Re: Intro and Some Photos of my '63 Project
When there's a heatwave in my area, for some reason my parts are ready for paint and body work...ugh. Finished my little dash extension for the A/C vents and a couple of other items to be named later...
http://i268.photobucket.com/albums/j...psgm4qkgl9.jpg http://i268.photobucket.com/albums/j...psxbltd3vs.jpg |
Re: Intro and Some Photos of my '63 Project
Your truck is really nice and I very much enjoyed the read. Sub'd and following along...
|
Re: Intro and Some Photos of my '63 Project
Thanks! I mocked up my old Chevrolet Deluxe tissue dispenser...I had thought of selling it over the years, but I think I'll keep it for the truck...
http://i268.photobucket.com/albums/j...psatwhmfmt.jpg |
Re: Intro and Some Photos of my '63 Project
That is really cool, I love putting all sorts of era correct accessories in the interior of my truck
|
Re: Intro and Some Photos of my '63 Project
Thank you! I got some stuff back from coating and started to mock tank and bottle placements. Some calculation suggested I had a couple of gallons of air volume for the air suspension, so I need to locate the 3 gal. tank to the converted 15 lb. nitrous bottle to an air tank:
http://i268.photobucket.com/albums/j...pstm29ontp.jpg http://i268.photobucket.com/albums/j...psrxaz6awj.jpg |
Re: Intro and Some Photos of my '63 Project
I finally got my steering column and linkage installed last night...
http://i268.photobucket.com/albums/j...psdy7fiwzb.jpg http://i268.photobucket.com/albums/j...psy7nbb5rq.jpg |
Re: Intro and Some Photos of my '63 Project
Sweet build
|
Re: Intro and Some Photos of my '63 Project
Very cool...
|
Re: Intro and Some Photos of my '63 Project
Thanks, guys! I just realized this photo didn't upload that shows the steering link...
http://i268.photobucket.com/albums/j...ps6br7exag.jpg |
Re: Intro and Some Photos of my '63 Project
Machined the selector arm and beer tap handle base for a new shifter handle - North Coast Brewing Co. Puck the Beer porcelain beer tap handle...
http://i268.photobucket.com/albums/j...pstgycknzt.jpg http://i268.photobucket.com/albums/j...ps50xkn28w.jpg |
Re: Intro and Some Photos of my '63 Project
|
Re: Intro and Some Photos of my '63 Project
Beautiful build...
The pontiac mill is truly sweet. |
Re: Intro and Some Photos of my '63 Project
Thanks! I had to shift focus on my '63 Tempest convertible project since I got the Pontiac Trophy 4 (half a 389) 195 ci machining done, a cam from Bullet Racing delivered, and some goodies from Crower.
http://67-72chevytrucks.com/vboard/s...d.php?t=726399 |
Re: Intro and Some Photos of my '63 Project
The storms and heavy rain have me working on the C10 this weekend. I was able to set the wing window and door glass and get the Nu Relics power unit installed and tested.
http://i268.photobucket.com/albums/j...pslopcvhyi.jpg http://i268.photobucket.com/albums/j...psrdyxiqyt.jpg |
Re: Intro and Some Photos of my '63 Project
It's been a few years since I had the inner door panel installed...
http://i268.photobucket.com/albums/j...pst8mhboxs.jpg |
Re: Intro and Some Photos of my '63 Project
Good looking door
|
Re: Intro and Some Photos of my '63 Project
Finally got around to finishing up the MAR-K hidden tailgate latches and stainless links:
http://i268.photobucket.com/albums/j...ps5b6rziha.jpg |
Re: Intro and Some Photos of my '63 Project
Quote:
|
Re: Intro and Some Photos of my '63 Project
Passenger side glass set after struggling for a couple of hours with the vent assembly.
http://i268.photobucket.com/albums/j...pshcwyt1hu.jpg |
Re: Intro and Some Photos of my '63 Project
Hey, I have a quick question for you.
I'm building a new chassis for my prostreet and I'm wondering if you had ever thought of, or tried using A body motor perch brackets and mounts to set a pontiac into a C10. Any thoughts? |
Re: Intro and Some Photos of my '63 Project
That would offer more flexibility and parts availability. If I were building a new chassis, I would probably go that route if I didn't mount the engine on plates.
|
Re: Intro and Some Photos of my '63 Project
I'm trying to get the motor as low and as far back as possible.
