The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 48 of 86

« First

Last »

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)

- - My 50 roadster pickup build (https://67-72chevytrucks.com/vboard/showthread.php?t=459839)

RockinKees

05-03-2017 03:17 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by oldman3 (Post 7932244)

Since I've been so slow in getting anything done. Mark and I talked about the NSRA mid-american nats, last of this month. I've been to every one since I finished my truck, and I not going to miss this one (13 yrs). So, I will remove the drivers fender and inner, spray with epoxy primer, do body work, spray with sandable primer, reinstall everything. Give it a good shake down run and drive it to the event. Then after that I will tear it back apart, clean up everything, and start getting it ready for paint. Soooo hopefully I will have some more to post soon...Jim

That's the Spirit Jim!!!
We have our anual D-Day overhere, it's a Rockabilly Festival of our club, this year is #32, I only missed 1!!
Go to the Nats, the rest comes later!!

Did I tell you that you've done a great job so far?

oldman3

05-03-2017 07:05 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by RockinKees (Post 7933206)

Thanks Kees, appreicate the kind words...Jim

Advanced Design

05-03-2017 08:39 PM

Re: My 50 roadster pickup build

Very nice work on the repairs and mod's Jim. Enjoy the Nat's, I have no doubt you will make it!

oldman3

05-03-2017 11:17 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by Advanced Design (Post 7933479)

Very nice work on the repairs and mod's Jim. Enjoy the Nat's, I have no doubt you will make it!

Thanks Doug, I've never been this slow at doing things, but I will be there...Jim

joedoh

05-04-2017 02:25 PM

Re: My 50 roadster pickup build

gorgeous work!

oldman3

05-04-2017 11:08 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by joedoh (Post 7934185)

gorgeous work!

Thank you...Jim

reaper71

05-05-2017 03:37 PM

Re: My 50 roadster pickup build

4 Attachment(s)

Pic #1. Backside of inner fender ready for epoxy.

Pic #2. Back of front fender ready for epoxy.

Pic #3. back of inner sprayed in epoxy

Pic #4. back of fender sprayed in epoxy

At this point I can get the pieces ready to flip over and mount to the stands so I can shoot the front sides.

Mark

reaper71

05-05-2017 03:48 PM

Re: My 50 roadster pickup build

5 Attachment(s)

Pic #1. inner ready for epoxy

Pic #2. fender ready

I will skip to the finished pieces (shot in High Build)
The front fender was shot in 202 HB primer with 3 coats
The remaining parts were only sprayed 1 coat.

Pic #3. Front

Pic #4. splash and inner

Pic #5. The primer used (Shop line 202) and my 3M accuspray gun with 2.0 tip

Mark

oldman3

05-07-2017 11:05 AM

Re: My 50 roadster pickup build

2 Attachment(s)

All the above pics where taken by Mark on Friday 5/5. On Sat. 5/6 Mark sprayed the fender, inner and latch panel with a guide coat for sanding.

Pic 1 and Pic 2

oldman3

05-07-2017 11:15 AM

Re: My 50 roadster pickup build

5 Attachment(s)

Pics 1 -2 & 3 are after a ruff first blocking

Pic 4 ruff blocking

Pic 5 after addition blocking.

oldman3

05-07-2017 11:16 AM

Re: My 50 roadster pickup build

Have to leave for awhile, will post more pics this afternoon...Jim

oldman3

05-07-2017 03:56 PM

Re: My 50 roadster pickup build

4 Attachment(s)

Back with a few more pics.

Pic 1 thru 4, everything coated with a thin coat of filler.

oldman3

05-07-2017 04:04 PM

Re: My 50 roadster pickup build

3 Attachment(s)

The next three pics are after lots of sanding. Mark did the fender, and I did the easy stuff, inner and latch panel.

oldman3

05-07-2017 04:15 PM

Re: My 50 roadster pickup build

4 Attachment(s)

I went to the shop this morning and took these pics. On Sat. before Mark left, he mixed up some high build primer and resprayed the area. Ready for another round of block sanding this week...Jim

Indian113

05-07-2017 07:28 PM

Re: My 50 roadster pickup build

Looking Good Jim! All those years of taking care of Mark are Paying OFF! Unless he's got a bill started on your truck. Just kidding but he doe's do some great work.

Advanced Design

05-07-2017 08:50 PM

Re: My 50 roadster pickup build

Coming out very nice Jim. Do you have a guess on the hours spent block sanding?

oldman3

05-07-2017 09:23 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by Indian113 (Post 7936655)

Looking Good Jim! All those years of taking care of Mark are Paying OFF! Unless he's got a bill started on your truck. Just kidding but he doe's do some great work.

Thanks Ray, yes he does great work, and glad I have him helping me...Jim

oldman3

05-07-2017 09:25 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by Advanced Design (Post 7936733)

Coming out very nice Jim. Do you have a guess on the hours spent block sanding?

For these batch of pics, Mark has around 6 hrs or so, I did about 2 hrs. I'm hoping I can get time this week and block some more, then maybe one more prime to finish...Jim

lower50's

05-08-2017 08:11 PM

Re: My 50 roadster pickup build

With that much time spent they should look like there made of glass when your done :)

oldman3

05-08-2017 11:12 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by lower50's (Post 7937641)

With that much time spent they should look like there made of glass when your done :)

Hey lower, believe or it not, but we spent about the same today, Mark took pics with his phone, so I have to wait till tomorrow to post em...Jim

reaper71

05-09-2017 09:27 AM

Re: My 50 roadster pickup build

3 Attachment(s)

Just so you Guy's know the 6hrs was not all sanding hrs that was prime,filler sand prep and prime again.
The same thing went on yesterday everything looks pretty good I will block it today with 180 and do a final prime and then we can assemble for the Nats.

Pic #1.This was just after blocking and I had to put some polly filler in several areas and block again.

Pic #2. Polly filler

Pic #3. Upper splash panel/radiator cover
I then sprayed all with the 202 again last night and will block today and shoot the final primer.

Mark

reaper71

05-10-2017 09:01 AM

Re: My 50 roadster pickup build

Hey Guy's No pics today (same stuff as yesterday) All the pieces were sanded with 180 grit and the final primer was sprayed yesterday afternoon and now we can put things back together.
Will get some shots as that takes place.

Mark

RockinKees

05-11-2017 10:39 AM

Re: My 50 roadster pickup build

The end is near?
Almost ready for the new season?

oldman3

05-11-2017 08:13 PM

Re: My 50 roadster pickup build

Quote:

Originally Posted by RockinKees (Post 7940053)

The end is near?
Almost ready for the new season?

Kees, Yes and No on end is near. I'm sure Mark and I could have everything together in a few hours, and then just wiring lights, etc. But I'm also doing some changes for the fuel injection. My current distributor doesn't play well with the computor, I was told because I have a ballast resistor in my coil set-up it gets false readings. So I purchased what that recommended, a Summit Ready to Run distributor and coil.

Mark and I removed the top and seat, so I can get to the coil, which is under my dash, remove it and install the new one and hook up wires. I will also get my engine to TDC, remove the old dist. and install the new, and then retime everything. I just need someplace where I have room and time to do things the way I want. Been busy helping other people, need to stop this for awhile...Jim

oldman3

05-11-2017 08:31 PM

Re: My 50 roadster pickup build

4 Attachment(s)

Forgot to show a few pics

Pic 1 Top off and seat out.

Pic 2 Current dist. and wires going inside.

Pic 3 Current coil and wiring

Pic 4 New dist and coil.

All times are GMT -4. The time now is 08:24 AM.

Page 48 of 86

« First

Last »

Show 40 post(s) from this thread on one page