The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 47 of 108 « First 374243444546 47 48495051525797 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy (https://67-72chevytrucks.com/vboard/showthread.php?t=554172)

oldman3 04-11-2013 01:17 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Looks great, full steam ahead....Jim

longbed67 04-11-2013 07:36 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Lots of love yet to give her! It's looking pretty sick so far though! Is that just an optical illusion or is the sway bar tube at a different angle than the crossmember?

BigDaddyV 04-11-2013 09:16 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I've just found this Thread and I've been sitting on the edge of my chair for the last hour and a half reading and looking at this Awesome build! I cant wait to see it completed and God knows I would love to be able to do all of this to my 72!
Awesome, Killa Work! My hat is off to you and Ill be Watching!

screaminchevypickup 04-12-2013 03:05 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Frames looking killer..
Posted via Mobile Device

67cheby 04-12-2013 09:32 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by oldman3 (Post 6005170)
Looks great, full steam ahead....Jim
I am, I am !
Quote:
Originally Posted by longbed67 (Post 6005799)
Lots of love yet to give her! It's looking pretty sick so far though! Is that just an optical illusion or is the sway bar tube at a different angle than the crossmember?
just an optical illusion
Quote:
Originally Posted by BigDaddyV (Post 6005997)
I've just found this Thread and I've been sitting on the edge of my chair for the last hour and a half reading and looking at this Awesome build! I cant wait to see it completed and God knows I would love to be able to do all of this to my 72!
Awesome, Killa Work! My hat is off to you and Ill be Watching!
thanks man !
Quote:
Originally Posted by screaminchevypickup (Post 6006504)
Frames looking killer..
Posted via Mobile Device
Thanks Kyle trying to hurry as much as possible so I can get her to you !

67cheby 04-12-2013 09:34 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
4 Attachment(s)
Last night I shaved the shock mounting bubbles

67cheby 04-12-2013 09:38 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
3 Attachment(s)
a big thank you to fellow board member BLK65K10 for Square Peg's new dash I briefly mocked it up last night .....LOVE IT ! Those Dakota Digital gauges and Painless Phantom ignition are going to look sweet in there !

oldman3 04-12-2013 09:49 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Looking good Mike, keep it going...Jim

watahyahknow 04-12-2013 11:56 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
seems to fit pretty good , does it have a covering over the top or is it solid steel ?
shouldnt matter mush you can fill the ectra with some styrofoam , foam in a spraycan , or simulair and have it covered in leather or vinyl , speaking of vinyl you might even be able to make the fill in pieces of 2 milimetre vinyl sheet with some heat and patience , might make it eazier to adhere the covering to the corners

LEEVON 04-12-2013 12:08 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Raising the bar again...you're an animal!

67cheby 04-12-2013 12:15 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by oldman3 (Post 6006763)
Looking good Mike, keep it going...Jim
thanks Jim !
Quote:
Originally Posted by watahyahknow (Post 6006984)
seems to fit pretty good , does it have a covering over the top or is it solid steel ?
shouldnt matter mush you can fill the ectra with some styrofoam , foam in a spraycan , or simulair and have it covered in leather or vinyl , speaking of vinyl you might even be able to make the fill in pieces of 2 milimetre vinyl sheet with some heat and patience , might make it eazier to adhere the covering to the corners
I will make metal filler panels, smooth it off and paint it to match
Quote:
Originally Posted by LEEVON (Post 6007011)
Raising the bar again...you're an animal!
LOL, not sure about that but thanks !

trout 04-12-2013 01:14 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
That's bad as i think i want to do that to my 4x4 im building
Posted via Mobile Device

Bennett68C10 04-12-2013 03:26 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Looks great Mike, love the new dash
Posted via Mobile Device

BigDaddyV 04-12-2013 06:37 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Looks Killa bud! Im loven it~!

Dinos63 04-12-2013 06:47 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Sooo coool

butternut1972 04-13-2013 12:42 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Dash looks cool in there.

pickup67man 04-13-2013 01:47 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
I'm a little late on transporting, but since you have a tow pig you need a trailer for low trucks. Like a rollback trailer.

http://i763.photobucket.com/albums/x...ps31bff976.jpg
Posted via Mobile Device
Posted via Mobile Device

pickup67man 04-13-2013 01:50 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Here is what it looks like normally.

http://i763.photobucket.com/albums/x...psd449e82f.jpg
Posted via Mobile Device
Posted via Mobile Device

Rusbuilt 04-13-2013 06:45 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Thats a nice trailer!

babyblueoval 04-13-2013 09:09 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
How are the fenders attached to the trailer so they come off easily? At least I'm guessing they come off easily.

67cheby 04-13-2013 09:30 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Quote:
Originally Posted by trout (Post 6007103)
That's bad as i think i want to do that to my 4x4 im building
Posted via Mobile Device
thanks man !
Quote:
Originally Posted by Bennett--G4L (Post 6007326)
Looks great Mike, love the new dash
Posted via Mobile Device
thank you
Quote:
Originally Posted by BigDaddyV (Post 6007707)
Looks Killa bud! Im loven it~!
me too
Quote:
Originally Posted by Dinos63 (Post 6007726)
Sooo coool
thought you might like it ! LOL,its just a normal dash for you !
Quote:
Originally Posted by butternut1972 (Post 6008465)
Dash looks cool in there.
thanks man
Quote:
Originally Posted by pickup67man (Post 6008535)
I'm a little late on transporting, but since you have a tow pig you need a trailer for low trucks. Like a rollback trailer.

http://i763.photobucket.com/albums/x...ps31bff976.jpg
Posted via Mobile Device
Posted via Mobile Device
Quote:
Originally Posted by pickup67man (Post 6008537)
Here is what it looks like normally.

http://i763.photobucket.com/albums/x...psd449e82f.jpg
Posted via Mobile Device
Posted via Mobile Device
Man .....my dream trailer !
Quote:
Originally Posted by Rusbuilt (Post 6008634)
Thats a nice trailer!
yes it is !
Quote:
Originally Posted by babyblueoval (Post 6008754)
How are the fenders attached to the trailer so they come off easily? At least I'm guessing they come off easily.

NewType72 04-13-2013 03:24 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Wow that dash is gonna be a trip to see all done up in there.
Posted via Mobile Device

Bomp 04-14-2013 04:36 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Read about your shock bubble shave, inspired me so much I peg legged it out to the shop and shaved mine.
You've got some serious skillz:metal:
Posted via Mobile Device

jlsanborn 04-14-2013 06:16 PM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
Been away a while. Nice progress Mike! Chassis is shaping up well and I really dig the dash!

Dinos63 04-15-2013 01:10 AM
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 
mike you know i dig that dash!!


All times are GMT -4. The time now is 07:42 AM.
Page 47 of 108 « First 374243444546 47 48495051525797 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com