Re: What did you do to your truck today.The 3rd chapter
 

Finally had the time to weld up and grind smooth groves worn on the rear brake backing plates where the brake shoes ride. After over 50 years of use the grooves were substantial and the shoes would bind in them. Also replaced the shoes and spring kit, rear brakes are operating so much smother and quieter.

Re: What did you do to your truck today.The 3rd chapter
 

Out of winter storage

Re: What did you do to your truck today.The 3rd chapter
 

The lower door moldings on my C20 were barely hanging on, and I really wanted to see the front hole;). Anyway, I just reinstalled them and I'm pretty happy with it.

Re: What did you do to your truck today.The 3rd chapter
 

Just going through my brakes again myself. Question if I may where are you sourcing parts from?

Re: What did you do to your truck today.The 3rd chapter
 

This was a couple of week project. Test fit and didn't like the way it looked or fit. I made brackets to sit it the way I wanted. I'm happy with the end result.

Re: What did you do to your truck today.The 3rd chapter
 

Nothing quite like a sleeper.

Re: What did you do to your truck today.The 3rd chapter
 

She's fully loaded, no cruise control that's it. Thanks

Re: What did you do to your truck today.The 3rd chapter
 

I got another tach dash done. Waiting on parts for the other one.
Both will have tach's, and LED bulbs installed. I reset the odometer back to 00000 also!
I called Manes truck parts to check on a order and got to talking to the owner, he is sending me some NOS tach housings and inserts he had plus he called me back later and said he put some needle paint in the shipment also for free!

I'm going to have the speed warning back together soon also I hope. I had TBone1964 refurb it for me. :chevy:

Re: What did you do to your truck today.The 3rd chapter
 

Nice work Andy!:metal:Building a relationship with your suppliers is always a good thing.

Re: What did you do to your truck today.The 3rd chapter
 

Finally repainted the interior, cowl area, and jambs of my Ochre 71 C10. PO had repainted the truck a generic yellow (hood in photo that has not been repainted yet) that was in dire need of help. Back to original Ochre but a long way to go.

https://i.imgur.com/agy9ENf.jpg

Re: What did you do to your truck today.The 3rd chapter
 

Finished rebuilding my vent doors. Tear apart, blast, repaint and re-assemble with new seals. Just stuck them back in some zip loc bags and into my parts bin. Far from ready to re-install them but I had the parts and the time this weekend.

Re: What did you do to your truck today.The 3rd chapter
 

Finished wiring up the new Washer pump and connecting the Washer Reservoir, Nice to have clean windows at the touch of a button..

Re: What did you do to your truck today.The 3rd chapter
 

:metal:Gotta love it.

Re: What did you do to your truck today.The 3rd chapter
 

Installed a Lokar cable shift setup on my automatic. Then removed and and went back to the rod system.

The cable system did not work for me at all. Has anyone made this work?

Also installed a holley bracket and solenoid for increasing the idle with the AC running. Had to trim the bracket as it interfered with the throttle linkage and held the throttle open. Can believe Holley can't make a bracket for their carbs (new street avenger) that works without modifications

Re: What did you do to your truck today.The 3rd chapter
 

I'm interested to know I have the rod system and am not near ready to install it on my project truck 700r4 and was thinking of going to the cable thought it would be easier .....what didn't work?

Re: What did you do to your truck today.The 3rd chapter
 

Finished sanding and prepping my steering wheel getting it ready for epoxy.

Re: What did you do to your truck today.The 3rd chapter
 

I could not get it to line up anywhere close with the column gear positions. and it did not work very smooth. Went back to the Lokar rod system and works perfect just transmits vibration due to the idle quality of my cam.

Re: What did you do to your truck today.The 3rd chapter
 

thanks

Re: What did you do to your truck today.The 3rd chapter
 

Got the "white" on the cab

https://i.imgur.com/o3QnGwN.jpg

Re: What did you do to your truck today.The 3rd chapter
 

does the white go into the door jam at the middle? Could you post a picture looking the the door jam toward the striker plate area?

Re: What did you do to your truck today.The 3rd chapter
 

Found and installed the largest air cleaner I could fit! Had to take the alternator off to shoe horn it in.

Re: What did you do to your truck today.The 3rd chapter
 

How come you did the Beer Cooler Delete? I would have kept that one intact, boy talk about finding another one of those!

Re: What did you do to your truck today.The 3rd chapter
 

Tangier orange vs hugger orange this time.

Re: What did you do to your truck today.The 3rd chapter
 

I installed a new vacuum advance and cleaned up the mechanical advance. She doesn’t stumble off idle any more.
Pulled both front inner fenders in preparation to pull the whole front suspension out. It wasn’t totally necessary but figured the extra room would not hurt. Found the front fenders in pretty good shape but the core support and right inner fender rough.
Also put the Chevrolet license plate on the front that I had on my 70 model when I was 16. That was 34 years ago.

Re: What did you do to your truck today.The 3rd chapter
 

The blue shows the body lines better.