Re: My Dusty 71 GMCe Electruck
I think I need to put a BOLO out for another side mirror backing plate ?
wait is that sorta like saying ATM machine? |
Re: My Dusty 71 GMCe Electruck
Put off until tomorrow what is least fun today!
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
15...10 Commandments |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and now,
Racing Top Tip: in order to make turning left easier I run my right hand side, side mirror without the backing plate! |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
literally as soon as I took the bits above out of the oven I found the missing piece (at the bottom of the Atlantic)
|
Re: My Dusty 71 GMCe Electruck
That might need some decrusting.
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Oh great wizard of all things driveshaft. I have a question. Can you tell if the mating flanges are the same for the transmission and the differential? Somehow I ended up with the differential side but need the transmission side. Since I am cutting the flange off anyway to mount on a Chevy, it wouldn't really matter which side I have if they were the same.
Thx, Dave. |
Re: My Dusty 71 GMCe Electruck
Quote:
if thou are talking about the Lexus spin stick then Lexus goes out of their way to make the three prong flanges just slightly different, just enough for them not to mate and interchange , did you get the rubber donut with yours cause them donuts be different too? I think you can get a drive shaft from a none hybrid Lexus to mate with that transmission but don't quote me on it. |
Re: My Dusty 71 GMCe Electruck
Thanx. They look close but needed an expert opinion. I did get the transmission side donut. The guy who sold me the spin stick is looking to see if he still has the piece. This is where finger crossing is helpful.
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
good enuff for govermint work
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and order has been restored
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
the texter side brake line run
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
I still gotta massage it a bit, I'll do that once I clamp her down
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
and the driver side
|
Re: My Dusty 71 GMCe Electruck
and I ran out of line, I guess 15 feet was not enuff, so I gotta buy another spool to do the rear drum brake line run, not all the way back to the rear axle just to the transmission crossmember
|
Re: My Dusty 71 GMCe Electruck
looks like my MOOG steering linkage parts from Rock Auto are on a US tour complements of FedEx
MASPETH, NY KEASBEY, NJ SNYDER TWP, PA PORT CLINTON, OH CHICAGO, IL COUNTRYSIDE, IL CAMDEN, MO HIGGINS, TX ENCINO, NM NAVAJO NATION, AZ NEEDLES, CA BAKERSFIELD, CA STOCKTON, CA Shipment exception Weather delay |
Re: My Dusty 71 GMCe Electruck
Fedex is the WORST
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Gregski awesome watching this.. Interested to see how it turns out.. Kinda intrigued what that hybrid transmission could do with a divorced np205 t case for AWD lol
Sean |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
folks it helps to network with other forum members, a kind brother on here spotted this little gem on eBay for me
I love these manual non tilt no ac no ignition switch non telescoping steering columns - simple |
All times are GMT -4. The time now is 06:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com