Re: Project 78 High Sierra
 

Got a lil bondo on the fender dents, holes and used the excess on the lip of the hood.... need to do much more and sand it but this is all before it got dark

Re: Project 78 High Sierra
 

no i got a welder just haven't got the nerves to try it by my self might try it on these after market 73-80 fenders i got that i cant get rid of

Re: Project 78 High Sierra
 

i hear ya...Thats why i started on the inner fenders...Had to do it one way or another so :)

Re: Project 78 High Sierra
 

yep you just got to jump into it. practice your skills as you go along.

Re: Project 78 High Sierra
 

most deff.. i have done every thing else to my sept the welding that my dads but i think im going to get a roll of wire and try it out the next couple days on my 76

Re: Project 78 High Sierra
 

just go at it, with sheetmetal all you really need to do is spot weld and skip around alot. it is time consuming, but thats the only way to do it to avoid warping. which sucks.

Re: Project 78 High Sierra
 

I like your idea for paint combo.

Re: Project 78 High Sierra
 

How's it going? No updates!

Re: Project 78 High Sierra
 

no progress this weekend... I had a bachelor party to attend in ATL so I was out of town spending all my money!!! I did get a lil sanding on the first bit of bondo and put some more on it.

Should be back to it this weekend and maybe a few nights this week...

Re: Project 78 High Sierra
 

Allthough I really want to work on the fender and hood this weekend I have decided before I do any of that I am going to do the following:

Remove the driveshaft and replace the rear seal so it stops leaking.
Remove the speedo cable and grease it so it stops jumping and squeaking
Then I shall return to the body work and hopefully have the hood and fender prepped to go ahead and install

Re: Project 78 High Sierra
 

Sounds like a plan.
Posted via Mobile Device

Re: Project 78 High Sierra
 

Whenever you said ATL all I could think of was a lil jon song :lol:
Posted via Mobile Device

Re: Project 78 High Sierra
 

Well started the day greasing the speedometer cable only to remove the the gauge cluster and with just a slight move the corner that holds the shifter wire broke off...I tried to rig it up but no luck...But I did put the new lens cover on it to see the difference and it looks great....Ordered a new cluster for the backing plate.

Sanded down the fender bondo and hit the hole thing with high build primer only to find a bunch of lil dings on the front of it..So i will have to sand those spots down and bondo them

Also hit some more bondo on the hood under side edge and sanded the front bondo hole...

Re: Project 78 High Sierra
 

Looking good, keep on keepin on.

Re: Project 78 High Sierra
 

new gauge lens comparison

Re: Project 78 High Sierra
 

That lens looks great. Where did you order that from?

Re: Project 78 High Sierra
 

I ordered it from LMC! Its perfect.....

Re: Project 78 High Sierra
 

My ghetto hot glue and l bracked that didnt work

Re: Project 78 High Sierra
 

Gauges look nice bro. I see you work in your living room too.. :lol:

Re: Project 78 High Sierra
 

haha, yes sir.....Best lighting and i was watching the draft at the same time lol

Re: Project 78 High Sierra
 

Yep I was polishing center caps on my pool table the other day lmao

Re: Project 78 High Sierra
 

Got to work while hung over today and got some progress on the hood...

I hit it with 3 cans of high build primer....then had to sand the whole right side back down due to the scarring from removing the paint with a flap disc...Got most of the scarring off of it but still need to do more sanding...HIt it back with another 2 coats of primer and thats where it sits..


Also sanded down the bondo on the under edge where it was ful of holes and hit the bondo with some rust tough

Re: Project 78 High Sierra
 

Also got my new gauge cluster in.....Swapped all my gauges into it and cut the speedo and gas gauge to give it a little cleaner look...I suck at making stuff straight though

On the bright side i have a couple spare gauges and the circuit board was a lot better on the new one
Swapped the needles as well as they are brighter but the speedo one you cant do...erg broke the other speedos off...glad i started with the other one lol

Re: Project 78 High Sierra
 

Like the gauges
Posted via Mobile Device

Re: Project 78 High Sierra
 

Looking good.