Re: Schni's Blue 1983 K10
2 Attachment(s)
valve covers machined and put on, along with water pump and pulleys
Attachment 1607563 Attachment 1607564 |
Re: Schni's Blue 1983 K10
Nice numbers on the dyno!
|
Re: Schni's Blue 1983 K10
1 Attachment(s)
carb for the 496. holley 850
Attachment 1609325 |
Re: Schni's Blue 1983 K10
gotta a ton of work done this weekend. Gotta thank my friend Neil for all the help. wire wheeled and wire brushed the frame. used kbs coating products. used the degreaser 50/50 mixed with hot water. scrubbed it on frame with scotchbrite pads, then rinsed and let dry. then used metal etcher with scotchbrite. Painted. Right now its 24hrs dry. Tried kbs instead of por15. Not a big fan. Won't be buying it again. Seems to hold up well, but the finish is awful. Can't tell from pics. No problems with por15 before, and I even prepped better with this stuff than i ever did with por. By the way this was the satin black can, as you can see it turns out glossy. Still have to finish scuffing and top coating. Then I'm onto fixing the firewall and heater core that i manhandled and broke the fitting off.
|
Re: Schni's Blue 1983 K10
5 Attachment(s)
|
Re: Schni's Blue 1983 K10
5 Attachment(s)
|
Re: Schni's Blue 1983 K10
5 Attachment(s)
|
Re: Schni's Blue 1983 K10
2 Attachment(s)
|
Re: Schni's Blue 1983 K10
2 Attachment(s)
|
Re: Schni's Blue 1983 K10
Dammm thats one hell of a motor for that truck, I would be tempted to throw it in a muscle car haha. Should scoot pretty good with that.
|
Re: Schni's Blue 1983 K10
Yea, id like to build a nova. Maybe later I'll swap it over. A high revving 427 yenko clone would be pretty sweet though
|
Re: Schni's Blue 1983 K10
4 Attachment(s)
scuffed the kbs and top coated with vht chassis and rollbar paint. satin black. still need to dry a bit. the pics are 10 min after last coat. itll "dull" a hair more
Attachment 1609686 Attachment 1609687 Attachment 1609688 Attachment 1609689 |
Re: Schni's Blue 1983 K10
2 Attachment(s)
headers came in. since no one could help much with header selection, I went with the set one guy was running currently. they are hooker 2455 / 2455-1 / 2455-1HKR . They dont look to be kinda artwork, the finish seems a bit "halfass". Nonetheless if they work fine for such a cheap price i dont care. They have 2" primaries and 3.5" collectors
Attachment 1610054 Attachment 1610055 |
Re: Schni's Blue 1983 K10
2 Attachment(s)
heres how it turned out after the paint dried. looks great in my opinion. love this vht paint.
Attachment 1610297 Attachment 1610296 |
Re: Schni's Blue 1983 K10
3 Attachment(s)
Quote:
|
Re: Schni's Blue 1983 K10
painted the firewall, finished the ac delete. New heatercore, blower motor and heater box. Dropped in the engine and trans this weekend. Bought the cu-70013 griffin radiator and tci shifter.
|
Re: Schni's Blue 1983 K10
5 Attachment(s)
|
Re: Schni's Blue 1983 K10
5 Attachment(s)
|
Re: Schni's Blue 1983 K10
3 Attachment(s)
|
Re: Schni's Blue 1983 K10
looking good!
|
Re: Schni's Blue 1983 K10
5 Attachment(s)
Mounted my gauges and plumped them. Cleaning up wiring and running wires to roughy where they will be going. Got my headers pushed up to block, still need to mount them. Also found a couple more pics from when i dropped in the engine.
Attachment 1619459 Attachment 1619460 Attachment 1619461 Attachment 1619462 Attachment 1619463 |
Re: Schni's Blue 1983 K10
1 Attachment(s)
Attachment 1619466
Headers seem like they are going to fit with very minor adjustments. They are hookers 2455 headers. 2" primary and 3.5" collector. HKR2455 |
Re: Schni's Blue 1983 K10
Yep. Awesome.
|
Re: Schni's Blue 1983 K10
Been a while. finished my dana 60. just need to swap it over. motor went in last winter. had to change headers from the hookers due to fitment. they were very tight if i wanted to run any kind of exhaust. I ordered fenderwell headers from maddog headers and had them ceramic coated. They fit great and look awesome.
|
Re: Schni's Blue 1983 K10
1 Attachment(s)
motor in truck
Attachment 1769272 |
All times are GMT -4. The time now is 02:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com