![]() |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
not to hard to tell, we're in our soaker season. stuck inside bored...but who dont like lookin' at pictures?
not a truck, but it's the Intimidator, built this right after he died. was in the shop noticing how scratched & hazed the case was & how dull & shabby looking his Monte was. was not thinking, should have took a before. added a little more detail, was able to touch up the black in a few spots, tire decals fell off, hit them with white (hand aint as steady as it used to be...), reset the decals & gave it a new coat of clear Attachment 1318773Attachment 1318774 Attachment 1318775Attachment 1318776 Attachment 1318777 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
even put a new coat of acrylic on the case, came out great, but cant get a good pic now cause of the glare...
Attachment 1318778 |
Re: '64 chevy 2wd to 4wd
It's all looking great..be glad you're getting rain. We're hoping to get rain, the drought is getting kinda scary. I'm actually taking the Harley for a ride today.
|
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
yeah, isn't that how it goes.... we're drowning & dying for sun, & your frying hoping for rain:dohh:
i hope you dont mind if i snag your slogan, wont fit on the boom, but it will fit across the front of the hood Attachment 1319390 |
Re: '64 chevy 2wd to 4wd
Quote:
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
this really bites not being able to get parts.
did get some of the int. & motor done... Attachment 1320263Attachment 1320264 Attachment 1320265Attachment 1320266 Attachment 1320267 |
Re: '64 chevy 2wd to 4wd
Interior looks great and so does the engine and trans. They have a lot of detail to them. I also noticed that the big block has ramhorn marigolds. ..;)
|
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
good eye Dale! thought i could sneak them in.:lol:
like i said, running low in the parts box & cant get nothing ordered right now, so it was just using what ya got. if my caster hurry's up his reconstruction, i'll order a few sets of these & swap them out Attachment 1320683 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yes! talk about good timing, my caster is open for buisness again.
been doing some work on the deck, added an air compressor, got some jerry cans & a few other things for it-hole in the hood is gone Attachment 1324786 added some expanded steel to the headache rack Attachment 1324785 raided my sons "too old too play with" toys & made some dollies from this old tonka Attachment 1324787 body sure was a pia. it orig had body molding that i had sanded off, but they kept "ghosting" threw the paint, which was why i prob decaled it the first time. they came threw after 6 or 7 sandings, so i sanded a divot down the trim till i KNEW they were gone, then filled in the depression with filler. took the weird vents off the headache rack, same drill as the body.... just painted, still have to detail & clear Attachment 1324783Attachment 1324784 |
Re: '64 chevy 2wd to 4wd
It's looking great. .. keep going. .good idea on the dollies.
|
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
thanks Dale!
what kind of stuff did you usually carry? i also got a fire ext, & a toolbox, & a bunch of chain-too much? not enuff? anything else? sadly i cant go white stripes & lettering-printer dont print white:dohh: so it will be red with black stripes & lettering (kinda sucks, really wanted white....:waah:) just slapped my order for everything in, so a bit of a hold....but before they get here, this should be here first....yeah, i got too many projects flipping threw my mind, but these dont come up often anymore (wish they would re-issue!) & i was totally surprised by the price i won it for, & it's one of my fav kits going to add this shortbox to it to make a longbox... Attachment 1324962Attachment 1324961 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
Quote:
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks OlBlue, have'nt got nothing much done the last week, was on a big downer 'bout my mastiff passing away....
still waiting for my tires & rims for my wrecker, & (surprise, surprise!) it's raining (almost inch & a half), so i decided to start my long box conversion while i'm waiting making lots of plasti-dust, tonight i will either have a LB or i will have wasted 2 short boxes.... Attachment 1329395 a little more on the '72, your right Dale, need a broom & shovel Attachment 1329396Attachment 1329397 Attachment 1329399Attachment 1329398 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
when the wife got home tonite, she was not impressed with me cutting up a new 40 buck model, was going to slap me up the side of my head if i wasted it....dodged a bullet....i think...
