Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Okay, I'll buy the faceplate too if you can get an answer on the mirror. I'll wait a couple more days for an answer back. -Roger

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I will take the wiring harness. Sorry i pm'd you instaed of posting in the thread. Did you end up selling the vent windows? Also you mentioned you will have parts at the Canby swap meet. are you still going to be there?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

As promised I'll let butternut have first shot. I'm out on any other parts. Good luck with the rest of your sales. Sharpie

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

OK $8.95 total sounds good to me. That's all I really need at the moment, mine is broken. I see ppl paying for stuff here using paypal. I have paypal acct or I can send you a classic check.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Ill take the belts,visors and the armrests . What shape are the armrests and do you still have the heater vents on the top of the dash and what shape are they and color? I didnt mean to take so long on the reply I works nights. thanks

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Are the following parts still available:

COMPLETE shifter linkage?
Vacuum line from trans to carb?
Fitting on intake manifold to attach the vacuum line?

I had asked about the slip yoke but I will pass on that. Thanks.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

bollybib: Paypal would be best PM sent with info.

sharpie72: your a good sport, thanks

butternut72: the underdash wiring is yours pending payment.

roger0080: You are down for the following:

rear view mirror
speedo face plate
Fuel line to carb
Oil Pressure line
Headlight switch with knob
Cigar lighter
alternator brackets
double groove water pump pulley
How much for the SPID itself? free with your purchase

skeeterbug: 8.85 via ups

Solego: rear cross member 30.00 shipping 16.54 and dip it for FREE.

breeh: shipping would be 17.14 how about 85.00 shipped?

burb71: 17.50 shipped for a pair.

mgkgmc: Your down for belts visors and armrest. One armrest is nice the other appears to be sun burnt as the pics show. They are priced accordingly. The vent on the LH is fine, the RH looks to be slightly warped 7.50 and 4.00. The color is a medium/dark brown. I'm color blind too. I'm sure they are correct for the truck.


If I have missed anybody please let me know. Thanks, Tom

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Hey Tom, just posted a few questions about 10 minutes prior to your last post. Don't know if you seen it or not.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Do the upper bed moldings use the factory metal clips? If so, I would like to buy all the upper bed molding clips.
Let me know,
Casey

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Payment Sent...Thanks Dave

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

sjarrett71: Yes I missed it. It took me a bit to put that post all together (one letter at a time).
the shift linkage is sold.
the fitting and vac line is up for grabs. 3.00 extra for the factory fitting.

superchevy: this truck did not have the upper molding, sorry

Davedr: thank you

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I'll take the pair of exhuast brackets at 17.50 shipped
Just PM me

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Thanks for the offer but no, $75.00 total cost is already a stretch for me on that piece.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

PM me payment total with shipping to Rolla, MO 65401 and how you want paid please. Thanks.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Ok..you win! I'll do it for 75.00 shipped. Let me know if your still interested.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I appreciate you meeting my offer. However, I went back and looked through the thread again and noticed that you said that the master cylinder was bad. Also, it appears to be 3/4 booster but maybe that is just the angle of the picture.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

It is a dual diapham booster. Not sure if this the original type to the truck. The prior owner had mentioned that he replaced it recently so it may be off a 3/4t.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Thanks but I am looking for a 1/2 ton style. I already have a 3/4 ton setup.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

PM sent

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Payment sent. Thanks.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

would u sell the top bar to the grill?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Thanks for asking but, no. I want to keep it together. sorry

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Tom, Thank again. It was good to meet you today and look over all your old trucks.Kelly

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Kelly,
Your welcome and thank you. It was nice to meet you as well. Sorry I didn't have more time to show you around. It was a quite busy. Good luck on your build, it sounds like a very special truck.
Thanks, Tom

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

What kind of shape is inner cowl panel in?