![]() |
Re: LS swappers, post up your pics!!
2 Attachment(s)
I don't think I posted a completed pic... Slapped it together and drove it all summer and I was very impressed with the power of the LS.
|
Re: LS swappers, post up your pics!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^
sick looking truck! |
Re: LS swappers, post up your pics!!
Thanks, it was nice to finally drive again after 8yrs of being apart.
Trevor |
Re: LS swappers, post up your pics!!
Quote:
|
Re: LS swappers, post up your pics!!
Getting closer to firing it up! The headers are due back from hot coat any day now.
http://i823.photobucket.com/albums/z...t/engframe.jpg |
Re: LS swappers, post up your pics!!
Not pics but a couple vids of the first start of mine.
|
Re: LS swappers, post up your pics!!
Here is my project. 1965 fleet side short bed. 2005 5.3L with LS6 intake, ported DBW throttle body. Comp Cams LSR cam .604/.610 lift. LS Engine Dual Valve Spring Kit with Comp push rods. The trans is a 4L60E built by a friend of mine. The rear end is new with Aburn posi with 3.73 gears. I converted the wiring harness with help from LT1 swap.com. It's coming together slow but steady.
The way I purchased it: http://i1224.photobucket.com/albums/...roject/380.jpg http://i1224.photobucket.com/albums/...roject/383.jpg The frame done with fresh powder coating: http://i1224.photobucket.com/albums/...t/IMG_1343.jpg Ready for the install: http://i1224.photobucket.com/albums/...transplant.jpg Installed and ready for the wiring: http://i1224.photobucket.com/albums/...IMG_1794-1.jpg Hopefully will be ready for the summer cruising!!!!!!:chevy: |
Re: LS swappers, post up your pics!!
1 Attachment(s)
Getting close to finishing. I have 90% of all the parts to complete the swap. thebuilt 4L65E trans is coming this saturday and the Harness from S&S performance should be here within the next two weeks. This puppy should be up and running by the end of this month. i also picked up a 56 stepside with 80k original miles on the clock. Gotta finish the 84 b4 I can play with the 56. lol.
|
Re: LS swappers, post up your pics!!
|
Re: LS swappers, post up your pics!!
lq9 6.0 tsp 228r, double 650 valve spring, hooker super comp long tubes, black bear tune, and a stock 4l80e with shifts firmed from tune
http://i147.photobucket.com/albums/r...gc10/007-5.jpg |
Re: LS swappers, post up your pics!!
This thread is awesome! keep up the good work.
|
Re: LS swappers, post up your pics!!
2 Attachment(s)
Got my headers installed.:metal:
|
Re: LS swappers, post up your pics!!
3 Attachment(s)
some pics of mine...ready to do the swap as soon as the weather warms up!......86 c10, '04 lq4/4l80e.
|
Re: LS swappers, post up your pics!!
That trans looks real nice. Motor looks great too. Hope to see some installed pics soon. Will make for a sweet truck.:metal:
|
Re: LS swappers, post up your pics!!
|
Re: LS swappers, post up your pics!!
That is one clean swap. Burb looks pretty good too!
|
Re: LS swappers, post up your pics!!
Quote:
|
Re: LS swappers, post up your pics!!
Got the lq4 started this weekend. This is a short clip of the first start up. The engine sounds good and has quick revs. Aluminum flywheel and a good tune help the revs. I can't wait to get it on the road but I have a lot of work yet before that happens.
http://www.youtube.com/watch?v=JrE2u...ature=youtu.be |
Re: LS swappers, post up your pics!!
Quote:
|
Re: LS swappers, post up your pics!!
Quote:
|
Re: LS swappers, post up your pics!!
1 Attachment(s)
it fits
|
Re: LS swappers, post up your pics!!
4 Attachment(s)
Here's a few of mine, its out of an 05' Chevy SSR. We made the headers, put an edelbrock pro-flo intake, corvette water pump and front brackets, SLP under drive harmonic balancer
|
Re: LS swappers, post up your pics!!
I'm lovin that edelbrock intake...
|
Re: LS swappers, post up your pics!!
Yes I was just thinking the same thing. That is a good looking intake.
|
Re: LS swappers, post up your pics!!
Quote:
Quote:
|
Re: LS swappers, post up your pics!!
Quote:
|
Re: LS swappers, post up your pics!!
Quote:
|
Re: LS swappers, post up your pics!!
3 Attachment(s)
i have pics of the engine bay on my phone ill get posted up later.
|
Re: LS swappers, post up your pics!!
Quote:
that is a awsome awsome looking set-up you have there that intake makes the whole engine bay look sweet as hello |
Re: LS swappers, post up your pics!!
5 Attachment(s)
79 chevy k10 5.3 out of a wrecked avalanche
|
Re: LS swappers, post up your pics!!
2 Attachment(s)
It's getting MUCH closer to being completed & is now running & driving as well!!! Engine & engine bay will be painted & detailed once it gets to Novelli Rod & Custom.
|
Re: LS swappers, post up your pics!!
Mine's not as old as the rest of yours but here is my 93 Silverado with 5.3L/5speed swap.
2004 5.3L DBW original NV3500 trans (for now, I have a 4500 thats going in it soon) Harness and tune by PSI (Performance Systems Integration) Transdapt mounts Schoenfeld headers 34" big block radiator 06 Silverado electric fans tons of other small things http://i135.photobucket.com/albums/q...o/IMAG1501.jpg http://i135.photobucket.com/albums/q...01222149_o.jpg |
Re: LS swappers, post up your pics!!
How do like the fitment of the schoenfelds & transdapt adapters?
|
Re: LS swappers, post up your pics!!
Quote:
|
Re: LS swappers, post up your pics!!
1 Attachment(s)
New motor 2003 5.3L w/ milled 799 heads, comp cam, tbss intake mani, fast 92, 2002 F-body headers, Summit UD pulley, th400, 3500 stall. runs 12.8 @98.36
|
Re: LS swappers, post up your pics!!
Quote:
Posted via Mobile Device |
Re: LS swappers, post up your pics!!
yeah those 3 piece covers look much better then most of whats available... for the trucks.
|
Re: LS swappers, post up your pics!!
Thanks guys! The headers fit great and Im pleased with them. However the black coating they came with was almost wore off in the box, so I ceramic coated them before putting them on.
|
Re: LS swappers, post up your pics!!
Quote:
http://i137.photobucket.com/albums/q...1/IMG_6111.jpg http://i137.photobucket.com/albums/q...1/IMG_6102.jpg http://i137.photobucket.com/albums/q...1/IMG_6101.jpg |
Re: LS swappers, post up your pics!!
Hey gents, I have a question....
My 68 has the LS1 in it, and i have been using a Mr. Gasket/Spectre universal throttle cable, since i am using the factory C10 pedal. The only issue is that i have replaced this sucker 3 times already, and it just broke again. I am tired of replacing this with something that will fail again. What are you all using for your throttle cable?? I know a lot of you guys are running the DBW setup, but this is more directed at the cable swappers Any Help would be greatly appreciated!! |
All times are GMT -4. The time now is 08:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com