lots of cutting & sanding & then more sanding, & then i got a load of sanding ahead of me yet. actually missed the proper length by a 1/16", according to my rmr crew model i'm a bit short... Attachment 1329623Attachment 1329624 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
dont usually like having 2 or more junkers on the go, too easy to lose pieces with my house cleaning....but, rain, rain, & some more rain. we ought to build a pipeline down to you Dale, 60-80mm today (approx 2 1/2") on top of the inch & a half we had yesterday.... :banghead:
at least i dont need to worry 'bout the 'ol lady slappin' me in the head:lol: a little more finishing bodywork & i'll have me a longbox. need to stretch out the frame & d.shaft now... Attachment 1329750Attachment 1329751 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
alright! longbox is going back in the box for now, postman just dropped this off
Attachment 1329765 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
little more done....
standing on it's own susp. still got lots of small details to clean up. want to get this done & get back on the longbox before i tackle the peterbilt Attachment 1330646Attachment 1330647 |
Re: '64 chevy 2wd to 4wd
I just seen this. I have been doing autocad on the computer and coming up with different things.
The colors on the 64 was close to what I was doing except how was doing the colors. Here is what I was doing. This one is a 66 http://img.photobucket.com/albums/v1...psccfc246d.jpg |
Re: '64 chevy 2wd to 4wd
Quote:
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
caminokid, seen some of your other stuff on here, very cool but waiting for you to do a 4by:metal:
sweet OlBlue, always awesome to get up to the cabin. and i added another 1/16 on the longbox, not 'cause i'm a detail freak but the bedsides did'nt line up with the cab the greatest, show you later... '72 is done Attachment 1331779Attachment 1331780 Attachment 1331781Attachment 1331782 Attachment 1331783 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
few more...
Attachment 1331784Attachment 1331785 Attachment 1331786Attachment 1331787 Attachment 1331788 crap...i just realized i'm not done, looking at the pictures i see i forgot to put my mudflaps on, back on the bench... |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
my eyes, they must be going...i never noticed the blobs of super glue on the bottom of the cab, or the bumper hanging down untill i looked at the pictures....
straitening up the bumper was easy... Attachment 1332077 attaching the mudflaps was easy... Attachment 1332075Attachment 1332076 ended up meticulously sanding, masking, & respraying the bottom of the cab, real big pia, maybe next time i'll just leave it alone.... Attachment 1332074 |
Re: '64 chevy 2wd to 4wd
I think it looks great. I didn't notice the blobs but a lot of nice detail work....
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
been doing some box work one problem is the front of it is open (shortbox in the top left) allowing the fenders to bow in & not line up with the cab, as seen on this one i did about 10 yrs ago, which i'll haft to fix now.... Attachment 1333194Attachment 1333193 so i added a 1/16" front to the box, after i heated the sides & bent them to line up with the cab. almost exactly the length of this chev longbox. also added some styrene around the inner fenders, if you look at the first pic of the box you can see how lame they were... Attachment 1333196Attachment 1333195 lines up much better with the cab now Attachment 1333197 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
dont like the way it's lifted, blocks under the spring hangers-cheezy
cut the leaf packs off, will scratch some new ones, diff covers look like nothing i've ever seen, just happened to have 2 D60 covers, & the axles are way narrow, the tires just make it to the body, now they stick out a bit for that bulldog look. all rough right now, lots of sanding & filling to do... Attachment 1333200Attachment 1333198 started putting together a 454 & stretched out the frame Attachment 1333199Attachment 1333201 Attachment 1333202 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
waiting for the body, axles & block to dry (primer & filler), staring at it & decided it needs a canoe. kinda modeled it after an old coleman canoe i had.
only piece of .015 styrene i have, got some nice dents & creases in it, & instead of a scale 14 footer, this piece is only big enuff for a scale 13 ft Attachment 1333546 some scissor work & a bend Attachment 1333547 some super glue Attachment 1333548 and some seats & interior ribbing took me a little over an hour to scratch it up Attachment 1333549 have to make a rack now Attachment 1333550 |
Re: '64 chevy 2wd to 4wd
You sure make the canoe look easy. Looking good.
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
it REALLY was easy Dale, just like cutting out snowflakes at school-but....i have now spent about 3 hrs muddin' & sandin" & muddin' & more sanding. like i said, that .015 had a lot of dents & creases in it, once i primed it, it looked like an old aluminum canoe someone beat up with a rock (and it's supposed to resemble a fiberglass canoe....)
