Re: What did you do to your truck today.The 3rd chapter
 

No shim at all . Nice and quite

Re: What did you do to your truck today.The 3rd chapter
 

Put the console in the 72 . Worked out nicely just need to wire it up a aim the curtesy lamps

Re: What did you do to your truck today.The 3rd chapter
 

Drove it, that's what it's for ;-)

Re: What did you do to your truck today.The 3rd chapter
 

It looks great! I'm waiting for mine. :lol:

Re: What did you do to your truck today.The 3rd chapter
 

Looks great! What color is your truck?

Re: What did you do to your truck today.The 3rd chapter
 

Placer gold which is a car color, special order with the Husky package

Re: What did you do to your truck today.The 3rd chapter
 

Got most of my parts back from the body shop yesterday so I started assembly. Removed the old bed fender, installed the bed steps, installed gravel shields, and sprayed undercoating on the replacement fender. Also drilled out the carriage bolts a PO used on the bed fenders and installed stock style screws.

Re: What did you do to your truck today.The 3rd chapter
 

Looking good!

Re: What did you do to your truck today.The 3rd chapter
 

Got my bedsides ready for blast n paint!

Re: What did you do to your truck today.The 3rd chapter
 

Got the old girl purring today, thanks to my new friend Eddie. We discovered the timing way off, too far advanced. Back to a factory 8 degrees, and she really smoothed out. Then getting the dwell back to 30, and some carb adjustment. Wow what a difference.

Also found that the mufflers are shot, broken inside and rattling loudly... so off to the muffler shop ASAFP.

Also reconnected the cig lighter, and the AM radio antenna cable. Guess what, the 50 year old stock AM still works!

Got the hood adjusted so it doesn't stick up by the cowl too. So no new hinges needed.

Re: What did you do to your truck today.The 3rd chapter
 

Yeah ChevyGuy, these radios still work easily. I have the problem of the speaker not being hooked up right by a previous owner.

Re: What did you do to your truck today.The 3rd chapter
 

Installed bed fender and grille. Will be picking up driver door from the body shop on Monday.

Re: What did you do to your truck today.The 3rd chapter
 

What ya doing with the drivers fender?

Re: What did you do to your truck today.The 3rd chapter
 

That primer one I've got on there is temporary. I got the original one repaired and painted, but I'm going to install it after I install the door since the hinge bolts are a pain to access with the fender in place. I was planning on installing the grille at that same time, but I got impatient.

Re: What did you do to your truck today.The 3rd chapter
 

Aww, now I understand.. :metal:

Re: What did you do to your truck today.The 3rd chapter
 

It's looking good too. ;)

Re: What did you do to your truck today.The 3rd chapter
 

Super happy!! Got new Magnaflow mufflers installed today. The old ones were cheapo's that were blown out. OMG does she sound awesome now!!!

:metal:

Ran out of time to replace the donut gaskets (manifold bolts are rusted to crap) so I'll go back next week.

If any of y'all are in or near Jacksonville FL, I highly recommend Muffler City. Ron is a C10 guy and really knows these trucks.

Re: What did you do to your truck today.The 3rd chapter
 

Safe to say when rubber weather stripping has to be chipped out, it's time to be replaced. Also replaced the wing window felt. Thanks to Brothers truck parts youtube tutorial.

Re: What did you do to your truck today.The 3rd chapter
 

Going to paint the replacement column for my 72 . Took the shifter arm off but couldn’t get the turn signal stalk off have both new. At one time someone put what looks like JB Weld on the stalk and screw I even tried my 3/8ths impact on it no joy. Don’t want to break it since everything works and is the correct red knob flasher. So disassembly is at a stand still any suggestions to remove the screw ?

Re: What did you do to your truck today.The 3rd chapter
 

Try a little bit of heat but be careful.

Re: What did you do to your truck today.The 3rd chapter
 

Ordered the bed box for my truck from Mar K today. Wife and I are going to do a day trip next Friday and pick it up at their place in Oklahoma City.

Re: What did you do to your truck today.The 3rd chapter
 

Was thinking maybe heat up cheap Phillips head . I do have a NOS correct turn signal switch but don’t want to use it if I don’t have too

Re: What did you do to your truck today.The 3rd chapter
 

I suppose you could drill the screw out but it would be tough getting all of it out deep in the threads. You'd still need to heat that JB Weld to release the lever from it's grip though.

Re: What did you do to your truck today.The 3rd chapter
 

Buy the dorman turn signal repair kit (49300). When it arrives you can drill out the screw and save the red emergence flasher knob.

Re: What did you do to your truck today.The 3rd chapter
 

Guess I could cannibalize this one if need be

Re: What did you do to your truck today.The 3rd chapter
 

Put 4" rear drop springs in the 71. Front is stock 50 year old springs.

Before and after:

Re: What did you do to your truck today.The 3rd chapter
 

Looks good! :metal:

Re: What did you do to your truck today.The 3rd chapter
 

I Was able to get my frame cut today on the 72 C10. Hopefully tomorrow I will have some time to weld it back together.

Re: What did you do to your truck today.The 3rd chapter
 

Gave mine a couple of black and blue eyes,Attachment 2090392

Re: What did you do to your truck today.The 3rd chapter
 

90 right

Re: What did you do to your truck today.The 3rd chapter
 

Finished up the console for the 72

Re: What did you do to your truck today.The 3rd chapter
 

I like it.

Re: What did you do to your truck today.The 3rd chapter
 

Looks like Boog is about 17 feet tall, and all legs! :lol:

Re: What did you do to your truck today.The 3rd chapter
 

That look really nice! I'm trying to talk my wife into the black and white hound's tooth inserts because the vinyl gets hot as a blowtorch in the California sun. She wants the original black CST brocade, but I'm not doing it. Originality be damned, given the scorch factor.

Re: What did you do to your truck today.The 3rd chapter
 

Thanks. They were upright on my computer. Not sure why they flipped. How did you fix it? I didn't see a way to edit the pictures.

Re: What did you do to your truck today.The 3rd chapter
 

This is common with pics taken with a phone. I also have had some that looked right in the saved pic folder on the computer but were turned sideways when posted in a thread. To correct it I open the pic in that pic folder and click edit, then rotate it 360* and save it. It will be correct the next time I post it. I always click the "preview post" button before submitting a post with a picture to ensure it is oriented correctly.
What I do is open the pic and select edit. I guess it depends on what photo viewer you use as to how you would edit the pic.
As for your pics I right clicked on yours then clicked save them to a pic folder on my pc then opened the pics individually and click edit, then clicked rotate 90* and exit the pic. Before closing the pic it asks me if I want to save the changes made which I do. Then I repost your pics in the correct orientation.
I'm no techy. This is just how I figured out how to do it. ;)

Re: What did you do to your truck today.The 3rd chapter
 

That came out nice! What color is your truck?

Re: What did you do to your truck today.The 3rd chapter
 

Special order . No paint codes anywhere but I had the interior guned by my paint guy. Came back as Placer gold part of the Husky package that University Chevrolet in Seattle offered . Outside has had a repaint and they used Ochre but the inside of the bed firewall and interior are the original .

In the pic dash looks dark because of the lighting . The kickpanel is more accurate as to color

Re: What did you do to your truck today.The 3rd chapter
 

My wife hates vinyl (and leather) in a vehicle ,original was like yours with the dark cloth inserts so I put the black and white in it . Was going to go with the yellow hounds tooth but glad I didnt ... heres a pic of the swatch

Re: What did you do to your truck today.The 3rd chapter
 

That's the color for the 69 Daytona yellow Camaro interior . :chevy: