Re: What did you do to your truck today? Chapter II
 

Tim's truck got a New set of Wheels, same as my Boss 338s. They look great on his Yellow machine. My truck got an LED brake light tail-light set-up, I like it.

Re: What did you do to your truck today? Chapter II
 

Hey where did you find the LED's? the center ones under the tailgate. Are they for a 67-72 are generic?:chevy:

Re: What did you do to your truck today? Chapter II
 

I installed the rear brake lines and hose.

I just took a knotted wheel on an angle grinder to the stock lines and they cleaned right up.

The new brake hose was bought at Napa.

http://i131.photobucket.com/albums/p...pso5xwisw8.jpg

Re: What did you do to your truck today? Chapter II
 

New pinion bearings, limited slip and new gears

Re: What did you do to your truck today? Chapter II
 

Changed up a few things over the last week. Installed my newly rechromed front and rear bumpers and added P01 wheel covers and Euro styled side markers. Had to small up the pics as they were cell phone pics.

Re: What did you do to your truck today? Chapter II
 

Andy, most of the typical truck parts suppliers stock them, I got mine from LMC I think it was like $60.00. They have the Red Only that does Tail-light, Turn indicators and Brake light in RED Only. And there's another model for the same price that also does White Back-up lights. The unit comes with Sticky Tape and a standard trailer wiring plug.

Re: What did you do to your truck today? Chapter II
 

Almost finished with the metal work on one side of my C50 rear fender flares. Now build supports for the second running board and start on the other side.

Re: What did you do to your truck today? Chapter II
 

Awesome, your truck is a beast!

Re: What did you do to your truck today? Chapter II
 

Just brought and fitted this sweet looking canopy for the truck

Re: What did you do to your truck today? Chapter II
 

went and started to price parts, battery, tires and rims, then trying to get the brakes to come back up, first time in many years, opened the hood, to see what was going on there, opened the air cleaner, wow mice bedding, nothing in the carb, will get battery and put some gas in her, and try to see if she will fire over, motor turned over by hand with hardly any drag, so here is hoping it will run

Re: What did you do to your truck today? Chapter II
 

I went to my local Junk Yard to look for 6 cylinder parts , found a few but still need a power steering pump with pulley for V - Belt , I know someone in So. Cal. has a 194 / 230 / 250 / 292 takeout engine lying there I'd like to buy it or some parts off it....

I'm getting antsy about getting my truck back to - gether .

I have WORK TO DO .

:chevy: .

Re: What did you do to your truck today? Chapter II
 

Very Nice. I am gonna steal that one.

Re: What did you do to your truck today? Chapter II
 

Tinted my back window

Re: What did you do to your truck today? Chapter II
 

Later on I went by NAPA and bought a cart load of engine gaskets and some torque converter bolts for the TH350 .

Am I supposed to use washers on these ? typ ? .

I really need some 6 cylinder parts and Andy in Riverside doesn't answer 'phone calls nor E-mails , who in So. Cal. has a take out engine ? .

I have a couple more pix to post but this junky old computer is so slow it'll choke and lock up instead of down loading them .

Next week I guess .

Re: What did you do to your truck today? Chapter II
 

Finished up the bazillion little spot welds (stich actually) across the back of the cab and front a pilliars where I R&R the roof and cab back.

Pics are from last week with it only tacked on but thought somebody might want to see em. Too tired to take any new ones today.

Re: What did you do to your truck today? Chapter II
 

That thing is insane... Those rear fenders will be the bee's knees. Still say big lug nut spikes will be awesome too... would love to see this in person when done.

Re: What did you do to your truck today? Chapter II
 

Got the buddies back from the blaster. Off to the upholstery shop Monday. :metal:

Re: What did you do to your truck today? Chapter II
 

removed the old engine , transmission, crossmember and installed the manual crossmember, new engine and bellhousing.

Re: What did you do to your truck today? Chapter II
 

got the new engine and trans in. have to find the right shifter or bend this one. and get the driveshaft shortened

Re: What did you do to your truck today? Chapter II
 

I replaced the rear tail light lenses, the housing buckets, the back-up lenses & housing buckets. And I also repaired the reverse light/neutral switch on the steering column. So now it won't start if it's in Reverse or Drive & now the back-up lights come on when shifted into "R". That was no easy job for a big guy like me. Those tiny screws that holds the switch onto the column can be trouble getting them back into their holes. And there is no room between that switch, the column & the firewall. It was a great day! (sarcasm) lol :metal:

Re: What did you do to your truck today? Chapter II
 

Pulled the old 283 out. Salvaged the flywheel, starter, and oil pan to reuse on the replacement.

