![]() |
Re: post your 67-72 4x4
Nice 67 K10, great truck to build, lucky guy.
|
Re: post your 67-72 4x4
Looks like a cool truck. what are you plans.
|
Re: post your 67-72 4x4
Thanks guys. I am going to do a frame off on it. Going to keep everthing but the motor.original. Will return it to its original red with white top color scheme. I will rebuild the 350 the previous owner put in it. Would like to get that up into the 380 hp range. If I came across a 327(which was what it had from the factory) I might go that route. It actually runs and drives great...including the T221. Sat 10 years before I got it so it needs a lot of TLC. I am not sure I like manual steering so might convert that at some point. I think there are plenty of things to work on before I jump that hurdle. Looking forward to leaning on the fine folks on this forum to do this right.
|
Re: post your 67-72 4x4
Quote:
Sounds like it'll turn out looking alot like my K10, what shade of red are you thinking? Mine was originally 514 Red which is what I put it back to this summer but I also spec'd the white roof for the repaint - Adam |
Re: post your 67-72 4x4
Quote:
I will be getting a build thread started once I get going. Right now still trying to get 48 years worth of build up off of it so I can see what I am up against and get numbers off some things. My elbow already hurts and I haven't even started! If mine ends up looking similar to yours that will be fantastic. The original paint code on mine is 544(514 Body, and 521 top). I believe that will make it look just like yours, assuming you did 521 white. Mine didn't come with the cab lights(which look great) so I will not be doing those. The interior in mine is a grey color...forget the name and code off the top of my head. I will be sticking with that color. What sound deadening material did us use on the hump? Did it work? Brook |
Re: post your 67-72 4x4
That is a very nice truck to start with, looking forward to the build.
|
Re: post your 67-72 4x4
Quote:
The sound deadening material I got is generic stuff from Car Quest, it comes in 2 foot by 6 inch sheets. I did a bit last winter and it seemed to work okay, I'm installing a whole lot more this winter so I'll let you know how it works out. I'm going to double it up on the hump and I also put some on the inside of the hump to hopefully kill a bit more gear noise, time will tell! |
Re: post your 67-72 4x4
It is funny how the gear noise was a lot cooler to hear when a young guy but not so much being older, plus today we can do something about it.
|
Re: post your 67-72 4x4
This is such a good one I have posted elsewhere but just not the same I feel it's a nice here
|
Re: post your 67-72 4x4
Here is my tuck just befor I wanted to get the body work and pay t done
I went on a trial run just after I got a nice rhino liner I. The bed shouldn't you know it smash got rear ended it was bad he hit me so hard I shot up the bank and almost flipped the truck but I actualy can drive and drove the beast out of a bad situation! |
Re: post your 67-72 4x4
1 Attachment(s)
Qw
|
Re: post your 67-72 4x4
1 Attachment(s)
Pw
|
Re: post your 67-72 4x4
1 Attachment(s)
Now I got new bed and bumper but the bumper isn't in this one
|
Re: post your 67-72 4x4
Drove down to LA from Monterey and back blew out the Colecter gasket
|
Re: post your 67-72 4x4
1 Attachment(s)
Lwthis is the other guy
|
Re: post your 67-72 4x4
3 Attachment(s)
Here's my truck. It's a 1969 K1500. It was my grandfather's truck. A little over 24,000 original miles. Just bought it back in late November, and am now starting to work on it. It's been off the road for about 20 years, so there's a lot to do. But, it's pretty solid.
|
Re: post your 67-72 4x4
Bill, that looks really clean. Post some more pics when ya get it going.:metal:
|
Re: post your 67-72 4x4
Thanks sboris. Will post more pics as I go. Just finished looking at the posts you have on your K20. Absolutely love it!
|
Re: post your 67-72 4x4
There are some good lookin rigs in here!
Finally got some proper offroad pics of my rig. http://www.DIYMetalFabrication.com/w...4/IMG_0632.jpg http://www.DIYMetalFabrication.com/w...4/IMG_0614.jpg http://www.DIYMetalFabrication.com/w...4/IMG_0623.jpg This was just a cool picture on the way home. http://www.DIYMetalFabrication.com/w...4/IMG_0658.jpg A LOT more pictures and story here: LS Swap Payoff – KS Rocks Offroad Trip | DIY METAL FABRICATION .com . |
Re: post your 67-72 4x4
Quote:
|
Re: post your 67-72 4x4
3 Attachment(s)
Here is my '70. There's a few subtle modifications:
|
Re: post your 67-72 4x4
|
Re: post your 67-72 4x4
Finally found a decent factory 72 SWB K10 4 speed at a respectable price. No small feat in my area I discovered. Rust above windshield. Drivers side rocker panel, passenger door and fender. Seller included brand new replacements of all of it except roof patch that he hadn't gotten to installing. He even included the original wheels and hubcaps! Frame and the rest of the cab /front clip not mentioned above look rust free and straight.
Here's a few pics from this morning before she goes inside and gets torn down. Plans are swap bed to fleet side, rust repair, body work and paint, either a 12v diesel or a big block transplant and whatever suspension/frame changes that go with that, change out rear springs (has blocks now), bucket seats, relocate fuel tank, new wheels and tires, A/C and a few other items along the way. I'll start a build thread once I get going. Anyways here's a few pics for now... http://img.photobucket.com/albums/v2...pse8afdf77.jpg http://img.photobucket.com/albums/v2...ps205fafe4.jpg http://img.photobucket.com/albums/v2...psb38ea92f.jpg |
Re: post your 67-72 4x4
Good lookin stepper. Look forward to your build. All great trucks here!
|
1 Attachment(s)
Quote:
That's from a 1972 Chavel Posted via Mobile Device |
All times are GMT -4. The time now is 03:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com