The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

Dan in Pasadena 03-17-2013 10:50 PM

Re: What Did You Do With Your Truck Today ?
 
Took all damn day just to do these few things:

"BEFORE" condition:
http://i832.photobucket.com/albums/z...pse880b487.jpg

AFTER :
http://i832.photobucket.com/albums/z...psab7e89d2.jpg[/

Dan in Pasadena 03-17-2013 10:53 PM

Re: What Did You Do With Your Truck Today ?
 
BEFORE:
http://i832.photobucket.com/albums/z...psfccadd7a.jpg

AFTER:
http://i832.photobucket.com/albums/z...ps76a8a26d.jpg

Heavy "pecks" under the eyebrow of the ring visible in this pic:
http://i832.photobucket.com/albums/z...ps94610df1.jpg

mark '87 930 03-18-2013 07:47 AM

Re: What Did You Do With Your Truck Today ?
 
How did you do that Dan?

Nordic 03-18-2013 08:31 AM

Re: What Did You Do With Your Truck Today ?
 
Finally got heater and windshield wiper motor installed .Nice to have heat/defrosters.

Highsider 03-18-2013 09:14 AM

Re: What Did You Do With Your Truck Today ?
 
I forgot, last week I did about the same things as Dan.

Even put in new stainless screws to hold it all in.
Added new NAPA 7" halogen bulbs and a SpeedWay.com headlight relay kit.

Also, installed a cooling fan manual dash switch and fan relay kit.

So, yes Dan...how did you achieve the "new" look for the chrome rings?

hsdropout 03-18-2013 12:11 PM

Re: What Did You Do With Your Truck Today ?
 
4 Attachment(s)
Finally got all paint & clear coat done on sheet metal. Still alot to be done but getting the paint done is major. Black base coat/satin clear.
Time to start assembly.

hotrod1 03-18-2013 12:15 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by hsdropout (Post 5954768)
Finally got all paint & clear coat done on sheet metal. Still alot to be done but getting the paint done is major. Black base coat/satin clear.
Time to start assembly.

Looks good. What kind of paint did you use?

Can you please tell us about the booth you constructed. I see a fan, did you use two? Can u post more pics of the booth?

Dan in Pasadena 03-18-2013 12:41 PM

Re: What Did You Do With Your Truck Today ?
 
;)
Quote:

Originally Posted by mark '87 930 (Post 5954338)
How did you do that Dan?

?? How'd I do what? The headlight buckets or the chrome?

On the buckets: 1st I washed them with degreaser and a scrub brush, then used a wire wheel on my bench grinder to remove rust & some undercoating a previous owner got on them. Then I used Rustoleum red oxide primer and after it flashed I used their Professional grade semi gloss black.

Headlight bezels got polished with Turtle wax chrome polish and OOO Steel wool.
Posted via Mobile Device

Dan in Pasadena 03-18-2013 12:43 PM

Re: What Did You Do With Your Truck Today ?
 
By the way, on my iPhone (I'm posting from it now) the photos all show as being upside down! But last night on my laptop they were correct. What are you guys seeing?
Posted via Mobile Device

Dan in Pasadena 03-18-2013 12:46 PM

Re: What Did You Do With Your Truck Today ?
 
My stuff is small potatoes;

hsdropout, your paint is NOT "small potatoes". It looks really good. Are you an experienced painter? I'd really like to see details on your home built booth too and any info on the paint, you used, HVLP (I assume) tip size, etc?
Posted via Mobile Device

dubie 03-18-2013 12:58 PM

Re: What Did You Do With Your Truck Today ?
 
i gutted all the old wiring out of the cab, which was a good thing. I found 14 splices and the ignition switch has 10 leads coming off of it, what a mess. I also patched up a couple spots on the floor and took a wire wheel to the rest of the can floor so I can prep it for coating and then sound deadener. My Rebel Wiring harness has shown up so I can start the task of mounting the fuse panel and running wires to their new home.

Dan in Pasadena 03-18-2013 02:20 PM

Re: What Did You Do With Your Truck Today ?
 
Sounds like a nest of snakes you had there. You got a LOT of work done.
Posted via Mobile Device

dubie 03-18-2013 02:32 PM

Re: What Did You Do With Your Truck Today ?
 
I'm motivated to have this thing running and driving this summer, so I need to haul some serious ass on it. I'll snap a picture of the wiring after I removed it, I've never seen such a hacked up amount of wires.

Highsider 03-18-2013 02:49 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 5954825)
;)

?? How'd I do what? The headlight buckets or the chrome?

