Re: 1962 chevy c10 update.
 

Thanks for the tip and compliment. Those rattle cans sure been pissing me off. Thanks for your concern on my leg surgery. It's the first of two that hopefully will prevent full knee replacement.

Re: 1962 chevy c10 update.
 

Very nice job.

Re: 1962 chevy c10 update.
 

Wishing you a speedy recovery. Let me know if you need help with anything. Its been a year already since I came and got your wheels.

Bret

Re: 1962 chevy c10 update.
 

Finally got around to installing the radio in the truck. I wasn't digging the floor vents at all so I wanted to do something different. I saw that DLW had his speakers in the floor vents and it gave it clean look. So I cut some steel, painted it and mounted some 4in speakers and screwed them in place. It can be changed at any time I cut it from the vent design and used the original mounting screw holes. Here are the pics.

http://img.photobucket.com/albums/v3...ps133e8f6c.jpg

http://img.photobucket.com/albums/v3...ps0e9a0ec1.jpg

http://img.photobucket.com/albums/v3...ps2b7f8464.jpg

Re: 1962 chevy c10 update.
 

Attended my first coffee and cars this morning. I met a bunch of cool people, good coffee and saw some fine rides.

http://img.photobucket.com/albums/v3...psbb1bde3b.jpg

http://img.photobucket.com/albums/v3...ps45674c16.jpg

Re: 1962 chevy c10 update.
 

Radio looks great John. Which one did you go with? It looks to be one of the Ipod compatible ones.

Re: 1962 chevy c10 update.
 

Yes it is the IPOD one. It works great!

Re: 1962 chevy c10 update.
 

Nice build, saving it for later for a good read and info!

Re: 1962 chevy c10 update.
 

Thanks Cirussell. I hope you enjoy it!

Re: 1962 chevy c10 update.
 

Man that is a great looking 62. I can't wait until mine is up and running.

Re: 1962 chevy c10 update.
 

Thanks! I couldn't wait either.

Re: 1962 chevy c10 update.
 

Friday I took the fender off to try to get the door aligned. I had Bret (BJ383SS) come help me do it. After a couple of hours I think we finally got it aligned and found two other problems. One is the door seal and the latch. So now I have a new latch on order and the door is aligned better. Today I entered my truck in it's first car show. As of now all I have been doing was going to cruise Ins and get togethers. I wasn't expecting coming home with any trophies because I came late to the show. It turned out to be a good day, I came home with six and one of them was best in show. I guess we did a good job Bret getting that door aligned!

http://img.photobucket.com/albums/v3...pscb4szecb.jpg

http://img.photobucket.com/albums/v3...psmrb3gd7p.jpg

http://img.photobucket.com/albums/v3...psuitme4xr.jpg

http://img.photobucket.com/albums/v3...pssii5ho5w.jpg

Re: 1962 chevy c10 update.
 

Congrats on the new hardware!! Nice truck

Re: 1962 chevy c10 update.
 

Congrats, you did a great job and deserve it.

Re: 1962 chevy c10 update.
 

Congrats! Well deserved! :metal:

Re: 1962 chevy c10 update.
 

Nice build thread....I didn't know putting trophies on the mantel was doable....I thought it was for pictures of other peoples babies, candles and pope-puree :lol:

Re: 1962 chevy c10 update.
 

Thanks everyone for the responses. It's only temporary Joe. My wife says it all has to go in the garage. So now I have to find a place for them.
Posted via Mobile Device

Re: 1962 chevy c10 update.
 

Installed two inch lowering blocks on my 62 this week. When I removed the u bolts they were almost rusted thru. I guess I stopped a big problem in my future. My plans later on is to do drop spindles and springs when I do the brake upgrade. So for now 2 in the rear and torsion bar adjustment in the front. It came out good.

http://img.photobucket.com/albums/v3...ps5xix15ck.jpg

http://img.photobucket.com/albums/v3...ps3uc3vavb.jpg

Re: 1962 chevy c10 update.
 

Now your officially in the cool club :metal:

Re: 1962 chevy c10 update.
 

62Barnfind I just read through your build and a lot of your hard work has paid off, I like the Blue and also the white. Those wheels you chose really sets the truck off, Something about white wheels guess it gives it a cleaner look, my Hats off to ya, You done a good job and your truck shows it.....

Re: 1962 chevy c10 update.
 

Thanks! It took a while for me to get the right combo for the truck. I didn't like the black wheels with the blue and white bumpers. So I went with the wider smoothies in flat white that changed the whole appearance of the truck. Now I am trying to decide if I want to go back to the original Brigade blue. Thanks again!

Re: 1962 chevy c10 update.
 