Attachment 1334955 we finally caught a break in the weather & have crammed 3 weeks of work into 4 days, so not a lot of progress....untill today, another 2-3 inches of rain:waah: axles mostly done, some work on the 454, & just started mounting the fr springs Attachment 1334956Attachment 1334957 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yeah, it's not a truck, but my 10 yr old son has been working on this for 6 months. he lost the .30 cal gun & the wind kinda went out of his sails for a few months. the other day i made a quick hatch cover to go over the hole, & he's all gung-ho again. last nite he sprayed his first model (first two he brush painted), & he cant wait until tonite to paint the guns, seat boards & install the treads
Attachment 1335009Attachment 1335010 he built the entire thing, all i did was make a hatch for it & helped him square up all the body pieces, rest of it is all him, even all those stupid little tread rollers.... (i try NOT to help him if i can help it....) Attachment 1335007 couple pics of the "mini-master" at work Attachment 1335006Attachment 1335008 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
little more done, another typical gm interior....
Attachment 1335901 almost got the susp. done Attachment 1335903Attachment 1335905 de-chromed the chrome spokes & turned them into white spokes, should give a good contrast to the paint, rootbeer brown Attachment 1335906Attachment 1335907 |
Re: '64 chevy 2wd to 4wd
1 Attachment(s)
just finishing up the plug wires on the 454.
and my boy got his guns painted & treads on, will let the paint cure a couple days then decal it up & weather it some if he wants Attachment 1335908 |
Re: '64 chevy 2wd to 4wd
The tank is looking pretty good so is the interior. We finally got some rain here and snow at my cabin..
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yay! your drought maybe coming to an end Dale? was reading somewhere like how it's been 3 yrs there with hardly anything. which is funny because most of our rain comes up from the south on tropic currents....
with christmas & doing all the fam-damily stuff, my longbox has been kinda simmering lately. off work for a week, so i'd like to try get it cleaned up 'fore the new yr. 454 is pretty much done (bb exhaust Dale:lol:) Attachment 1339794Attachment 1339795 susp. almost there, need to put the shocks on, steering gear, brake lines & u-bolts Attachment 1339796 didn't like the size of the canoe, so... Attachment 1339797Attachment 1339798 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
Attachment 1339801Attachment 1339805
Attachment 1339807 just finished digging threw a box of junk & found this, forgot all about it (was debating about using it on the '64 ) thinking i mite de-chrome the bumpers & mirrors, paint 'em white to match the rims.... Attachment 1339808 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
was hoping to finish it this weekend, had a primer fiasco....
had enough good stuff to do the box, used some other crap for the cab & hood-big mistake.....top coat kept on cracking & hazing, so i chucked it in the stripping tank. gave me a chance to fix & replace the drip rails & rear window trim (my eyes, missing all kinds of stuff lately....) Attachment 1341313 keeping with a basic truck theme, chrome had to go. filled the turn signals, pushbar holes, & added a piece of checkerplate to the r bumper Attachment 1341314 Attachment 1341315 added some fender braces Attachment 1341316 at least i got one thing done.... Attachment 1341317 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
i'll clear the bed when i do the rest of the body...real rubber bed mat
Attachment 1341322Attachment 1341323 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
little bored, waiting for stuff to dry
got almost 8 trucks & one car this yr. wish my bank account was as big as my imagination....get more done builds of 2014 Attachment 1341325 Attachment 1341326 Attachment 1341327 Attachment 1341329 Attachment 1341330 |
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
Attachment 1341338
Attachment 1341339 and this, still not sure why...i do have crusher plans for it... Attachment 1341340 |
Re: '64 chevy 2wd to 4wd
It's looking great, nice job on the bumpers. I've enjoyed watching all your builds this year and looking forward to next year. I hope your holidays went well. I met my oldest daughter, son in law and 4 year old grand daughter at my cabin. I enjoyed watching them play in the snow while I had sat on the porch and stayed warm....
|
All times are GMT -4. The time now is 06:16 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com