is, got me thru it S/B the last upgrade on my dash, steering column. Now to move on to other problem areas http://i89.photobucket.com/albums/k2...411_112608.jpg |
Re: PO has me PO'd
Thanks Jim for the That a boy ,29yrs In the trade you see/and deal with all sort of things.Wish I could have helped out more. when you coming for a visit?
|
Re: PO has me PO'd
Quote:
Think the smithsonian might want my panel box for a exhibit:lol: Funny, John and I were just talking about stopping up, but my family just had two deaths in a week, so it might be awhile Sorry for no updates, but parts wont be in till next week |
Re: PO has me PO'd
Jim, I'm sorry about the deaths in your family. that has a way of keeping things in perspective.
You're making slow and steady progress, that's a lot better than some of the rest of us. |
All times are GMT -4. The time now is 03:40 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com