On the buckets: 1st I washed them with degreaser and a scrub brush, then used a wire wheel on my bench grinder to remove rust & some undercoating a previous owner got on them. Then I used Rustoleum red oxide primer and after it flashed I used their Professional grade semi gloss black.

Headlight bezels got polished with Turtle wax chrome polish and OOO Steel wool.
Posted via Mobile Device

Getting the "bubbles" out of the chrome is what I needed help on. I will try the 000 steel wool.
I still have a couple of cans of the TW chrome polish from the seventies!

Photos show correctly.
Thanks, Dan.

dubie 03-18-2013 02:52 PM

Re: What Did You Do With Your Truck Today ?
 
the steel wool works like a hot damn on the chrome, just don't use it on stainless. It doesn't work so well hahahha I used the 000 steel wool and some NevrDull on the few chrome pieces on my 56 and it shined right up

Dan in Pasadena 03-18-2013 05:26 PM

Re: What Did You Do With Your Truck Today ?
 
Unfortunately nothing I know of fixes chrome zits except money, great amounts of money. Lol.
Posted via Mobile Device

Dan in Pasadena 03-18-2013 05:32 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by dubie (Post 5955053)
...I've never seen such a hacked up amount of wires.

I admit to having occasionally done work on a car that I wasn't very proud of, for various reasons. But for the life of me, I've never understood how guys will do work that is not only lame, but DANGEROUS!

I like myself too much to take a chance on burning myself or my ride to the ground!
Posted via Mobile Device

waybad 03-18-2013 06:34 PM

Re: What Did You Do With Your Truck Today ?
 
pulled out the heater core,, 180.00 bucks just to keep warm...................

buggy5872 03-18-2013 07:52 PM

Re: What Did You Do With Your Truck Today ?
 
My oldest son turned 10 the other day and tonight he helped me disassemble the carb off my 59. He was so excited. I loosened the screws and then let him take them all out. I'm not sure if he was more amused with the tools, carb or the magnetic tray that he made every screw stand up in. Probably the magnetic tray. It's soaking over night and tomorrow he will get to help put it back together. I'm glad he is finally old enough to help out. He did do some welding last winter on Big Bertha. Mom was not amused though. She worries too much.

Dan in Pasadena 03-18-2013 09:54 PM

Re: What Did You Do With Your Truck Today ?
 
Better YOU teach him and teach him how to take proper precautions than for him to learn it elsewhere. No one will EVER be more careful with him than his own father.

Some of my very earliest memories are "helping" my dad swap a 283 into his '59 long Fleetside. And later swapping that out for a 348.

Good on you!
Posted via Mobile Device

G&R's57GMC 03-18-2013 09:57 PM

Re: What Did You Do With Your Truck Today ?
 
5 Attachment(s)
My '56 needed something to set it off, give it a theme.

So I added the Texaco logos to the doors and aged them to the patina.

Dan in Pasadena 03-18-2013 10:19 PM

Re: What Did You Do With Your Truck Today ?
 
How'd you do it? You're not a pro painter are you?
Posted via Mobile Device

G&R's57GMC 03-18-2013 10:53 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 5956071)
How'd you do it? You're not a pro painter are you?
Posted via Mobile Device

Whoops! Did I say I did that ?

Well I created the concept for the design, conveyed that to my sign guy and $200 and a few hours today and voila.

Dan in Pasadena 03-18-2013 10:56 PM

Re: What Did You Do With Your Truck Today ?
 
Ahhhh, the all important secret ingredient: $200!

hsdropout 03-18-2013 11:49 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Hotrod1 & Dan, the paint booth is just a 10 x 10 EZ-up on a tarp, with plastic sheeting walls, then a simple 2x frame to support the lights, a rain tarp over top. One small box fan and a filter opening opposite side....fairly simple but works. ZipperWalls from HD work good for opening in plastic...stick on, cut and instant zippered opening
I had no previous experience, just did a lot of reading. Trick is to get gun adjusted properly. HF HVLP $7 gun, used 1 for primer and 1 for finish,.1.3 tip., inexpensive paint $100 +/- per gal kit. Gal kit makes about 1.5 gal. Lots of sand paper (80 to 600 grit) some filler (most ended up on floor).
Like they say it's all in the prep & an incredible amount of moving parts around. Cab, bed, tailgate, steppers, 2 rear fenders, 2 front fenders, hood, cowl, facsia.......what did I miss?
It is an incredible pain in the a$$, in case you are thinking of doing it......
I now know why they charge so much.

