![]() |
Re: '63 GMC Project
Thanks!
I don't know for sure what the deal is with the rear bumper. I don't know how far out they should be but my bed is about 1" from the cab so I am going to try and slide the bed forward about a 1/4" and see how it looks. |
Re: '63 GMC Project
2 Attachment(s)
My new shiftknob came yesterday...
|
Re: '63 GMC Project
haha thats cool
is it drilled and tapped already? |
Re: '63 GMC Project
Whoa, awesome.
|
Re: '63 GMC Project
Oh ya, I checked my rear bumper with the new brackets and it's about 3/8 off the box.
|
Re: '63 GMC Project
Yeah it's an actual shiftknob, not something I'm making into one. it comes drilled out and a threaded insert pressed in. It also comes with a adapter of your choice. I got it here. hotrodshiftknob.com. Check out the link to House O' Speed while you're there. Thier logo has a 64-66 Suburban on it.
Thanks for the measurement Delmo! I really appreciate it. |
Re: '63 GMC Project
Quote:
dude, i wouldn't even wanna touch the shifter it's definitely "creep"y, :lol: |
Re: '63 GMC Project
Duuude nice work truck is sic!!, the rear bumper brk maybe different for a gmc, did the truck have leaf spring rear? I have notice the difference in the gmc frames i have
|
Re: '63 GMC Project
Hey creep! Your scoop looks kinda familiar...lol
http://i153.photobucket.com/albums/s...k/DSCN2733.jpg |
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
Quote:
By the way your truck is completely BAD@$$! |
Re: '63 GMC Project
The camel spider is pretty cool, we used to make them and scorpians fight in Iraq. That's a small one, and those things could run like the wind.
|
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
My seat is just about ready to go in, just need to tidy up the inside a little. We got the motor fired for the first time also and it sounds really good, little bit of lope to the cam. Tomorrow I'm taking the driveshaft to get shortened. It's getting really close now. Hopefully I will be able to drive it to the last show of the year in 2 weeks.
|
Re: '63 GMC Project
2 Attachment(s)
The seat and motor
|
Re: '63 GMC Project
Truck looks sweet love the icebox mod for the battery.. If thats thermo tec header wrap on your headers it will rust the header tubes away or at least it did on my truck..
|
Re: '63 GMC Project
im sure u mentioned this before but where did u get all of ur suspension stuff, it looks sick and im looking at all possible options for bagging my truck
nice bulid too, i like when people lay the longbeds in the weeds |
Re: '63 GMC Project
Thanks guys.
The header wrap is DEI Titanium. Don't know how good it is but it looks cool and doesn't need sprayed or coated at all. The air ride is a P-51 crossmember kit for the front and a Superlift wishbone kit for the rear, both made by *****************. |
Re: '63 GMC Project
Looking good :thumbs:
What alternator bracket is that? I'm curious since it is a passenger side with a short water pump. Speaking of alternator, it is me or is there something wierd in this pic? http://www.67-72chevytrucks.com/vboa...1&d=1285514558 I'm seeing 2 belts on the alternator, but only one makes it to the water pump and crank pulley :crazy: |
Re: '63 GMC Project
Quote:
|
Re: '63 GMC Project
Ahhh now I see. I didn't realize that the alternator pulley was chrome on the front side :o
Thanks firenuttz Quote:
|
Re: '63 GMC Project
Yeah, the alternator fan is chrome but the pulley is clearcoated aluminum. The bracket and pulleys are made by March.
|
Re: '63 GMC Project
1 Attachment(s)
We actually made it out to the show yesterday. The temp gauge reads hot and the tranny hasn't been fully tested yet so we trailered it but I at least got to cruise it into the show under it's own power. The exhaust is loud and mean sounding so it got peoples attention as it rolled by. I actually had a small crowd of people around by the time I got out of the truck. The air ride fills and dumps extremely fast, not allowing much fine tuning for ride height so I am going to change to a slightly lower pressure switch and instal adjustable mufflers on the dump valves.
I couldn't find my camera so all I have is a cell phone pic. |
Re: '63 GMC Project
Quote:
ron |
All times are GMT -4. The time now is 10:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com