Re: "Slowly but Surely" Big J's build thread...
3 Attachment(s)
Wow, all kinds of posts today on the Blazer board. I figure I'd better post a pic of what little I did, lol. I put the drivers door on. Thats mostly it, :lol:. I have some adjusting to do but its not far out. I put the plate around the door latch on the passenger door too. Got the hinges off, just need to rebuild them.
|
Re: "Slowly but Surely" Big J's build thread...
3 Attachment(s)
Got the hinges rebuilt tonight for the passenger door. Man that top hinge gave me fits. I used a torch to heat it and everything, even busted out the BFH! Ended up bending the hinge, good thing I had several laying around. I broke a punch too... It wasn't until I got to the third hinge that I was able to get it apart...... The door lined up pretty nice. I still have some adjusting to do but for the most part they look good. I plan on mounting up the outer rockers this weekend.
|
Re: "Slowly but Surely" Big J's build thread...
1 Attachment(s)
I almost forgot about the goodies!!! Heres all the stuff to get it ready for paint. Primers, filler, cleaner, primer gun, metal prep, sand paper, dura-blocks...... Gettin' there, "Slowly but Surely", :lol:.
|
Re: "Slowly but Surely" Big J's build thread...
Where did you get your paint supplies and how much did they cost
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
Thanks
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
Well with the advice a wisdom filled fellow board member I started pulling out and installing my new body mount set on this old frame. I really want the doors and outer rockers to line up the best they can so add one more step to this slow process:lol::lol::lol:. I should have all that done tomorrow night. I'm really wanting to get my outer rockers on so I can call the floors done!!!! Then on to the bedsides.... |
Re: "Slowly but Surely" Big J's build thread...
Way to go Big J, great progress!
|
Re: "Slowly but Surely" Big J's build thread...
4 Attachment(s)
Well this ended up being one of those weekends with lots of projects to do.... Not including the Blazer, lol.... I did get the doors all lined up nice and straight..... A shim here and a shim there along with some adjusting at the hinges... They came out nice... to me anyways, :lol:. I started fitting the drivers outer rocker. I've got it close to welding in. Hopefully I'll get some time this week to knock both of those out.
|
Re: "Slowly but Surely" Big J's build thread...
I haven't got much done...... The drivers outer rocker is ready to weld on. I'm going to throw a fender on to make sure but it looks pretty good right now. Maybe this weekend I'll actually get something done. I've been tinkering with a couple new mowers we picked up... Ones a John Deere 400 and the other is a Cub Cadet 2135. Fun stuff. Tinkering that is, not mowing, that just sucks :lol:. Neighbors giving me a hard time. I've got a mower collection going on, JD GT275, 216, 210, and the Cub 2135
I like lawn mowers, I really want a small tractor, oh well. Thats way down on the list. I've still got to pick up a new grill and paint and tires and etc......... It'll be worth all the blood, sweat, and tears when I get to drive it. Yes there were tears, lol.... After bloodying my knuckles I wasn't able to wipe the sweat out of my eyes quick enough so I teared up, :lol:. |
Re: "Slowly but Surely" Big J's build thread...
Keep going :metal:
Looks like the factory green on your firewall is the same as mine was. :mm: |
Re: "Slowly but Surely" Big J's build thread...
Doors look like they came out great, nice job.
What's next after the floors are finished? |
Re: "Slowly but Surely" Big J's build thread...
4 Attachment(s)
Quote:
Quote:
I got the drivers rocker done today and the passengers ready to weld up. I'd got more done if my mig hadn't been acting funny. Maybe tomorrow it will cooperate:lol: I also had to go play in the snow with the JD... We're supposed to end up with 6-13" of the white stuff. |
Re: "Slowly but Surely" Big J's build thread...
Try checking amps and volts, maybe something is sucking some of your current away....Dang PO's:lol:
|
Re: "Slowly but Surely" Big J's build thread...
Looking good man!
|
Re: "Slowly but Surely" Big J's build thread...
2 Attachment(s)
Well my mig worked great today.... Not sure what was going on yesterday. Its on its own circut so...... hmmm. Oh well, lol... I got the passenger rocker done. Yay!!!! floors are done!!!!!! I started on passenger wheel well while I had everything laying there. Its tacked in place and looks like it will turn out nice. I had to play in snow today, lol, we got like 14" and some big drifts. Theres 2-3 foot surrounding my little car.
|
Re: "Slowly but Surely" Big J's build thread...
Looks good J., nice to play in the workshop when the snow is on the outside...keep it up, I haven't done anything to mine in 2 weeks, so I enjoy looking at your pics.
|
Re: "Slowly but Surely" Big J's build thread...
Yeha I hate this snow I got to go clean the work parkin lot today.
|
Re: "Slowly but Surely" Big J's build thread...
5 Attachment(s)
Quote:
Quote:
Heres what got done this morning. Finished up the passengers wheel well. On to the drivers side, that dent is going to suck.... Probably won't mess with that until Wensday/Thursday.... |
Re: "Slowly but Surely" Big J's build thread...
1 Attachment(s)
Picked up one of those lights out of a late model Chevy...
