Re: Markeb01 Build Thread
 

Mark, that interior is just :jdp:

Re: Markeb01 Build Thread
 

:agree:

Re: Markeb01 Build Thread
 

Thanks guys! Can't wait for the new seat covers to show up. They should really tie everything together. In addition to being a similar style, the color and texture will also match.

Looking forward to a little warmer weather to go for a drive. Currently it's down to 2-5 degrees overnight with highs in the teens -low 20's.

Yesterday I went to Harbor Freight and bought one of these tank mounted heaters for the garage:

http://imageshack.us/a/img842/7382/te59.jpg

My old little heater could go through a couple of bottles and only raise the temp in the garage 5-6 degrees. The new one looks a little scary but is simple and easy to operate. This thing brought it up from 40 degrees to 60 degrees in about an hour, on medium! Man that was nice.

And a big thank you to forum member 1966chevy for giving me the idea to attempt this project:

http://imageshack.us/a/img42/9801/ejv0.jpg

One note for anyone else with interest in full size door panels – the 64-66 doors aren’t anything like the 60-63 versions in the door panel area. The 60-63’s require much more spacing in the upper rear and along the top than the 64-66’s. Full size door panels on a 64-66 would be a much simpler task.

Re: Markeb01 Build Thread
 

that looks cool mark

Re: Markeb01 Build Thread
 

I forgot the upholstery over the transmission tunnel, so that was completed today. I was never happy with the previous droopy shape, so the backing was modified to provide a straight line across the bottom. The previous shape was created to cover all the bare spots not covered by the factory floor mat. The new MIP vinyl floor mat covers everything so the dips were no longer needed. Here’s the previous rendition:

http://imageshack.us/a/img194/963/wpli.jpg

And here’s how it looks as of today:

http://imageshack.us/a/img809/4738/cnje.jpg

Ruthann really wanted to go for a ride in spite of the 15 degree temperatures, so we bundled up and hit the road. Conditions were clear and dry with light traffic so I opened the pipes half way and captured a short video. Every time I’ve tried with the cutouts wide open the deep sound overwhelms the microphone and just sounds like the engine is cutting out. This time it came out pretty decent and sounds great on the stereo.

Interestingly the new door panels dampened the sound level in the cab significantly. The engine sounds like I added a closed element air cleaner, and the half open cutouts were barely detectable at idle on the video camera unless under acceleration. Also conversations are now easy without needing to yell to be understood.

I didn’t really expect any change at all since the only real change was the full height upholstered door panels. Everything else is the same – the thickness and density of the foam padding, brand and type of Naugahyde, etc. Now it sounds like a Buick (well sort of) cruising down the street. The gear drive still sings right along though.

Here’s a link to the latest video. I think the sound is the most realistic I’ve been able to capture so far. I’m hoping a GoPro (on the list for next year) will allow recording full throttle open cutouts.

http://www.youtube.com/watch?v=7z4cO...ature=youtu.be

Re: Markeb01 Build Thread
 

Sounds really nice & healthy, Mark! I'm sure it felt good to take it for a spin, even if it was cold. Interesting thing about the added sound deadening you got, courtesy of the new upholstery.

Re: Markeb01 Build Thread
 

I like straight line over transmission tunnel better. Acoustics on the youtube video are great, looks like a fun truck to drive. Surprising results, never thought that sound deadening the doors would make that much difference as it is mostly overlooked or even mentioned.

Re: Markeb01 Build Thread
 

Great job on the interior, Mark. I can't wait to see it in person. Maybe by next summer my '64' will be done and driveable again. Spokane is always a nice day or weekend trip for us. Keep warm!

Re: Markeb01 Build Thread
 

Mark always love your videos. Makes me want to put a manual in my truck someday.