Re: What did you do to your truck today? Chapter II
 

Made and installed an aluminum firewall harness/plug cover to match all my other fabricated looking things. Liking the exposed welds on my rad, rad over flow, washer over flow, valve covers. Making a custom alum scoop for carb next..

Re: What did you do to your truck today? Chapter II
 

Yesterday I installed a center seat belt and figured out why the fuel gauge reads empty all the time. The float is missing. time to order one of those.

Re: What did you do to your truck today? Chapter II
 

POR15 the cabin floor, added peal and stick, heat shield bubble wrap and jute padding. Used the original foam as a template. Was going to go MLV route but never got around to ordering.

Hope to take for a test drive tomorrow and see how effective it is.:metal:

Re: What did you do to your truck today? Chapter II
 

William got it looking good, is it ready for a cruise nite yet...I am ready when you are..

Re: What did you do to your truck today? Chapter II
 

Got a replacement fleetside long box today. The sides had already been removed. Gonna remove the back panel and wheelwells, and go to town with the wire wheel drill attachment. There's a few small dents and some surface rust on the floor. But, it's so far superior to my current bed (rust is pretty much the only thing holding it all together).

Tomorrow, gonna get the bed floor off the truck and find a place in the garage for it.

Re: What did you do to your truck today? Chapter II
 

Completed my suspension- CPP 5.5 up front and 7 in the back. 5 in spring and 2in block for the rear. 18X8 up front and 18x9 in rear.

Re: What did you do to your truck today? Chapter II
 

Did some finish wiring to the tail light circuit and following my engineer friends advice about never using slip connectors but solder all splices and use shrink tubing to prevent moisture from creating problems.Attachment 1364624

Attachment 1364625

Re: What did you do to your truck today? Chapter II
 

Did you already get yours back together & running? I went to Jumbo Joe's in mine yesterday while the weather was nice. I'm thinking of going to Sonic on Thurs about 6pm & see if any of the car gang shows up, it may still be to early in the season for them but it's suppose to be 70 degrees & windy thou.

Re: What did you do to your truck today? Chapter II
 

mine is running great, what sonic are you going to , ill try and be there.

Re: What did you do to your truck today? Chapter II
 

The one at 5802 64th St. Actually it's at the corner of S. Frankford & 64th Street.

Re: What did you do to your truck today? Chapter II
 

Installed new timing set

http://i1049.photobucket.com/albums/...pse3470051.jpg

Re: What did you do to your truck today? Chapter II
 

Fun. Fun. I love trying to get that timing cover lip over the oil pan (sarcasm).

Re: What did you do to your truck today? Chapter II
 

Polished the new radiator. Can’t wait to install it.

Re: What did you do to your truck today? Chapter II
 

Re: What did you do to your truck today? Chapter II
 

Installed my drop springs and before the new springs wheel well measured 33 7/8. After it measured 33 7/8. I was expecting more out of 2 inch drop springs. How long should it take to settle?

Re: What did you do to your truck today? Chapter II
 

Finally "finished" the column shortening and switching out Tom's amp:volt gauge kit. That part was a breeze. Works like a charm.

What *was* a PIA was the fact that the reverse/neutral switch wouldn't find a home on the tilt column where it would clear
the firewall clamps...whether I ran it inside of the cab or in the engine bay.

So, since I'd already used the M & H jumper on the neutral safety switch, I just wired in a toggle switch for the reverse lights and
put it in the e-brake cover.

Up:ON Down: OFF

Simple.

Re: What did you do to your truck today? Chapter II
 

well I bet you will miss that truck , I am glad we got to take them out for a cruise night a sonic before she left , cant wait to see the new project , let me know when you get it , I would love to see it ....... glad to know you and lets have another cruise nite when you get the next one going..... Don

Re: What did you do to your truck today? Chapter II
 

Pulled the cab up off the frame of the shortbed and suspended it so a body guy can come put it on his trailer and take it to his shop to repair the rot. Finally decided I am going to get some help at least on the cab to get the project moving faster. Wanted to do it myself but just can't get time on my side.

Re: What did you do to your truck today? Chapter II
 

Hey Don, yeah I miss driving it. That big block made a nice rumble in the neighborhood. Good to see you & the Mrs. & hope we can do a cruise next time when I get my next project done. I'm thinking this (see pic) may be my next project, a 1964 Chevelle Malibu SS. :metal: