Re: parting out my 63
 

can i buy the anchor pins from the front brakes the large bolt that holds the springs at 1200 on the backing plate

Re: parting out my 62
 

Rob1961 sure no problem. $30 shipped ok for you? Let me know.

Chris86 no problem. Can you post a pic of what it is exactly.
Posted via Mobile Device

Re: parting out my 62
 

this it it it screws into the spindle has to come out of the front you need a breaker bar and some elbow grease

Re: parting out my 62
 

bend the washer back them unscrew it i need all the washers of it also even the thrashed one

Re: parting out my 62
 

How about the doors themselves without the inner panels? What shape are they in and what would it cost plus shipping? Thanks, Aboz

Re: parting out my 62
 

Is the instrument cluster available? Need it shipped to 28079. Thanks, Aboz

Re: parting out my 62
 

Guys I am sorry. Somehow I unsubscribed to my own thread... Lol.
I'll check those parts out and post up some pics. Give me a couple of days to get out to the shop.
Juan
Posted via Mobile Device

Re: parting out my 62
 

Hi do you have a low hump transmission cover ive been looking everywhere and cant seem to find one

Re: parting out my 62
 

PM sent

Re: parting out my 62
 

Hows the wiring harness complete? for my 66

Re: parting out my 62
 

looking for the parking brake system including all the cables in the drums and up to the front cab? 66 c10

Re: parting out my 62
 

i need a door latch control for the passenger side. let me know if you have one and if your willing to part with it. price shipped to 85212?

Re: parting out my 62
 

I could use a decent wiring harness complete if there is such thing?

Re: parting out my 62
 

Ok guys I finally made it out to the shop were the truck is.
Low hump tranny cover yes I have one. Pass side has sone rust on the mounting hole bottom right corner.

No harness left in truck, po cut it all out before I got truck.

Pass side door lock mech is in great shape. $30 for the whole thing plus $12 shipping. Let me know.

Chris 86. I have those parts on the front drums. I can remove for you no problem. I just need to find a little bit of time to pull them. Let me know if your still interested.
Posted via Mobile Device

Re: parting out my 62
 

Oh ill check on the parking brake cable assembly and let you know.
Posted via Mobile Device

Re: parting out my 62
 

I also have a 1962 , I am in need of a center-link relay rod from the steering system ,is yours available? if so how much? delivered to WI 53916. thanks for your time.

Re: parting out my 62
 

complete wiring harness and the sshift linkage for a 350t?

Re: parting out my 62
 

Are you looking for the linkage that connected to the bottom of the colum?

The harness is gone. Cut up and removed by prior owner.
Posted via Mobile Device

Re: parting out my 62
 

Do you have the spring for the passenger side door handle?

Re: parting out my 62
 

I also (seriously) need a center link for my 62' C-10 ,if the center link is still with the front end components, i'll buy it. I have paypal or can pay by U.S. Postal money order.

Re: parting out my 62
 

Blue blood. I have the whole front susp. do you want just the center link or do you need more? Let me know what your looking for.
Juan

Re: parting out my 62
 

I need just the center link, but if you have the torsion bars out of the lower arms & they're in good condition, i'd be interested in buying those also.
My zip code is 01821
-Thanks!

Re: parting out my 62
 

Yes I have them. How's $50 for the center link and $50 for both the bars? I'll have to check on shipping. I usually go USPS parcel post it's the cheapest shipping I've found. I sent a bumper to Ohio for $41 bucks a few months ago. That was half of what ups wanted.
Posted via Mobile Device

Re: parting out my 62
 

So $100. for parts plus shipping? It's a deal.
I'll PM you my shipping info & you can tell me how you want to get paid.
-Thanks again!

Re: parting out my 62
 

Paypal is fine. I'll send you my Paypal address. Thanks
Posted via Mobile Device