Bret

Re: Markeb01 Build Thread
 

Awesome Sound!!!:metal:
Thanks for the ride-along...:mm:

Really like the take-off after the left turn...:burnout:

Re: Markeb01 Build Thread
 

Thanks for all the feedback guys. It's getting so cold (0-10 degrees) I'm losing my enthusiasm for being in the garage. So while thinking about getting back to modeling, I stopped by the toy section of Walmart this morning. I was surprised to find a pile of these and had to have one. They’ve never carried this series at the local store before. Must be loading up for Christmas:

http://imageshack.us/a/img819/4812/9d3z.jpg

I also picked this one up at a different Walmart a couple of weeks ago. It’s Hot Wheel size and claimed to be a 1958 GMC, but it has single headlights, a funky plastic grille that doesn’t look like anything and an odd front bumper that looks similar to the one found on a 1950 Dodge. It also has wheel tubs! I haven’t decided yet whether to leave it alone or cut it up and turn it into a 1960-66 short step:

http://imageshack.us/a/img850/121/9wce.jpg

http://imageshack.us/a/img69/2651/9a2d.jpg

http://imageshack.us/a/img703/258/0ji0.jpg

Re: Markeb01 Build Thread
 

Actually a certain type of GMC had that grill and bumper and single headlights...I'll take a picture of the ones in my book. here is a picture...they were produced in that style...guess not many were made. lol! Dang thing!!! Sorry the picture came out sideways, but you get the idea.

Re: Markeb01 Build Thread
 

Wow great call! In all my years I’ve never seen a GMC with that appearance. However seeing is believing:

http://img577.imageshack.us/img577/7109/tiv8.jpg

Thanks for sharing that input.

Re: Markeb01 Build Thread
 

These were made in 1958-1959(?). Known as the Series 101 6.5 footers. Gmc had a billion names for their trucks. Even a different color had a different number! LOL!

Re: Markeb01 Build Thread
 

Cool score on the die cast '66. My dad got one at Walmart as well & showed me when I was home in Sept. I think he got a blue one. Guess I should look for one for myself. :lol:

Re: Markeb01 Build Thread
 

Haven't had much luck at the Walmart around here with finding the truck camper combo... Did find it on Amazon for $34.99 ;)

Hey Mark... do you buy any scale lumber for buildimg dioramas? If so, where is a good source? Thanks in advance!:mm:

Re: Markeb01 Build Thread
 

Hi Don, here’s a long answer to a short question. The only wood in my dioramas is in the cabinet, floor/street, and the sidewalks. All of that was purchased at Lowe’s or Home Depot. 99% of all of the construction materials used to produce the buildings are styrene plastic.

It’s all sheet, strip, and rod stock. The other 1% is machined aluminum, and the finials on top of the right hand building are wood. I’ll refer to some photos of my Universal Set diorama to explain where the different materials were used. I find plastic is easier to work with than wood, can be finished to exact dimensions, and holds up much better to handling and can survive in outdoor applications. Structures can be made very heavy, and remain strong enough for repeated handling. I include a built in handle in most of my buildings as they sometimes need to be removed to replace light bulbs, change wiring layouts, or perform upgrades. Styrene tube glue can be used, but for structures it’s easiest to use liquid cement. Buying the first bottle at a hobby shop is a good idea to obtain the small bottle with a brush in the cap. The truth is, the contents of the bottle are nothing but Acetone. So for the cost of the hobby bottle, just pick up a quart of Acetone at the hardware store and you’ll have a lifetime supply for very little investment.

Generally I start out with an exact size two dimensional drawing on foam filled paper found at art stores like Michaels. It is the material photo framing outfits use to support the photograph to be framed. Here’s an example of building #1 at stage 1:

http://imageshack.us/a/img811/1227/x0d6.jpg

Once everything fits and looks accurate, I transfer the drawings to ½” styrene foam filled sheet. Here’s one of the earliest photos I have showing the openings for the toy and camera stores cut out:

http://imageshack.us/a/img202/5244/fvln.jpg

This is a one piece product that is actually two thin sheets of styrene held together with styrene foam. It works great for substructures, minimizing the need for framing as on a real building.

