The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

old cruiser 04-05-2010 07:11 PM

Re: What did you do to your truck today?
 
Lakeroadster , nice work on grill looks great

markeb01 04-05-2010 09:47 PM

Re: What did you do to your truck today?
 
Going to be driving in the rain at night for a bit, so went out and coated the windshield with Rain-X. Makes a world of difference in these old trucks with marginal wipers.

kdrodworks316 04-05-2010 09:57 PM

Re: What did you do to your truck today?
 
I looked out the window at my busted A$$ burban sitting out in the snow, does that count as doing something to my truck?

Sillyoldman 04-05-2010 10:03 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by lakeroadster (Post 3902624)
68-69 Camaro SS louvers.

Cool. I like it.

Franks Fab Shop 04-06-2010 01:21 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
reomoved old tired motor and put in a runner today.
tomorrow trans, lines ,wires,etc... this is pic of old one

markeb01 04-10-2010 01:39 AM

Re: What did you do to your truck today?
 
Using the Van Pershing Idea Page how to article (thank you Persh!), I installed door jamb switches tonight to operate the dome light when the doors open. Here's the link for anyone interested:

http://www.persh.org/pickup/DomeLight.htm

It's relatively simple, and thankfully the switch part number SW98 was included, because everything else I looked at was too short to bridge the gap between the door and the jamb. Autozone was the only place I could find them, and they remain $1.99 each.

I'll get the wires tied in to the dome harness tomorrow, and I'm also going to be ordering one of the clear dome lenses from LMC. I'll post night time before and after photos of the light output once I have the new lens, if there's enough improvement to be seen in a photograph.

thunder71 04-10-2010 06:00 AM

Re: What did you do to your truck today?
 
mark, link not working:uhmk:

markeb01 04-10-2010 11:07 AM

Re: What did you do to your truck today?
 
The link is good, it's just offline at the moment. He must have very poor server support, about every other time I try one of his links the site is down. If history repeats itself the link should be working again in a few hours.

markeb01 04-10-2010 06:00 PM

Re: What did you do to your truck today?
 
Got the dome lights wired up to the door switches, and installed a toggle switch to kill the circuit should we want to sit in the summer heat with the doors open. Also installed a glove box light, primarily for the spring which helps pop the glove box door open. Apparently Chevys had a hinge spring, but I don't believe these were offered on GMC's (at least I've never seen one). Also included a toggle switch to shut off the glove box light for those evenings when we're out on a date, and use the inside of the glove box door for a food and drink tray.

I also just checked the Persh link and it's still offline. His information is helpful, but the server support he gets can be a little frustrating.

cb1965 04-10-2010 06:18 PM

Re: What did you do to your truck today?
 
did a crossmember swap thursday and friday
old.
http://i848.photobucket.com/albums/a...project049.jpg

http://i848.photobucket.com/albums/a...project060.jpg

new.http://i848.photobucket.com/albums/a...project065.jpg

http://i848.photobucket.com/albums/a...project069.jpg

javadoc 04-10-2010 07:40 PM

Re: What did you do to your truck today?
 
Nothing big. Took it out of the garage for the first time in 6 or 7 months. It started right up, gotta love that!

ruffrida2005 04-10-2010 09:42 PM

Re: What did you do to your truck today?
 
CB1965 like your roll around dolly.

I didn't work on the truck, but I got my band saw set up so I can start building the rest of the tubes for my 4 link.

aerotruk63 04-11-2010 01:22 PM

Re: What did you do to your truck today?
 
Continuing with the conversion from 17.5 x 5.25" original wheel to 17" x 6" for the 1963/64 K10 project.


http://lh4.ggpht.com/_jlNKkl-rSbc/S8...0/DCP00956.JPG

Byronic 04-11-2010 09:44 PM

Re: What did you do to your truck today?
 
Took her out on a date and picked up some ice cream. Lots of thumbs up toolin down the raod.:metal:

markeb01 04-11-2010 10:22 PM

Re: What did you do to your truck today?
 
Funny thing about the thumbs up/attention these trucks draw. Took my wife out for a lunch date Friday and while parked overlooking a left turn lane, we kept getting eyeballed along with many smiles. It got a little scary however when the guy in the 64 Dodge truck kept staring at our truck while moving forward in traffic. Suddenly the cars in front of him stopped, and he didn't. He was busy looking backward over his shoulder out the window, slamming on the brakes at the last second hard enough to kill the engine and came to rest about .050" behind the Mercedes in front of him!

I'm thinking maybe next time I better park on the other side away from facing traffic! :lol:

Carlsoti 04-11-2010 10:30 PM

Re: What did you do to your truck today?
 
I turned a few wrenches today. Mostly I cussed at the truck, damned the guy I bought it from, and berated myself for not getting rid of it sooner. I've decided that it's going to the mech-neck tomorrow. I'm tired of futzing with it.

NF65Fleetside 04-12-2010 10:38 AM

Re: What did you do to your truck today?
 
finally got a set of rallys for the truck, could only afford 2 tires so I got a pair of Falken 225/60/15's and swapped out the beat trailor wheels in the rear for the new shoes. Lol theres nothing like having good traction and piece of mind! lol

jbgroby 04-12-2010 01:41 PM

Re: What did you do to your truck today?
 
Cb1965

That's got to a new one for a skateboard use? ;)

Slow Build 04-12-2010 06:57 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jbgroby (Post 3915699)
Cb1965

That's got to a new one for a skateboard use? ;)

Hangin Six.

cb1965 04-12-2010 07:24 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jbgroby (Post 3915699)
Cb1965

That's got to a new one for a skateboard use? ;)

The board was just laying there while im breaking my back dragging this hunk of iron across the driveway.:banghead: lightbulb moment, get the board!!

Rhoff2009 04-12-2010 07:28 PM

Re: What did you do to your truck today?
 
Filled a 30 gal trash back with dirt/grease/wasp nest etc. that I pulled out of the front crossmember on my 66

steveb64 04-12-2010 10:40 PM

Re: What did you do to your truck today?
 
3 Attachment(s)
Took the head off to take care of a head gasket leak and to clean up the head, runs alot better now.
Getting it ready for the Torque Fest in Farley, Iowa on May 1st.
vintagetorquefest.com

dragn91 04-12-2010 10:47 PM

Re: What did you do to your truck today?
 
i drove my 66 to work so i could spend the rest of the day after work cruzeing around the back roads in it. even found a cool old exxon gas station metal sign off in the woods i brought home to hang in my shed.

sams60gmc 04-12-2010 10:57 PM

Re: What did you do to your truck today?
 
nice I always used a skateboard as a dolly

panelrodder81 04-12-2010 11:03 PM

Re: What did you do to your truck today?
 
Wait, you did this swap over the weekend with the dog house and motor still in/on the truck??!!?? Um... will you fly out and do mine too! I want to do this swap but I can't fathom how it can be done over the weekend, what did you do to prepare for that tight time line? I drive my truck daily and after have done a motor swap recently my wife won't be to please if I have to decommission it for more than a weekend again.


All times are GMT -4. The time now is 10:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com