Mocked up on a bare frame, it looks like A body headers will work too. Might be tight. I'll be checking that this weekend, hopefully |
Re: Intro and Some Photos of my '63 Project
Yep, that's what I was referring to about parts availability. A lot of times people change up or do custom mounts not realizing that it sometimes eliminates the use of readily available production headers/exhaust, steering parts, etc.
|
Re: Intro and Some Photos of my '63 Project
Finally got around to making the initial trim and fitment of the firewall pad and carpet. Need to do a little more persuading with the heat gun over a couple of floor contours, but the Auto Custom Carpet is molded nicely.
http://i268.photobucket.com/albums/j...psiiqltehn.jpg |
Re: Intro and Some Photos of my '63 Project
1 Attachment(s)
Halfway through with the bedwood treatment...urethane down and cured on the bottom side over red mahogany stain. Top side urethane is next.
|
Re: Intro and Some Photos of my '63 Project
Very nice! You dont waste any space do you
|
Re: Intro and Some Photos of my '63 Project
I'm a little surprised that you didn't go with a steel bed floor out of a 67-72...
Nearly 100% bolt in, lighter and longer lasting.... But I'm guessing you won't be tossing any virgin, grease covered tunnel port heads back there... |
Re: Intro and Some Photos of my '63 Project
1 Attachment(s)
Thanks! Here are the planks laid out after the last coat of urethane. I'll spend this coming weekend using a buffer and finishing it off with some synthetic wax sealer.
All of the used steel bed floors in my area were so beat up, plus I like the contrast of the wood bed. I've finished a few when I was younger...I just don't remember it requiring so much Tylenol. ;) I'm working on a sliding luggage rack for the bed with similarly stained and finished wood slats to make up for the space my nitrous and air suspension bottles will occupy. |
Re: Intro and Some Photos of my '63 Project
1 Attachment(s)
The Mar-K stainless strips are trimmed and laid out. I'll tighten everything down today, and get this bed ready to mount back on the chassis soon.
|
Re: Intro and Some Photos of my '63 Project
Going to the Pontiac heaven event?
|
Re: Intro and Some Photos of my '63 Project
Quote:
|
Re: Intro and Some Photos of my '63 Project
Well, that's been a while..
Sorry to hear that, I was hoping to see you and your truck in person. A kind of "shake a hand, make a friend" thing... |
Re: Intro and Some Photos of my '63 Project
I do have good friends and customers in AZ, and still travel out there from time to time to visit and help with their projects. Not sure if I would drive my truck all the way out there, but it would be great to catch up with you when I'm out that way.
|
Re: Intro and Some Photos of my '63 Project
1 Attachment(s)
Since none of the modern production wheels floated my boat, I un-retired some Ansen Sprints (15x7 fronts and 15x10 vintage rears) hanging in my shop office for the Poncho C10 project. I did some restoration work (ground out the dings and gouges, polished, then media blasted the centers). My friend runs a coating shop and had the centers coated in Titanium. Here's a sneak peek just out of the oven.
|
Re: Intro and Some Photos of my '63 Project
I like the look of the titanium along with the polished aluminum.
|
Re: Intro and Some Photos of my '63 Project
Nice i like em!!
|
Re: Intro and Some Photos of my '63 Project
Very good choice on the wheels!
|
Re: Intro and Some Photos of my '63 Project
2 Attachment(s)
Thanks! I got the tires mounted today...the rears are the older M/T ET Street Radials 315/60R15 (29.9x12.5x15)
|
Re: Intro and Some Photos of my '63 Project
1 Attachment(s)
Finally got to work on my own project last weekend and got the battery box mounted and assembled and soldered the 1/0 cables. Let the wiring madness begin.
|
Re: Intro and Some Photos of my '63 Project
4 Attachment(s)
Finally getting some pinstriping done on the PonchoC10 before the rest of the sheetmetal gets mounted back on the chassis. Brian Stoner of Stoner Striping working his magic on the back of the cab and hood...
|
All times are GMT -4. The time now is 05:13 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com