I bought this material and most of the plastic supplies online from Plastruct or Evergreen:

http://www.plastruct.com/Pages/Catalog.html

http://www.evergreenscalemodels.com/

If you choose to work with plastics, do yourself a favor and get their catalogs. It makes it much easier to find what you’re looking for online.

Once the structure has been glued together, I simply apply surface materials on top. For example the bricks are imprinted sheet, but the bay window was built like full size construction. It’s all mitered 2x4’s, plywood & moulding (to scale). The small window next to the bay window has yet to be cut and installed:

http://imageshack.us/a/img571/6809/rp2w.jpg

To show the full scope of the set, here are all 3 buildings early in the project. The partially completed building on the right was a model railroad kit that turned out too small for accuracy. It was replaced with a custom build to match the real set:

http://imageshack.us/a/img28/8123/t1nm.jpg

This shows the upper works installed on the styrene structure. The lower portion is the paper drawing which kept getting cut down as production progressed:

http://imageshack.us/a/img855/8410/aegr.jpg

With most of building #1 & #2 completed, building 3 started over:

http://imageshack.us/a/img209/6121/endl.jpg

Here’s building #3 completed.

http://imageshack.us/a/img706/7372/1pbx.jpg

The 4 vertical columns have flutes cut into them, so these were machined for accuracy. Same thing with the bases for the pharmacy. They were sliced from aluminum which allowed hogging out the front creating a cavity for the screened air vents. The four roof turrets were each formed from two pieces to adjust the depth of the face recess. After a year of trying to come up with a solution, the domed window openings were finally created by slicing ABS sewer pipe in half.

And finally the awning over the camera store was created by building a conventional frame with plastic (similar to a real awning), and was covered with tissue paper coated with thinned white glue. The street lamps are genuine Lionel train parts with pearl painted clear plastic balls on top:

http://imageshack.us/a/img209/4359/i09d.jpg

http://imageshack.us/a/img31/4195/wumt.jpg

Re: Markeb01 Build Thread
 

Thanks for the info… :metal:
Just now getting into the planning stages for one I want to do...:mm:

Merry Christmas to You and the Missus!!!:ennyd:

Re: Markeb01 Build Thread
 

Thanks and return wishes to you & those close to you. Our oldest daughter will be visiting for a week. Her career has turned her into a world traveler, so this is a rare treat for us. We're both looking forward to some quality 1 on 1 time.

Re: Markeb01 Build Thread
 

Now I am wondering if I should build a diorama too....

Your work really is inspiring Mark.

Thanks for sharing.

Re: Markeb01 Build Thread
 

Awesome Diorama Mark. You have mad skills. Love the 59' El Camino. What model kit is the white truck in the last pic? Makes me want to build some of my 60's pickup kits.

Bret

Re: Markeb01 Build Thread
 

Thanks guys for the comments and stopping by.

Bret, the Chevy truck is a 1961 annual. It was either made by AMT or SMP and is a long bed fleetside. It is very similar to the “promo” trucks that were offered by dealers. The annuals were unassembled in kit form with a few extra pieces thrown in and sold through hobby shops and toy stores.

The biggest difference was the early promotional cars and trucks were produced of some type of acetate material which normally warped badly over time. The kit versions were produced in styrene plastic which did not warp. Here’s what mine looked like when I found it on Ebay:

http://imageshack.us/a/img34/8519/nx99.jpg

http://imageshack.us/a/img11/6602/bge4.jpg

http://imageshack.us/a/img440/2376/ju45.jpg

And here’s what it looks like after some Bare Foil trim, 55 Chevy wheel covers and a new set of whitewalls:

http://imageshack.us/a/img24/7706/puxo.jpg

The original 60-66 trucks are frequently listed on Ebay, but it’s hard to find a decent example at a reasonable price. They seem to be in one of two conditions – new old stock unbuilt in the box, or something that looks like these:

http://imageshack.us/a/img209/2374/7tws.jpg

http://imageshack.us/a/img706/5343/ybs6.jpg

http://imageshack.us/a/img38/2495/mtqd.jpg

http://imageshack.us/a/img811/5733/1d4p.jpg

http://imageshack.us/a/img17/4008/vlj1.jpg

http://imageshack.us/a/img31/5180/ntcz.jpg

It’s easy to understand why so many were built in nearly identical fashion. Most were assembled by 10-12 year old male baby boomers (like me) that didn’t know anything about real car/truck styling. There was no understanding that all the extra parts were included for “personalization”, so most kids slapped on every part that came in the kit.