hotrod1 03-19-2013 12:45 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by hsdropout (Post 5956323)
Hotrod1 & Dan, the paint booth is just a 10 x 10 EZ-up on a tarp, with plastic sheeting walls, then a simple 2x frame to support the lights, a rain tarp over top. One small box fan and a filter opening opposite side....fairly simple but works. ZipperWalls from HD work good for opening in plastic...stick on, cut and instant zippered opening
I had no previous experience, just did a lot of reading. Trick is to get gun adjusted properly. HF HVLP $7 gun, used 1 for primer and 1 for finish,.1.3 tip., inexpensive paint $100 +/- per gal kit. Gal kit makes about 1.5 gal. Lots of sand paper (80 to 600 grit) some filler (most ended up on floor).
Like they say it's all in the prep & an incredible amount of moving parts around. Cab, bed, tailgate, steppers, 2 rear fenders, 2 front fenders, hood, cowl, facsia.......what did I miss?
It is an incredible pain in the a$$, in case you are thinking of doing it......
I now know why they charge so much.

HSDROPOUT: That looks great! Is there any one site that you can remember that goes over this in detail? I am impressed!

Amorget 03-19-2013 02:30 AM

Re: What Did You Do With Your Truck Today ?
 
Not 47-59 related directly, but pulled the 1996 Chevy 2500 w/ a 350 Vortec motor out of the garage for the first time under its own power and drove it around the private road we live on. Truck is amazingly quiet, hard to even tell it is running. We replaced the motor with one from the junk yard and overall it went amazingly well.

Frees up a bay (and time) to get back to work on the 57.

Highsider 03-19-2013 07:58 AM

Re: What Did You Do With Your Truck Today ?
 
Cool way to do a booth!
Thanks for the photo, too.

hsdropout 03-19-2013 10:29 AM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
Hotrod, autobody101 forums has alot of good info and helpful people for bodywork, painting, etc.
I want to eventually do some old school flames on front and multi colored pinstripes,
Flames: fade from white, yellow orange to red
Pinstripes red, gold & lime green, not particularily in that order.





I did get straight "A"s in art and auto shop.

crossfire84 03-22-2013 04:57 PM

Re: What Did You Do With Your Truck Today ?
 
My new booster and master cylinder came today.

G&R's57GMC 03-22-2013 05:01 PM

Re: What Did You Do With Your Truck Today ?
 
Engine & Trans cross members came today from Brothers.

hsdropout 03-22-2013 05:12 PM

Re: What Did You Do With Your Truck Today ?
 
I flipped my "nitro slammer" shocks over the way they are supposed to be.....
Thanks to Dubie, Sqrints and all who pointed out that I had them installed upside down. DOH!

waybad 03-22-2013 05:59 PM

Re: What Did You Do With Your Truck Today ?
 
replaced the heater core,, installed led taillights, new inside wiper arm, licenses plate light..

lazypineapple 03-22-2013 09:13 PM

Re: What Did You Do With Your Truck Today ?
 
Weighed my truck , 1952 Chevy 350SBC/700r4
3170 lb
I think its a little Lite, only have a 1/2 plywood for the bed, no a/c

http://67-72chevytrucks.com/gallery/...ightscales.jpg

broey 03-22-2013 09:16 PM

Re: What Did You Do With Your Truck Today ?
 
techincally didnt do anything yet. but I got these from a friend for my fleet. not sure about them yet. they look good on delmos truck though.

http://i10.photobucket.com/albums/a1...ps2ac3374c.jpg

Dan in Pasadena 03-22-2013 10:28 PM

Re: What Did You Do With Your Truck Today ?
 
Continued from posts #1782, 87 and 1801:

BEFORE (as a reminder):
http://i832.photobucket.com/albums/z...psab6135bf.jpg

AFTER today's shopping at The Truck Shop in Orange, CA:
http://i832.photobucket.com/albums/z...ps9abaa596.jpg

NEWFISHER 03-23-2013 05:49 PM

Re: What Did You Do With Your Truck Today ?
 
Your fuax chrome grille looks good mounted!

tttuba 03-23-2013 07:52 PM

Re: What Did You Do With Your Truck Today ?
 
Bed parts came yesterday...time to pull off the bed to repair

OrrieG 03-23-2013 08:39 PM

Re: What Did You Do With Your Truck Today ?
 
More wiring to get the instruments in, but remembered I had to run the driver ac duct first, glad I did would have been interesting.

mark '87 930 03-23-2013 08:58 PM

Re: What Did You Do With Your Truck Today ?
 
@lazypineapple. WOW, that's really light.. i had a Porsche before this and it weighed 3150lbs with a full tank of gas and me in it. I thought these trucks were closer to 5000lbs?


All times are GMT -4. The time now is 05:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com