Re: Do you need '64-'66 Chevy Truck Parts?
 

I have a painted complete grille assembly, including grille shell, bezels, rings, buckets, mounting brackets & harness. It is in very good condition, but will need to be painted, otherwise no dents or rust. It came from a '62 Chevy C60, so I think it is a little different than the light-duty, series 10, 20 & 30 truck grilles, but it is unique. I don't have any photos on my computer, but I can get some for you, if you are intersted.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I have several lower contol arms for the C10 but I don't think they are the same as used on the C20 trucks of the same year. Are you aware of that?

I may have some factory C20 lower "A" arms, but I will need to check.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Factory steel six lug rims are $25.00 each, plus $25 each for shipping, via UPS-Ground. At $200.00, you may want to find a set locally.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. A good, used factory gas gauge for a '65 Chevy C20 is $25.00, including shipping. It will have a clear face and good needle. It will work properly.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Thanks for the opportunity and please let me know if I can help.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hmmmm..... do you happen to have a good GMC Fleetside Tailgate? I'm looking for one for 58-59 but will take a 60-66 as well if need be. Thank you

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I have a very nice '60-'66 GMC fleetside tailgate. It is rust-free & dent-free, only surface blemishes. It is $300.00, plus $48.00 packaging & shipping.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Thanks for the opportunity and please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

How about a front sway bar and brackets?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Also, Im not sure what it is called but the bracket on the driver side frame rail that the clutch linkage connects to. Do you have one of those in good shape?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Mitch:

Thanks for the the inquiry. A good, used factory front sway bar (original on C20), including rame mounting mounting brackets, bushings and mounting hardware is $125.00, plus $28.00 shipping.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good afternoon and thanks for the inquiry. It is called a "Z" bar frame mounting bracket. Do you have the ball stud for the engine block? Do you have the "Z" bar, the ball stud & hardware to mount to this bracket? If not, I have these items, as well.

A "Z" bar frame mounting bracket is $22.00, including shipping.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Thanks for the opportunity and please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Deee-lux!!!!

Re: Do you need '64-'66 Chevy Truck Parts?
 

Yo cowboy, what parts do you need?

Underhood box
Heater core
Fan motor & squirrel cage blower
Underdash box
Dash controls with levers, knobs & cables

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have any coil swb frames? If so how much?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have stepside tail light and possibly back up light lenses?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I have four swb rollers. They are all trailing arm/coil spring rears & coil spring front. They are all '63-'66 Chevy chassis and they are complete, minus the engine & transmission.

They are $500.00 each, picked up at my shop in Kansas City, KS. Let me know your thoughts and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I have a good, used pair of stepside taillights and a good, used pair of stepside reverse light lenses. $40.00, including shipping. I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net Let me know if I can help you with these items or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I need the whole nine yards. Keep in mind that this truck came from the factory with no heater, so I really can't tell by looking at it what I need. I didn't think you could buy one without a HEATER!

Re: Do you need '64-'66 Chevy Truck Parts?
 

1965Cowboy:

Is it possible to send me a picture of the dash and the underhood area at the heater? These trucks had a Deluxe-Air (3-lever dash control) or Thrift-Air (single pull knob dash contol), so it is your choice on which one to use. I have the complete assembly for both, including the dash controls, underdash box, underhood box, heater core & fan blower. With either set-up, you will need to run a supply and return hose to the water pump & intake to circulate coolant. I can provide the hoses and threaded connectors, as well, if you need these items.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I'll send you a picture tomorrow. thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony,
Do you have the taillight bezels and the light housings for a fleetside? I have a set of lenses, but I need the housing and bezel to go with them. Also, how about battery tie downs?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Yes and yes. Do you also need the factory bucket screws and the factory lense screws?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Yes, I could use the screws as well. What would the price be on the tail light items?

Re: Do you need '64-'66 Chevy Truck Parts?
 

PM sent. Please let me know if I can help and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey lil red, wondering if you sent my tank straps yet, 'cause i need the tank rubber filler neck too. let me know how much and if you have to ship it separate.

Re: Do you need '64-'66 Chevy Truck Parts?
 

looking for a 456 grill plain no crome does not have to be perfict oh and squrl cadge for heater fan 64 delux heater shiped to 97501