Re: NAPCO Thread
 

sure they arent 17.5? thats 6 lug correct?

Re: NAPCO Thread
 

I don't think I made a mistake. I looked at one of the tires today. It is a Firestone 8-19.5.
They are 8 lug. It is a 3/4 ton truck.

Re: NAPCO Thread
 

Okay, i thought she was a 6 lugger :lol:


Dad has a set of those on a 57 3/4, really neat wheels :metal:

Re: NAPCO Thread
 

NAPCO reached an agreement with both GMC and Chevrolet to supply them with the Powr-Pak conversion kits, and GMC began to produce 4x4 trucks on the factory assembly line (using NAPCO components) starting in 1956, with Chevrolet following suite in 1957. By the end of 1957 both GMC and Chevrolet trucks could be ordered from the factory with the NAPCO Powr-Pak conversion. The first 'All GM' factory 4x4's were introduced in 1960 when both Chevrolet and GMC went to a totally new chassis. NAPCO and its Powr-Pak conversion were left out of the equation due to the introduction of GM's completely redesigned truck line featuring independent front suspension on the two wheel drive trucks and a 4-wheel drive specific chassis on the 4-wheel drive trucks.

Re: NAPCO Thread
 

thirdstreettito
I had not seen that video but I had heard about it. I saw that truck at last summers "Brother's" truck show south of Los Angeles. The truck was over the top in detail. Incredible work on the body and suspension as well. The guy appearantly likes to build trucks and then goes out and drives the wheels off of them (snaping axles is not a big deal to him??) he uses the bigger 3/4 ton axles so that he can get the "posi" unit inside it.

I am not sure who he is or what he does but I liked his work !!!!

Re: NAPCO Thread
 

57napco
If that was your truck in the Pikes Peak video, I am way jealous. I was going to install late model running gear in my 56 until I saw that video.... then I had to watch it about a dozen times. I have been to the top of Pikes Peak (the easy way) and that was pretty cool the way they did it back then... your truck is/was a cool piece of history. :metal:
thanks

Re: NAPCO Thread
 

That video is amazing, I love watching it, those trucks were pretty darn rugged.

Re: NAPCO Thread
 

75GMC454,

That's a nice 56, a keeper for sure.

Bob

Re: NAPCO Thread
 

just needs a little air in the tires and shes good to go:lol:

Re: NAPCO Thread
 

Yeah,afterall,it`s got hubcaps.

Re: NAPCO Thread
 

I know it is ugly, and it needs alot more than air in the tires. I am going to start on it very quickly. I am going to have the cab stripped and edp coated. I have already found some excellent doors off of an old gmc fire truck. I have also found a bed for it. I am going to have the grille and bumper and all chrome pieces stripped and rechromed.

SpecialK mentioned the hubcaps, I don't know how they survived on the truck. I figure that chrome 3/4 ton hubcaps would be hard to find. Should I have these rechromed or does anyone have some they don't need?:)

Is there any way to tell if this truck had a bed or was just a cab and chassis from the factory? Either way it is getting a proper truck bed.

Re: NAPCO Thread
 

I can`t knock that truck.You are right,it was a fine example (still is) rom the factory.I fliped to find the highly optioned`72 K/20s I had.This is the vintage equivelent...only way cooooler.I commented on the caps because it speaks for it`s care while in service.It may have sat and declined some,it`s very restorable.About the bed...not sure to be honest.I`d imagine it was a pickup.That`s just me.I kinda doubt it would be a fancy truck as a cab`n`chassis.I`ve been wrong before.I see this truck as the same one shown in that video.

Re: NAPCO Thread
 

Nice thing about the old GMC's is the V8 was a Pontiac engine. Can you say 389,421 or 455? Now that would be a torque monster tow machine!

Re: NAPCO Thread
 

Great start!

Re: NAPCO Thread
 

Re: NAPCO Thread
 

Going for a NAPCO look on my 49 sitting on a 2000 ZR2

Re: NAPCO Thread
 

Very cool truck 49ZR2! Do you have a thread about the build?

Re: NAPCO Thread
 

A few Pictures of my 58 3/4 ton project

Re: NAPCO Thread
 

Heres my '56 3/4ton. It was a county/township plow truck in Michigan's U.P. The 235 runs like a champ still. Currently in hibernation in northern Minnesota, still gets used time to time around the cabin in summer. Had 15" 8 lug tube type split rims when I bought it. I'm thinking the Napco setup was swapped from an older truck into this one since the front axle pumpkin is on the drivers side and not the passenger side. Maybe the county or township saved a few bucks buying a 2wd and had the part swapped over from their old truck.
https://scontent-ord1-1.xx.fbcdn.net...5b&oe=58EE2D23
https://scontent-ord1-1.xx.fbcdn.net...ad&oe=58DFC010

Re: NAPCO Thread
 

Here is a NAPCO my dad restored back in the early 80's. He had alot of machine work done to the transfer case and axles to run non-caged bearings. The picture on the ball field is Odgen Utah in 1983, it was the Chevy/GMC truck nationals. We drove from California and back to the show all the way. Other pictures are at Magic Mountain in Valencia California, 1984. The one with the stand and the chopped car next to it was in Oakhurst California in 1985. The truck was all original appearing. Except under the hood was a 327 tunnel ram with two 465cfm Holleys, m-22 4-speed transmission (car) with the stock transfer case and axles with 3.90 gears. It had 33" tires on it then. It got traded off, I heard it went to Iowa somewhere........anyone seen it?

Re: NAPCO Thread
 

Heres the pictures......

Re: NAPCO Thread
 

Sweet truck.... try running the plates to see if you can track it down. That would be cool if you could find it. I remember those magic mountain truck shows. I drooled all over those trucks.
bb

Re: NAPCO Thread
 

Thanks. The Chevy Madness Meets were pretty cool at Magic Mountain. One side of the parking lot would be trucks, and the other side would be cars. The plates were California with them being personalized, my last name. My dad traded for a 70 Chevelle drop top, and a 88 incher Harley back then. I heard the truck may have went to Iowa, the guys name was Dan Adams, should not be hard to find with that last name? lol The tunnel ram came off and wound up on my 64 Nova, the four speed came out, and a my dad built a TH400 for it. My dad also scribed his name inside the diffrential covers. It was actually a GMC with a Chevy Gate and front clip, so it had the GMC dash. It would be nice to find.....

Re: NAPCO Thread
 

Here is a Howe Coleman Conversion

http://www.hankstruckpictures.com/pi...4/file0019.jpg

Re: NAPCO Thread
 

That is one serious front differential and axle assembly. I like it.