The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Squarebody Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=139)

- - my 80 build (https://67-72chevytrucks.com/vboard/showthread.php?t=283326)

aww man, im only 17 haha, i need to do some **** to my truck, your build is really inspiring me to get to work hahaha, I NEED MONEY!!! lol, how do you get so much freakin money???? lol, nice truck man

Thanks Hoopty, Oh I'm a broke redneck, The way me and my dad did it was being at the wright place at the wright time, like becoming goods friends with a paint and body shop owner and helping build a fence and retaing wall, for the paint and body, me and my dad took the truck all apart at his shop, we did most of sanding and a little body, we just had to buy the materials and a little labor cost, also the motor, transmission and hood we got cheap buying through the owner, also my neighbor Dad owned a body shop/ wrecking yard I bought a lot parts 1/3 of the price cost at a regular wrecking yard.The way we did it was we took the truck down to the cab sitting on the frame and left every thing that was still good intact the brake system and rear suspension the we replace the bad body panels and ,motor with good used one, and replaced all the front and cab bushing, and worn steering components, wile the body work was taken place the front suspension put back in place then nice coat of black paint was coated on the chassis and engine compartment then the engine was back in, then all then all the body work was done then primer then white pearl paint inside the cab, fenders, doors, and door jams, then it was put back together, and I was able to drive it then a month later then it back to paint shop, then it was home for good, Then it was my chance make it look good, started off with the stuff that made the truck replaced the junkie bumper and missing grille trim with reproduction, and seats then after that I would get parts a little at a time, but almost 3 years I've been working on my close to being done which never will be but close to be looking complete, but something I would never do is try to build something that going to take 10 + years of working on it and not drive until it been finished, because there's been a bunch of people that do it that way and never get to enjoy it because there out money and have to sell, I hope my advice helps you on your truck

my dad made me a wood trim piece out of some left over wood flooring

http://i147.photobucket.com/albums/r...0/IMAG1551.jpg

http://i147.photobucket.com/albums/r...0/IMAG1550.jpg

shoot some clear coat on that wood it will really make it stand out, give it a wet glossy look, it bring's wood life out of the wood.

I shot a couple coats of clear on the wood, looks a lot better, but I might go a way with the wood and use a factory non a/c piece

I finally got some good news on my seats the upholster finally got a chance to work on them so I should be getting them later today

looking good... a different bezel is gonna set the interior off nicely. well done man!

thanks, I decided I'm going to try a piece of sheet metal for the dash bezel for now, until I get some one to show me how to fiber glass the right way, and also the radio is going back to the factory spot

I finished up the dash bezel for gauges, and I started on the cover for the radio and headlight switch
http://i147.photobucket.com/albums/r...0/IMAG1558.jpg
http://i147.photobucket.com/albums/r...0/IMAG1559.jpg

that look's good, your interior is coming along nice to keep up the good work....:metal:.:chevy:

I started back working under the hood since looks fine to me for now
http://i147.photobucket.com/albums/r...0/IMAG1592.jpg
also relocated the hood release
http://i147.photobucket.com/albums/r...0/IMAG1595.jpg
http://i147.photobucket.com/albums/r...0/IMAG1594.jpg
I shot a quick coat of rattle can gloss black on the fender, to see what it looks like until I get is a spray gun with better paint
http://i147.photobucket.com/albums/r...0/IMAG1593.jpg

Today I finished up the temporary firewall peaces and added dynamat behind to keep it from radeling maybe the pieces will stay and I will use some pop rivets instead of the screws, painted the fenders, and made a cover for the windshield washer outlet tubes, and tomorrow I will temporary fix the inner fenders with a little massage, and prime and paint them, and then I'll add a hood liner, the under will be done for now

do you have alot of time to work on your truck? i want to do so much to mine but im always working or my old lady wants to hang out hahaha. is that a 350 you have in there? is it a lumpier cam?

Yes, I'm unemployed at the moment, but I do a little old jobs, it 350 bored to a 355, with a mild r/v cam

oh awesome, yeah im trying to rebuild a 350 at the moment and put an r/v cam in it lol, I'm also thinking of putting a crank out of a 400 into it? :D the one thing i like about my truck is that its a longbed and not very many ppl do up longbeds haha, but your truck does look sweet by the way, maybe one day i can take a pic of all of my dads trucks haha, he has a 75 chevy 3500 freshly restored, a 77 Gmc c10 shortbed tubbed out and slammed (race truck) got an 87 chevy tubbed out and slammed, then my truck which is an 86 gmc wrangler edition thats just lowered with a 305 and exhaust lol

thats good that your going to fix up a long bed, and thanks, your dad one nice collection

yeah, i wish it were mine :'(

Today me and my dad made a sub box it fits stung in between seat belts and the center of the box is going to be for storage, but the box needs a little trimming, then it will maybe be covered in blue Naugahyde
http://i147.photobucket.com/albums/r...0/IMAG1623.jpg
http://i147.photobucket.com/albums/r...0/IMAG1624.jpg

with those bucket seats, you should build a center counsil style box like i'm going to be starting on this week.