Not sure where to put it but I've wanted one to go under the hood of the Blazer ever since first seeing one. Don't know why, lol... Doesn't take much to make me go "Cool, look at that":lol: |
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
2 Attachment(s)
Quote:
I talked to a very smart man at Hobart today and he told me what might be wrong with my mig. He said, "release the lock off the feed, lay the gun out straight from the welder, and pull the wire out with your thumb and pointer finger.... if ya can't then you have the drum to tight." Well I had the drum just a wee bit too tight. I loosened it up a little, and was just able to pull the wire out. It welds perfectly now... I don't know why it just started goofing up but oh well, its all good. It was doing better the other day but now it rocks, lol.... While I had it out I welded up the trim holes in the passenger bedside. Got something done anyways.... |
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
Well, now that Jamie mentioned it. I wasn't going to say anything, but what light? I see a remote control truck and a dremel :)
|
Re: "Slowly but Surely" Big J's build thread...
I saw it Big J, but then I've got an 89 so I know what they look like...I guess I cheated.
|
Re: "Slowly but Surely" Big J's build thread...
1 Attachment(s)
I figured someone was going to give me a hard time. :lol: Thats what happens when you work on your truck too much neglecting your other past times.... For those that can't see the light, lol... (now thats funny right there, you can take that two ways... can't see the light, lol) here is another pic.... Went to talk to a paint man, he's gonna teach me everything he knows. In the couple hours we B.S.'d he seems to know alot. All kinds of paint and body stuff. I've been wanting to paint my own stuff but was kinda skeered to......lol... I think I'll be doing it myself after talking to this feller.
|
Re: "Slowly but Surely" Big J's build thread...
Now I see the light :) literally
|
Re: "Slowly but Surely" Big J's build thread...
I saw the light a long time ago:lol:
|
Re: "Slowly but Surely" Big J's build thread...
whos painting it. i know a couple of painter over your way.
|
Re: "Slowly but Surely" Big J's build thread...
Quote:
|
Re: "Slowly but Surely" Big J's build thread...
i hope your at least going to claen that light up a little, going to look kinda out of place with all that new paint...imho i think the hardest part of paint is shooting it..get the gun set right, then practice... i got a couple you can paint for me, i won`t charge you too much..lol
|
Re: "Slowly but Surely" Big J's build thread...
toughest part of painting--is the prep and the patience to let stuff setup right. I can't do either!! My body work looks like chunky peanut butter spred with a spoon. My paint--either fish eyes, runs, oversprey, moisture, too cold, too hot, wrong primer, etc. etc.
I think I like primer!! |
Re: "Slowly but Surely" Big J's build thread...
5 Attachment(s)
Quote:
Quote:
Some more rust fixed today. Knockin' some stuff out this weekend. Hope to knock a bunch more out tomorrow!!! |
Re: "Slowly but Surely" Big J's build thread...
Good progress Big J.
And I agree...I'm going to paint mine myself as well! :metal: |
Re: "Slowly but Surely" Big J's build thread...
4 Attachment(s)
Quote:
Heres what got done today. I repaired the firewall, welded in some trim holes, fixed the front lip of the wheel well, and started banging out the dent. I brought it way out from where it was, take a look at post #179 to see the difference. Now its time to bust out the stud welder to finish it off. I'm going to make a clamp of sorts to try and pull out some dents without all the drama of the slide hammer. I'm going to use leverage instead of blunt force like the hammer does. We'll see if it works. |
Re: "Slowly but Surely" Big J's build thread...
3 Attachment(s)
You can get a good paint gun threw east wood for about $350. Heres some cars my dad painted at home in the garage. The tractors are what i have painted and turned out good. They were painted with the gun we bought from east wood,
|
Re: "Slowly but Surely" Big J's build thread...
3 Attachment(s)
I need some advice here. I think I have down what I need to do but I'd like to make sure before I do it, lol. I tried to pull the bedside dent out with studs. Its not going well.... I'm going to cut out/unbolt the piece that goes along the upper inside of the wheel well. Its bent in too. I figure if I fix the bedside then bang the upper piece into place it should work. Any opinions?
|
Re: "Slowly but Surely" Big J's build thread...
3 Attachment(s)
I wish I had more knowledge on dent work. Its coming out and is probably fine. But it'll bug me to no end unless I get it perfect, lol.... Its 90% better than it was. Oh well, I'll keep on it. I've got some new rubber coming so I've pulled my stock wheels to blast and paint. Chime in if you have any opinions on the dent, good or bad. Any tips would be great.
|
Re: "Slowly but Surely" Big J's build thread...
Hey J, Ron and I are coming up tomorrow to Huck's to pick up that blazer. Do you need anything from SOKY Classics that we could pick up for you and save you a trip.
Sorry, it's short notice. It just hit me to think about asking. Do you live close to Huck? |
Re: "Slowly but Surely" Big J's build thread...
Hey, Big, that dent looks kind of tough to describe.
From what I've read, you work dents from where they (originally) start out (point of impacl), and/or from worst to less er, bad. The idea is, that you/me beat out the creases and the bows come out on their own. you appear to have a nasty crease with no start or end. tap on both ends and hope for the best? I keep pounding body parts and the damage is different, but not better... |
All times are GMT -4. The time now is 04:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com