Re: "Project 64"
1 Attachment(s)
Just to show yall what I bought. Hope it comes in soon.
|
Re: "Project 64"
Sweet , did you get the kit?
|
Re: "Project 64"
Yeah man the kit got here just like that. So I got on the CNC and made some new mounting brackets for the lower bars. Made all the mounting tabs, stripped the paint off that was crappy.
Gonna put some zerk fittings in the rod ends tomorrow at work. I ordered some more 2X3 3/16 for the wishbone crossmember. Gonna cut it all up and hopefully start tacking it together tomorrow. I'll try get some pics tomorrow up of everthing I've made and done. |
Re: "Project 64"
nice work your doing
|
Re: "Project 64"
Thanks Broke and Welcome to the site. you need any help just ask away. You have a thread going?
|
Re: "Project 64"
yes i do but only a few pictures and i dont know how to link it
|
Re: "Project 64"
Your truck is gonna lay frame, what the heck do you need an e-brake for? :lol:
|
Re: "Project 64"
Hey broke when you go to your thread, just copy and paste the address on mine. And when you get a chance you can go to your user CP and go to your sig and post it on there as well.
Creep I was thinking that in TX you have to have one. I thought I saw it somewhere on the DMV site but I may be wrong. I'll have to look again. |
Re: "Project 64"
here it is thanks for the help
http://67-72chevytrucks.com/vboard/s...d.php?t=383205 |
Re: "Project 64"
Nice hardware Paul. Can't wait to see it installed.
|
Re: "Project 64"
:metal::metal::metal::metal::metal::bling2:
|
Re: "Project 64"
nice to see your finally getting to work on your truck , looks like we both need to quit our day job to have time to work on our toys!!! Hey nice avatar!! I like looking at my handy work. Eric
|
Re: "Project 64"
5 Attachment(s)
Well here are some pictures of the cab it has some rust
|
Re: "Project 64"
thanks for the pics. Looks to be about in the same shape as mine.
|
Re: "Project 64"
yea after i looked at it i knew you wouldn't won't it lol
|
Re: "Project 64"
What is he doing with it.
I hope to have some pics to post this weekend. Maybe my sim card will work in my laptop. |
Re: "Project 64"
Nice parts
|
Re: "Project 64"
The suspension parts I got. I'm not going to use. I cut the ends off them and I'm going to make the bars longer. They were too short and I couldn't get the angles that I wanted. Waiting on the chow saw this weekend to build another crossmember so I can start mounting stuff.
|
Re: "Project 64"
1 Attachment(s)
Hey man, how low are you going? Cut up good parts like that. At least you got the nad's to do that! I had to swap cabs on my truck also and a few other parts. but its quicker to tell you what I kept. I only kept the frame, bellhousing, spindles, rear trailing arms and believe it or not the ignition switch. that truck should have a E-bay sticker on it! My front and rear fenders still smell like rice! Sent you more of that grinder art I've been doing
|
Re: "Project 64"
that looks sweet man
|
Re: "Project 64"
1 Attachment(s)
Scott this is what I'm looking for. http://www.4x4wire.com/toyota/tech/cvmod/ I'll give you a call monday to see if you can get it.
|
Re: "Project 64"
Ah ok i see know, get ready to pay for those bad boys they are not cheap, are you running that to get more angle on your driveline or what?
|
Re: "Project 64"
well you know i"m running the SD raised crossmember. I'm sitting at 6* down. I dont want to raise it up because it will get in the way of the exhaust, and I dont want to cut the hell out of my tunnel. Nate PB said that is what he runs on his trucks with no problem. But he hasn't got back to use with part numbers and where he gets his from.
|
Re: "Project 64"
Quote:
http://67-72chevytrucks.com/vboard/s...nt#post3038944 |
Re: "Project 64"
Well hey there you go ;)
We could build you what ever you wanted but it might be better to find a drive line shop around your area just to save on the shipping costs. Search Inland Truck Parts thats where i work and there are a couple in Texas, if you dont have a shop around your area that does drive shafts. |
All times are GMT -4. The time now is 10:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com