Saturday I wen to a great car show in Lampasas Texas. The turn out was great for the old cars and trucks. While driving there I noticed the truck loosing power because 60 mph was hard to keep. After the show I was driving home and I couldn't keep 45 mph and the temp was rising in the engine, then all of a sudden something let go and the knocking started. All the valves are moving, nothing sticking out the side, no water in the oil and water is in the radiator. So I had to stop ad get trailered home. So now I have to go into the engine and see whats going on in there. Hopefully it is something easy and I don't have to replace the whole engine! If I do I guess a V8 swap will be next.

http://img.photobucket.com/albums/v3...psgg1cftb2.jpg

Re: 1962 chevy c10 update.
 

I hate to say but from what I can read I think a bearing slipped. Funny how the temp started rising though.....its as if it had a seizure and broke loose. Hope the problem is a simple one though. Would like to see the 6 cylinder in there. :chevy:

Re: 1962 chevy c10 update.
 

I agree with you about the bearing. I take it to the machine shop today to find out. I'm hoping that it can be fixed cause I really want to keep the six.

Re: 1962 chevy c10 update.
 

Yesterday I got the tired six out and ready for the machine shop. Still need to get the trans and bell housing off. I'm really hoping that it can be fixed so I can keep it. Today I'll find out what happened on the inside. So wish me luck! i have also been looking at other options for replacing the engine. Today will decide if the six is staying or a V8 is coming.

http://img.photobucket.com/albums/v3...pslkgwluyr.jpg

http://img.photobucket.com/albums/v3...psokjjs1wc.jpg

Re: 1962 chevy c10 update.
 

Those old straight six engines are pretty tough. I'd bet its fixable.

Re: 1962 chevy c10 update.
 

I finally got the word back on my 235. It spun a #3 rod bearing and no other damage in the engine. You can see in the pic of the head where the piston was hitting the head. So TJ another L6 saved! I took the crank to Waco to get turned and the local machine shop is doing the rest. The plan is to bore 30 over and put in hydraulic lifters, new performance cam and duel barrel carbs. So the ordering has started so when I get it back I will have everything to put it back together.
http://img.photobucket.com/albums/v3...psgag5dbmy.jpg

http://img.photobucket.com/albums/v3...psofb4t4kp.jpg

http://img.photobucket.com/albums/v3...psjjh54awh.jpg

http://img.photobucket.com/albums/v3...ps0xgjuxgw.jpg

Re: 1962 chevy c10 update.
 

Always happy to see another one saved. :metal: Well...that's one chamber with some relief. haha. Least it wasn't too major. :chevy:

Re: 1962 chevy c10 update.
 

The machine shop is still working on my 235. Just found out yesterday that the crank was bad and had to replace it. Lucky for me they had one and only cost me $150 the same as if they turned mine. I also I did some detailing of my accessories and I bought some performance toys for my engine. I'm hoping to get some horse power from the upgrades! Next step is to get the engine bay re painted and get all the parts for the engine in. It has been a bad time for the truck being down with all the shows and get togethers in the summer. I guess Ill be ready for next year!

http://img.photobucket.com/albums/v3...pso31z4hub.jpg

http://img.photobucket.com/albums/v3...psczeatztm.jpg

http://img.photobucket.com/albums/v3...pstpzfbmqh.jpg

Re: 1962 chevy c10 update.
 

Good to hear! Glad you kept the 235. Sure will be cool when its done! :metal:

Re: 1962 chevy c10 update.
 

Nice job saving the I6 and nice score on the crank!:metal:

Re: 1962 chevy c10 update.
 

Parts are looking good John. Love that intake and carbs you have there!

Re: 1962 chevy c10 update.
 

I'm still waiting on my engine to get back and no luck. It has been over 30 days and all the parts are still not here for the rebuild. So I have more detail on my accessories. I painted all my pulls and brackets and I restored my oil canister. I have two brake lines that are ran in the wrong place so I guess Ill redo those also. I guess the engine bay will be so nice since I have all this time.

http://img.photobucket.com/albums/v3...psyqhzj832.jpg

Re: 1962 chevy c10 update.
 

Don't feel to bad...I had to wait 3 months for my 292. Talk about Torture! ;)

Re: 1962 chevy c10 update.
 

It sucks! I.m missing a bunch of good shows in the area.
:waah:

Re: 1962 chevy c10 update.
 

The rebuild begins! I hope to have it back by Wednesday!

http://img.photobucket.com/albums/v3...psdexo9jzo.jpg

Re: 1962 chevy c10 update.
 

62 Barnfind, that's a SWEET looking intake setup!

Re: 1962 chevy c10 update.
 

Thanks! I did a lot of reading before I came to this set up. I called Tom Langdon stove bolt to finally decide what to do. I just can't wait to get my motor back and get it together.

Re: 1962 chevy c10 update.
 

Turbo would be cool! lol ;) Engine done yet? :mm:

Re: 1962 chevy c10 update.
 

I have to go back and check. The machinist found a possible 2nd bad rod. He told me if it is bad he will take care of it. I hope to get it back this afternoon or tomorrow morning. It has been a long wait.