I was extremely lucky and found one that was adult built as bone stock. The only defects were the driver side tires and one of the valve covers was missing. There was no damage or glue marks. I was also fortunate it was a holiday weekend or something and nobody else bothered to bid on it, so I picked it up for something like $50. Unbuilt in an original box these normally go for $75-$150 or more. So it just takes persistence to find one. I am not aware of any currently produced kits that offer a long bed in the 60-66 series.

Several years ago Modelhaus offered full resin replicas of these kits, but the tools wore out and they aren’t interested in building new ones. They do however offer many of the pieces like bumpers, grilles, dashboards, hoods, glass, etc.

http://www.modelhaus.com/

Re: Markeb01 Build Thread
 

Thanks again for the info, was re-reading and realized I had somehow overlooked the Links... Thanks Mark, and I must agree with the above statements pertaining to the Amazing work you do!:metal:

Re: Markeb01 Build Thread
 

Thanks again for the compliments. I’ve never seen my skills or abilities anything special, but I do have a Jarhead mentality and I never give up just because something is impossible!

This being the first winter with my new engine, I’ve discovered it dislikes cold weather even more than my old engine. With the old engine, adding an electric fuel pump to fill the lines and carburetor bowls before cranking really helped get it started. With the new engine, as the ambient dropped to near zero I actually ran the battery dead a few times and never got the engine started. And this is inside a reasonably warm garage. I can’t tolerate undependable vehicles. It frustrates me beyond reason because it could result in a life threatening situation if a vehicle can’t be started when needed.

So I resorted to good old starting fluid and it fired up instantly. Remembering the Ether Start kits I bought for new Peterbilts back in the 70’s, I considered installing one on the truck for easy winter start ups. Problem being they cost anywhere from $100-200 (or more) with the ether bottle. They are also ugly and need to be mounted vertically which would be a problem in my open engine compartment.

A lot of guys just spray starting fluid through their open element air cleaners, but I’m concerned what effect this might have on the filter element over time, and what problems might occur if too much explosive vapor collects above the throttle plates.

So this afternoon I developed my own “Poor Man’s Ether Start Kit”. I simply added a conveniently shaped pipe to the front of my carburetor with a cap on top:

http://img18.imageshack.us/img18/7579/6w40.jpg

http://imageshack.us/a/img29/7716/h1me.jpg

http://imageshack.us/a/img843/1672/9ls4.jpg

I also modified the can of starting fluid I had by removing the conventional spray nozzle and replacing it with one that has a “straw” attached.

So now I have a new routine – pull the cheap float battery charger (it keeps the battery topped off), pull the cap off the new pipe and inject the starter fluid, replace the cap, climb in, set the choke per usual and fire it up! It seems like the engine doesn’t even get to fully turn over before it jumps to life. This small project cost exactly nothing and eliminates pulling the air cleaner to squirt the juice directly into the carb, and the ether enters the manifold below the throttle plates.

Once the engine has come up to operating temperature, I don’t need any of this as long as it’s driven every day. But over the winter seasons, it sometimes sits for weeks without being used. The pipe is ugly and looks stupid so it will probably come off during the car show months, but in the meantime it sure is handy and effective.

Re: Markeb01 Build Thread
 

Not sure I would pull it off....certainly a conversation starter with someone sharp enough to spot it, and ask its purpose.

See, I learned something totally unexpected today.
Thems is the best kind a lernin.... :metal: