![]() |
Re: SkinnyG's '61 Apache
Quote:
|
Re: SkinnyG's '61 Apache
Filler panel for the inner fender. The outer fender will be attaching to it from underneath, hence the holes.
https://www.gwellwood.com/wordpress/...7s-672x378.jpg |
Re: SkinnyG's '61 Apache
Wow. I have SO many hours into these inner fenders. Oh my gosh. And I'm out of MIG gas, on Christmas day.
https://www.gwellwood.com/wordpress/...1s-672x378.jpg |
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
Turns out I didn't cut the manifold at an angle for the v-band, and should have. So I cut it apart again and re-welded it.
Then spent the entire rest of the day trying to devised a mount which would hold the turbo while I fabricate the pipes to run it. Trying to get the right placement so the exhaust can feed it, so the turbo can expel, so the wastegate can be placed, so the turbo compressor can reach the intercooler, so the plugs can be reached, so the oil fill cap won't melt, so the heater hoses will clear, so the AC hoses will clear, so the filter will fit, so the hood will close......... Not really happy with the mount itself, but I think it's a good placement. https://www.gwellwood.com/wordpress/...4s-672x378.jpg |
Re: SkinnyG's '61 Apache
I have heard that the LS exhaust manifolds are cast steel instead of cast iron. Is that true?
|
Re: SkinnyG's '61 Apache
looking cool! following!
|
Re: SkinnyG's '61 Apache
Quote:
|
Re: SkinnyG's '61 Apache
:metal:very cool.
Quote:
|
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
I continue to enjoy your build.
Filler panel on the wheel arch looks good. I know nothing about building performance, but turbos turn me on. |
Re: SkinnyG's '61 Apache
Great work and nice video. Is this your home shop?
|
Re: SkinnyG's '61 Apache
It is my home shop.
I designed and built the shop myself, and did all the work from the concrete forms to the roofing shingles and everything inbetween except actually pouring the concrete and finishing the slab. This is the house that I will head to the old folks home from. Watching my dad sail into his infinity having never realized his dream of owning and working on antique automobiles, I decided I needed to built it. I did NOT want to sail into my infinity without chasing my dreams too. Rolled the cost all into a re-mortgaging of the house. The equipment has been amassing over the years. Some were sweet deals, some were cashing in gift cards. Some were "I will find a way to pay this off." I used to just work out of the two-car house garage, with my wife always having parking priority. But eventually more and more equipment came in, and then I had two project cars on the go, and then there was no room to work any more, and it was a whole lot less fun. The shop is 1065sqft, and pretty much as large as I am legally aloud to build. It's tucked right in close to the back of the property. The biggest drawback is I cannot get a tow truck or a dually into the backyard at all. But I can get my truck back there without even folding the mirrors in. |
Re: SkinnyG's '61 Apache
I forgot the most important part - I have a very loving and supportive wife. She's amazing. I'd do anything for her.
|
Re: SkinnyG's '61 Apache
Sounds like a great labor of love and looks like a great space to work. I'm in the "2" car garage stage of life currently with the wife and I having just built our first house a little over a year ago but we both know it's a stepping stone to our forever home. She's awesome enough to allow me to have the garage space as my space and doesn't question what shows up in there lol. Keep up the great work and thanks for the motivation!
|
Re: SkinnyG's '61 Apache
Quote:
Never forget that. I have always been fortunate there. You can thank your wife all the way from here, as I am pretty sure that for every one of her, there are five guys having their “balls broken” |
Re: SkinnyG's '61 Apache
Got some of the crossover done, and a couple more pieces of it ready to go. Hope to have more time tomorrow.
Got distracted adding rubber sealing flaps to the impeller vanes on my Bolens 824 snow blower. Now throws 3X farther, and never plugged up once!! https://www.gwellwood.com/wordpress/...8s-672x504.jpg https://www.gwellwood.com/wordpress/...7s-672x504.jpg https://www.gwellwood.com/wordpress/...6s-672x504.jpg |
Re: SkinnyG's '61 Apache
I spent about 4 hours behind my snow blower today. It sounds like I may be doing that again tomorrow or Monday. How hard was it to add those rubber wipers?
|
Re: SkinnyG's '61 Apache
I used some self-tapping screws and pounded them in with a cordless impact. It took a bit of time shaping the wipers to seal best against the housing, but I did mine wider than most people do.
Google "impeller mod" for snow blowers. I'm very impressed. |
Re: SkinnyG's '61 Apache
Crossover pipe done, waiting on 4" downpipe to come in:
https://www.gwellwood.com/wordpress/...0s-672x378.jpg https://www.gwellwood.com/wordpress/...1s-672x378.jpg |
Re: SkinnyG's '61 Apache
Still working out Argon flow, cup size, amperage, travel, etc.. I don't have a lot of experience welding stainless. And then ran out of Argon. Again.
https://www.gwellwood.com/wordpress/...2s-672x378.jpg https://www.gwellwood.com/wordpress/...3s-672x378.jpg |
Re: SkinnyG's '61 Apache
Nice job! I love the look of pie cuts
|
Re: SkinnyG's '61 Apache
Did not get as much done as I wanted. Saturday was filled with family stuff, so I only got 25% of what I wanted done.
Gas lens, pyrex cup, 3/32" tung, sharpened a little less pointy. I switched to 0.035" filler as recommended by a fabricator buddy. It was easier to move quick with the thinner filler. Running this pipe down was a lot less fun than it looks. I -can- actually get to the spark plugs. Needs another wiggle to get down to the frame, but it's close. https://www.gwellwood.com/wordpress/...4s-672x378.jpg https://www.gwellwood.com/wordpress/...5s-672x378.jpg |
Re: SkinnyG's '61 Apache
Wastegate plumbed. I TIG'd the merge into the downpipe, then TIG'd the elbow to the Wastegate flange, then cut a wee disc of 2.25" to fill the gap, welding it all in place so that (theoretically) nothing warps or moves during the weld. I've let it cool completely in place, and will see how bad it is later.
https://www.gwellwood.com/wordpress/...8s-672x378.jpg https://www.gwellwood.com/wordpress/...9s-672x378.jpg https://www.gwellwood.com/wordpress/...7s-672x378.jpg Working on the rest of the downpipe, intending to take it to a band clamp by the trans. |
Re: SkinnyG's '61 Apache
Trial fit of intercooler. Required some cutting of the rad support, but it looks like the grill will fit fine with zero cutting to it. I will likely do a light skiff of black paint to hide it better.
https://www.gwellwood.com/wordpress/...0s-672x378.jpg |
Re: SkinnyG's '61 Apache
Fabricating the cold side. I bought the wrong reducing elbow.
https://www.gwellwood.com/wordpress/...2s-672x378.jpg https://www.gwellwood.com/wordpress/...1s-672x378.jpg |
Re: SkinnyG's '61 Apache
The only silicone coupler I could get in town was a 3"-to-3.5", which I could NOT, for the life of me, get onto the LQ4 throttle body. I searched on eBay and bought a 3"-to-3-3/4" 90° elbow, which should be here in a week or more. In the mean-time, I threw a hose clamp on the 3"-to-4" 90° just to see if would even remotely tighten. Oh. Interesting. It does up and holds tight. Hmmm. Figures.
So, I piped the rest of the cold side, and since this picture was taken I welded the blow-off-valve mount in place. I have also spaced the rad out 1.25" to theoretically fit an AC condenser between the rad and the intercooler. https://www.gwellwood.com/wordpress/..._n-672x409.jpg https://www.gwellwood.com/wordpress/..._n-672x378.jpg |
Re: SkinnyG's '61 Apache
Nice job Skinny, looks great. If I keep reading this thread I'm going to end up with a turbo soon!
|
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
Progress is looking good. What size is your intercooler? Looks like it fits well and not much hacking on the core support.
|
Re: SkinnyG's '61 Apache
31x12x3" from VS Racing in their Denmah Billet 7875 kit. There was significant cutting to the core support, but no cutting to the grill (yet - I have not fitted the grill since completing the tubing).
|
Re: SkinnyG's '61 Apache
Now that the turbo plumbing is done (attached the blow-off valve, not shown), I really needed to know for myself if the hood will fit over the fenders.
First I had to re-shape the hood hinges. No room for springs, so the spring "ear" was cut off and re-flanged for strength. Then placed in the engine bay and clearanced for the fenders and flanged. https://www.gwellwood.com/wordpress/...5s-672x378.jpg The hood had about 5/8-3/4" trimmed off the inside edges around the wheel humps, and it fits! https://www.gwellwood.com/wordpress/...4s-672x378.jpg https://www.gwellwood.com/wordpress/...3s-672x378.jpg |
Re: SkinnyG's '61 Apache
Progress is looking great man. That hood is my favorite of all the hoods offered
|
Re: SkinnyG's '61 Apache
Oh, and here's the first of the "I clearly didn't plan this thoroughly enough:" the oil return I put in the pan is right where the motor mount ended up, which was too close to fit any of the AN fittings I have; they all hit the motor mount one way or another:
https://www.gwellwood.com/wordpress/...9s-672x378.jpg So I bought bought a 90° elbow, which didn't fit because now the flared end hit the motor. https://www.gwellwood.com/wordpress/...4s-672x378.jpg So I hacksawed it in half, cut it down, and re-welded it as a 45°. I'm sure you can buy these, but this was easy. https://www.gwellwood.com/wordpress/...8s-672x378.jpg Then I used a 45° AN fitting to get the hose to it. Looks like it will clear the AC compressor, and I'll likely put some rubber hose around the braiding so it doesn't machine its way through things. https://www.gwellwood.com/wordpress/...7s-672x378.jpg https://www.gwellwood.com/wordpress/...6s-672x378.jpg Except it looks like I clocked the turbo compressor and turbine in such a way that the supplied oil drain AN fitting (angled slightly to clear easily) won't fit. Figures. So I lengthened it two inches, and (what the heck!) ported the adapter for nice flow. https://www.gwellwood.com/wordpress/...4s-672x378.jpg https://www.gwellwood.com/wordpress/...5s-672x378.jpg Other than running the turbo oil feed (I need a 90° elbow so the hose won't kink/hit the hood), this concludes plumbing the turbo. |
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
1 Attachment(s)
hey brother! I'm still following along. I plan to use as much of your stuff as I can. In fact....does this cart look familiar?
|
Re: SkinnyG's '61 Apache
THAT'S COOL!
I'm VERY flattered! Nothing new to report, though. All my A/C components came in: under-dash unit, condenser, drier, hose kit, adapter to LS compressor, all for $405 CDN, shipped. Very pleased. Haven't fitted any of it yet. Spent last week swapping the drivetrain out of my 14 year old son's '03 Civic (3-part video on my youtube channel. Spent this week trying to resolve a drivability issue with my Super 7 replica, where it seems to be running on one cylinder. It's been kicking my butt, and I'll see tomorrow if I fixed it or not (runs like death when cold). Also cashed in some gift cards and bought a pressure sandblaster. I may regret that, but hiring out the blasting here is around $1500. |
Re: SkinnyG's '61 Apache
Checking in to see if there's been any updates...
|
Re: SkinnyG's '61 Apache
Please give us updates!! Damn Damn Fine job so far!!! Its like watching your favorite TV Show series and a season ends and you just sit there waiting for the first episode of the new season..... please.... lol
|
All times are GMT -4. The time now is 12:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com